lkml.org 
[lkml]   [2006]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: Initial ramdisk support does not work (for me) on 2.6.17.13
Date
From
In gmane.linux.kernel, you wrote:
> Hi!

Hallo.

> We are building embedded devices based on Linux and we use a ramdisk as
> our root device in order to avoid problems with people switching off the
> unit without a proper shutdown and to save write-cycles on our flash disc.
>
> Using a 2.6.12 kernel it was no problem to boot the system by using this
> kernel parameters:
> load_ramdisk=1 console=tty0 initrd=initrd.gz rw vga=769
> ramdisk_size=32768 root=/dev/ram0
>
> Today I tried to test run a 2.6.17.12 kernel using the same parameters
> but I get this error message:
> VFS: Cannot open root device "ram0" or unknown-block(1,0)
> Please append a correct "root=" boot option

In subject you've wrote "2.6.17.13", but anyway in such cases one must
include full dmesg (boot output) and (sometimes) ".config".

Also, if you are using some kind of embedded hardware, f.e. ARM,
please, use arm-user mailing list for such questions.
____
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-11-16 13:55    [W:0.040 / U:0.244 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site