![]() | |||||||||||||
Messages in this thread |
Hi, 2.6.19-rc5 does not boot properly, I have tried pci=routeirq, irpoll without success. Full details (.config, dmesg, /proc/interrupts) are in http://olivn.trollprod.org/2.6.19-rc5-irq.tar.gz Olivier System: ASUS M2N32-SLI, AMD64 X2 Dual Core 4600 kernel 2.6.9-rc5 irq 22: nobody cared (try booting with the "irqpoll" option) Call Trace: <IRQ> [<ffffffff80259055>] __report_bad_irq+0x35/0x90 [<ffffffff802592d3>] note_interrupt+0x223/0x280 [<ffffffff80259d41>] handle_fasteoi_irq+0xb1/0xf0 [<ffffffff8020b17c>] call_softirq+0x1c/0x30 [<ffffffff8020d1ba>] do_IRQ+0x8a/0xe0 [<ffffffff8020a571>] ret_from_intr+0x0/0xa <EOI> handlers: [<ffffffff8807f150>] (nv_generic_interrupt+0x0/0xc0 [sata_nv]) Disabling IRQ #22 CPU0 CPU1 0: 223 45540 IO-APIC-edge timer 1: 1 402 IO-APIC-edge i8042 6: 1 4 IO-APIC-edge floppy 8: 0 0 IO-APIC-edge rtc 9: 0 0 IO-APIC-fasteoi acpi 12: 0 103 IO-APIC-edge i8042 14: 7 140 IO-APIC-edge ide0 16: 0 0 IO-APIC-fasteoi libata 17: 0 10 IO-APIC-fasteoi bttv0 20: 0 20 IO-APIC-fasteoi ehci_hcd:usb1 21: 0 0 IO-APIC-fasteoi libata 22: 214 99786 IO-APIC-fasteoi libata, HDA Intel 23: 76 6230 IO-APIC-fasteoi libata, ohci_hcd:usb2 308: 5 3169 PCI-MSI-edge eth1 309: 0 10 PCI-MSI-edge eth1 310: 0 44 PCI-MSI-edge eth1 311: 1 3193 PCI-MSI-edge eth0 312: 0 0 PCI-MSI-edge eth0 313: 0 1 PCI-MSI-edge eth0 NMI: 64 68 LOC: 45716 45691 ERR: 0 kernel 2.6.19-rc5 with pci=routeirq irq 21: nobody cared (try booting with the "irqpoll" option) Call Trace: <IRQ> [<ffffffff80259055>] __report_bad_irq+0x35/0x90 [<ffffffff802592d3>] note_interrupt+0x223/0x280 [<ffffffff80259d41>] handle_fasteoi_irq+0xb1/0xf0 [<ffffffff8020b17c>] call_softirq+0x1c/0x30 [<ffffffff8020d1ba>] do_IRQ+0x8a/0xe0 [<ffffffff802092f0>] default_idle+0x0/0x50 [<ffffffff8020a571>] ret_from_intr+0x0/0xa <EOI> [<ffffffff80209319>] default_idle+0x29/0x50 [<ffffffff8020939b>] cpu_idle+0x5b/0x80 [<ffffffff8050039c>] start_secondary+0x50c/0x520 handlers: [<ffffffff880e6fd0>] (usb_hcd_irq+0x0/0x60 [usbcore]) Disabling IRQ #21 CPU0 CPU1 0: 214 24856 IO-APIC-edge timer 1: 0 359 IO-APIC-edge i8042 6: 0 5 IO-APIC-edge floppy 8: 0 0 IO-APIC-edge rtc 9: 0 0 IO-APIC-fasteoi acpi 12: 0 103 IO-APIC-edge i8042 14: 0 128 IO-APIC-edge ide0 16: 0 0 IO-APIC-fasteoi libata 17: 1 2 IO-APIC-fasteoi bttv0 20: 22 6469 IO-APIC-fasteoi libata 21: 11 99989 IO-APIC-fasteoi ehci_hcd:usb2, HDA Intel 22: 0 1 IO-APIC-fasteoi libata, ohci_hcd:usb1 23: 0 0 IO-APIC-fasteoi libata 308: 8 2378 PCI-MSI-edge eth1 309: 0 9 PCI-MSI-edge eth1 310: 0 9 PCI-MSI-edge eth1 311: 4 2401 PCI-MSI-edge eth0 312: 0 0 PCI-MSI-edge eth0 313: 0 1 PCI-MSI-edge eth0 NMI: 74 47 LOC: 25024 24991 ERR: 0 kernel 2.6.19-rc5 with irqpoll Hang during boot (See screenshot in http://olivn.trollprod.org/2.6.19-rc5-irq.tar.gz) kernel 2.6.18 (works without any problem) CPU0 CPU1 0: 1590 998089 IO-APIC-edge timer 1: 2 657 IO-APIC-edge i8042 6: 0 5 IO-APIC-edge floppy 8: 0 0 IO-APIC-edge rtc 9: 0 0 IO-APIC-level acpi 12: 194 59353 IO-APIC-edge i8042 14: 13 6381 IO-APIC-edge ide0 50: 0 0 IO-APIC-level libata 58: 0 0 IO-APIC-level libata 66: 109 181425 IO-APIC-level libata, nvidia 74: 41 963 IO-APIC-level ehci_hcd:usb1, HDA Intel 82: 4 6 IO-APIC-level bttv0 90: 0 0 PCI-MSI-X eth0 98: 3 0 PCI-MSI-X eth0 106: 212234 0 PCI-MSI-X eth0 114: 532 0 PCI-MSI-X eth1 122: 445 0 PCI-MSI-X eth1 130: 212217 0 PCI-MSI-X eth1 233: 73 23009 IO-APIC-level libata, ohci_hcd:usb2 NMI: 99 104 LOC: 999684 999664 ERR: 0 MIS: 0 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/ | ||||||||||||
| Last update: 2006-11-08 12:47 [from the cache] ©2003-2008 | |||||||||||||