Messages in this thread | | | Date | Wed, 13 Dec 2006 11:41:12 +0000 | From | Gavin Hamill <> | Subject | tg3 + BCM5721 : eth1 detected yet 'No such device' |
| |
Hello. I'm only able to use one of the two onboard Gig-eth NICs on this HP DL145 G2 with Debian etch (2.6.18-based) yet both are detected and shown by dmesg. The NIC marked as '2' on the back of the machine becomes eth0, whilst 'eth1' seems to vanish into the ether (if you'll excuse the pun).
tg3.c:v3.65 (August 07, 2006) ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 16 GSI 18 sharing vector 0xE1 and IRQ 18 ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNK1] -> GSI 16 (level, high) -> IRQ 225 PCI: Setting latency timer of device 0000:02:00.0 to 64 eth0: Tigon3 [partno(BCM95721) rev 4101 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:17:08:92:37:6f eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 19 GSI 19 sharing vector 0xE9 and IRQ 19 ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNK4] -> GSI 19 (level, high) -> IRQ 233 PCI: Setting latency timer of device 0000:03:00.0 to 64 eth1: Tigon3 [partno(BCM95721) rev 4101 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:17:08:92:37:6e eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[1] TSOcap[1] eth1: dma_rwctrl[76180000] dma_mask[64-bit]
hash:~# mii-tool eth0 eth0: negotiated 100baseTx-FD flow-control, link ok hash:~# mii-tool eth1 SIOCGMIIPHY on 'eth1' failed: No such device
hash:~# ifconfig eth0 | head -1 eth0 Link encap:Ethernet HWaddr 00:17:08:92:37:6F hash:~# ifconfig eth1 | head -1 eth1: error fetching interface information: Device not found
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5721 Gigabit Ethernet PCI Express (rev 11) 03:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5721 Gigabit Ethernet PCI Express (rev 11)
02:00.0 0200: 14e4:1659 (rev 11) 03:00.0 0200: 14e4:1659 (rev 11)
Same behaviour with tg3 v3.66 directly from http://www.broadcom.com/docs/driver_download/570x/linux-3.66d.zip
Same behaviour also with Ubuntu dapper (2.6.15).
SSH access to the machine is available if desired :)
Cheers, Gavin. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |