Messages in this thread | | | Date | Mon, 27 Nov 2006 19:15:39 +0100 | From | Martin Korous <> | Subject | sky2, tx timeout |
| |
Hello,
I want report a bug in sky2 driver. Sky2 will shutdown every 5-6 days. Result is reboot or "rmmod sky2 && modprobe sky2" I have changed eth0 for eth1 (sky2 is on intranet now) because there is smaller traffic, but sky2 will shutdown again in 5-6 days. follow some info from logs and about network card
NOTICE: I dont have subscribe LKML, if you want more info from me, answer to my e-mail.
regards Martin Korous
uname -a Linux archie 2.6.18.2 #1 SMP Tue Nov 14 11:07:47 CET 2006 i686 pentium4 i386 GNU/Linux
/var/log/syslog Nov 27 17:25:46 archie kernel: sky2 eth1: tx timeout Nov 27 17:31:11 archie kernel: sky2 eth1: tx timeout Nov 27 17:31:31 archie kernel: sky2 eth1: tx timeout Nov 27 17:34:08 archie kernel: OUTPUT packet died: IN= OUT=eth0 SRC=10.0.0.18 DST=10.0.0.8 LEN=60 TOS=0x10 PREC=0x00 TTL=64 ID=41315 DF PROTO=TCP SPT=43946 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 Nov 27 17:34:09 archie kernel: OUTPUT packet died: IN= OUT=eth0 SRC=10.0.0.18 DST=10.0.0.5 LEN=60 TOS=0x10 PREC=0x00 TTL=64 ID=16666 DF PROTO=TCP SPT=55772 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 Nov 27 17:34:14 archie kernel: OUTPUT packet died: IN= OUT=eth0 SRC=10.0.0.18 DST=10.0.0.8 LEN=60 TOS=0x10 PREC=0x00 TTL=64 ID=41316 DF PROTO=TCP SPT=43946 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0
dmesg (time is around shutdown eth1, perhaps)
sky2 eth1: disabling interface e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex sky2 eth1: enabling interface sky2 eth1: Link is up at 1000 Mbps, full duplex, flow control none NETDEV WATCHDOG: eth1: transmit timed out sky2 eth1: tx timeout sky2 eth1: transmit ring 507 .. 484 report=507 done=507 sky2 hardware hung? flushing NETDEV WATCHDOG: eth1: transmit timed out sky2 eth1: tx timeout sky2 eth1: transmit ring 484 .. 461 report=507 done=507 sky2 status report lost? NETDEV WATCHDOG: eth1: transmit timed out sky2 eth1: tx timeout sky2 eth1: transmit ring 507 .. 484 report=507 done=507 sky2 hardware hung? flushing sky2 eth1: disabling interface OUTPUT packet died: IN= OUT=eth0 SRC=10.0.0.18 DST=10.0.0.8 LEN=60 TOS=0x10 PREC=0x00 TTL=64 ID=41315 DF PROTO=TCP SPT=43946 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 OUTPUT packet died: IN= OUT=eth0 SRC=10.0.0.18 DST=10.0.0.5 LEN=60 TOS=0x10 PREC=0x00 TTL=64 ID=16666 DF PROTO=TCP SPT=55772 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 OUTPUT packet died: IN= OUT=eth0 SRC=10.0.0.18 DST=10.0.0.8 LEN=60 TOS=0x10 PREC=0x00 TTL=64 ID=41316 DF PROTO=TCP SPT=43946 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 ACPI: PCI interrupt for device 0000:02:00.0 disabled PCI: Enabling device 0000:02:00.0 (0140 -> 0143) ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:02:00.0 to 64 sky2 v1.5 addr 0xdedfc000 irq 16 Yukon-EC (0xb6) rev 2 sky2 eth1: addr 00:0e:0c:6a:c3:64 sky2 eth1: enabling interface sky2 eth1: Link is up at 1000 Mbps, full duplex, flow control none
lspci -vvv 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8050 PCI-E ASF Gigabit Ethernet Controller (rev 18) Subsystem: Intel Corporation Unknown device 3466 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at dedfc000 (64-bit, non-prefetchable) [size=16K] Region 2: I/O ports at cf00 [size=256] Expansion ROM at dedc0000 [disabled] [size=128K] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME- Capabilities: [50] Vital Product Data Capabilities: [5c] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [e0] Express Legacy Endpoint IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s unlimited, L1 unlimited Device: AtnBtn- AtnInd- PwrInd- Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 512 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 3 Link: Latency L0s <256ns, L1 unlimited Link: ASPM Disabled RCB 128 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x1
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |