lkml.org 
[lkml]   [2006]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectIDE cs5530 hda: lost interrupt
Hi all,

any help is wellcome...

--------------------
CPU: NSC Geode(TM) Integrated Processor by National Semi stepping 02
...
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
CS5530: ide CONTROLLER AT pci SLOT 0000:00:12.2
CS5530: chipset revision 0
CS5530: not 100% native mode: will probe irqs later
PCI: Enabling bus mastering for device 0000:00:12.2
PCI: Setting latency timer of device 0000:00:12.2 to 64
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pio
hda: CF 32MB, CFA DISK drive
hda: IRQ probe failed (0xfeba) >>> I think my problem may start here,
but when I fix to IRQ 14 in try_to_identify() to hda the problem persist
ide0 at 0x1f0-0x1f7,0x3f6 on irq14
hdc: Hitachi CV 5.1.1, CFA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15 (serialized with ide0)
hda: max request size: 128KiB
hda: 62976 sectors (32MB) w/1KiB Cache, CHS=492/4/32
hda:<4>hda: lost interrupt
hda: lost interrupt
hda: lost interrupt
...
hd1
hdc: max request size: 128KiB
hdc: 31488 sectors (16 MB) w/1KiB Cache, CHS=246/4/32
hdc: hdc1
USB Universal Host Controller Interface driver v3.0
...
INIT: ...
---------------
when I look in my /proc/interrupts I see something strange

0: 929785 XT-PIC timer
1: 128 XT-PIC I8042
2: 0 XT-PIC cascade
6: 3 XT-PIC floppy
8: 0 XT-PIC rtc
14: 2 XT-PIC ide0 >>> just 2 interrupts
15: 2964 XT-PIC ide1
NMI: 0
ERR: 0

pci devices (lspci)

00:00.0 Class 0600: 1078:0001 - Host bridge: Cyrix Corporation:PCI Master
00:12.0 Class 0601: 1078:0100 - ISA bridge: Cyrix Corporation:5530
Legacy [Kahlua] (rev 30)
00:12.1 Class 0680: 1078:0101 - POWER interface: Cyrix Corporation:5530
SMI [Kahlua]
00:12.2 Class 0101: 1078:0102 - IDE interface: Cyrix Corporation:5530
IDE [Kahlua]
00:12.3 Class 0401: 1078:0103 - Multimedia audio controller: Cyrix
Corporation:5530 Audio [Kahlua]
00:12.4 Class 0300: 1078:0104 - VGA compatible controller: Cyrix
Corporation:5530 Video [Kahlua]
00:13.0 Class 0c03: 0e11:a0f8 - USB open host controller: Compaq
Computer Corporation: ZFMicro Chipset USB (rev 06)

this is my machine configuration:
- GEODE GX1 BGA 200MHZ
- 64MB
- CS5530 with 2 controllers IDE master primary CompactFlash and master
secondary, without slave connectors.

I tried all of present configurations from ide.txt and all that I found
in the internet about this, and ever I get lots of <hda: lost interrupt>.
The incredible is that hdc work fine, and I undertand why.

Yes I tried all
- ide=nodma
- hda=noprobe
- set default values to ide0
- ide0=serialize ide1=serialize
- disabling acpi and apic
- chage CompactFlash
- checking

thank´s

--
[]´s Saulo Alessandre


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-11-08 22:09    [W:0.581 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site