Messages in this thread | | | Date | Thu, 09 Nov 2006 17:08:46 +0100 | From | Olivier Nicolas <> | Subject | Re: 2.6.19-rc5 x86_64 irq 22: nobody cared |
| |
Takashi,
You are right, setting disable_msi=1 as an option for snd-hda-intel module solve my problem.
Thanks
Olivier
Takashi Iwai wrote: > At Thu, 9 Nov 2006 07:49:56 +0100, > Adrian Bunk wrote: >> On Wed, Nov 08, 2006 at 01:44:29PM +0100, Olivier Nicolas wrote: >> >>> Hi, >> Hi Olivier, >> >>> 2.6.19-rc5 does not boot properly, I have tried pci=routeirq, irpoll >>> without success. >>> >>> Full details (.config, dmesg, /proc/interrupts) are in >>> http://olivn.trollprod.org/2.6.19-rc5-irq.tar.gz >> thanks for your report! >> >> I might be wrong, but looking at the dmesg: >> - irq 22 is the hda_intel IRQ >> - the "irq 22: nobody cared" is immediately before the >> "hda_intel: No response from codec, disabling MSI..." >> - in the routeirq case, the hda_intel IRQ as well as the >> IRQ in the error message change to 21 >> >> So it might be related to the hda_intel MSI check. > > To disable MSI from the beginning, set disable_msi=1 module option for > snd-hda-intel. > > > Takashi
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |