lkml.org 
[lkml]   [2006]   [Nov]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: SATA ICH5 not detected at boot, mm-kernels
On Sun, 5 Nov 2006 15:36:33 +0100
Fabio Coatti <cova@ferrara.linux.it> wrote:

> Hi all; It seems that problems like this has been already reported, but not
> exactly the same, so maybe thsi can add some infos. Otherwise, sorry for the
> noise.
>
> Starting from 2.6.19-rc1-mm1 and up to rc4-mm2, at boot the kernel is unable
> to detect two sata disks, connected to a ICH5 controller. Latest mm working
> kernel seems to be 2.6.18-mm3; 2.6.19-rc4 works just fine.
>
> On rc-4 (vanilla) the log is this:
> Nov 5 13:26:37 kefk libata version 2.00 loaded.
> Nov 5 13:26:37 kefk ata_piix 0000:00:1f.2: version 2.00ac6
> Nov 5 13:26:37 kefk ata_piix 0000:00:1f.2: MAP [ P0 P1 IDE IDE ]
> Nov 5 13:26:37 kefk ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level,
> low) -> IRQ 17
> Nov 5 13:26:37 kefk ata: 0x170 IDE port busy
> Nov 5 13:26:37 kefk ata: conflict with ide1

hm. What does that mean?

> Nov 5 13:26:37 kefk PCI: Setting latency timer of device 0000:00:1f.2 to 64
> Nov 5 13:26:37 kefk ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xF000
> irq 14
> Nov 5 13:26:37 kefk ata2: DUMMY
> Nov 5 13:26:37 kefk scsi1 : ata_piix
> Nov 5 13:26:37 kefk ata1.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48
> NCQ (depth 0/32)
> Nov 5 13:26:37 kefk ata1.00: ata1: dev 0 multi count 16
> Nov 5 13:26:37 kefk ata1.01: ATA-7, max UDMA/133, 586114704 sectors: LBA48
> NCQ (depth 0/32)
> Nov 5 13:26:37 kefk ata1.01: ata1: dev 1 multi count 16
> Nov 5 13:26:37 kefk ata1.00: configured for UDMA/133
> Nov 5 13:26:37 kefk ata1.01: configured for UDMA/133
>
>
> With -mm kernels, I see only the third disk, but attached to a different
> controller (output from rc4 vanilla):
>
> Nov 5 13:26:37 kefk ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 19 (level,
> low) -> IRQ 18
> Nov 5 13:26:37 kefk ata3: SATA max UDMA/100 cmd 0xF8804080 ctl 0xF880408A
> bmdma 0xF8804000 irq 18
> Nov 5 13:26:37 kefk ata4: SATA max UDMA/100 cmd 0xF88040C0 ctl 0xF88040CA
> bmdma 0xF8804008 irq 18
> Nov 5 13:26:37 kefk scsi3 : sata_sil
> Nov 5 13:26:37 kefk ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> Nov 5 13:26:37 kefk ata3.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48
> NCQ (depth 0/32)
> Nov 5 13:26:37 kefk ata3.00: ata3: dev 0 multi count 0
> Nov 5 13:26:37 kefk ata3.00: configured for UDMA/100
> Nov 5 13:26:37 kefk scsi4 : sata_sil
> Nov 5 13:26:37 kefk ata4: SATA link down (SStatus 0 SControl 310)
> Nov 5 13:26:37 kefk scsi 3:0:0:0: Direct-Access ATA Maxtor 6V320F0
> VA11 PQ: 0 ANSI: 5
> Nov 5 13:26:37 kefk SCSI device sdc: 625142448 512-byte hdwr sectors (320073
> MB)
> Nov 5 13:26:37 kefk sdc: Write Protect is off
>

And why doesn't -mm report the same conflict? I assume the .config is the
same?

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-11-06 01:21    [W:0.067 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site