This message generated a parse failure. Raw output follows here. Please use 'back' to navigate. From devnull@lkml.org Sat Apr 20 02:58:34 2024 Delivery-date: Sat, 11 Nov 2006 09:31:24 +0000 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1947172AbWKKJ3N (ORCPT ); Sat, 11 Nov 2006 04:29:13 -0500 Received: from aa013msr.fastwebnet.it ([85.18.95.73]:30085 "EHLO aa013msr.fastwebnet.it") by vger.kernel.org with ESMTP id S1947166AbWKKJ3K (ORCPT ); Sat, 11 Nov 2006 04:29:10 -0500 Received: from localhost (14.255.97.131) by aa013msr.fastwebnet.it (7.3.105.6) (authenticated as ornati) id 452E074A0136936D; Sat, 11 Nov 2006 10:25:35 +0100 Date: Sat, 11 Nov 2006 10:25:06 +0100 From: Paolo Ornati To: "Rafael J. Wysocki" Cc: Adrian Bunk , LKML Subject: Re: [discuss] 2.6.19-rc5: known regressions (v2) Message-Id: <20061111102506.5f98688c@localhost> In-Reply-To: <200611111008.37986.rjw@sisk.pl> References: <20061111015035.GU4729@stusta.de> <200611111008.37986.rjw@sisk.pl> X-Mailer: Sylpheed-Claws 2.4.0 (GTK+ 2.8.19; x86_64-pc-linux-gnu) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7BIT Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org On Sat, 11 Nov 2006 10:08:37 +0100 "Rafael J. Wysocki" wrote: > > Subject : BUG: scheduling while atomic: events/0/0x00000001/4 > > after resume > > References : http://lkml.org/lkml/2006/11/2/209 > > Submitter : Paolo Ornati > > Status : unknown > > I couldn't find anything in the report that would indicate the problem occured > after a resume. Was it really the case? Ahh, I've written that in another email but I trimmed LKML from CC by mistake ;) Relevant portion of that mail follows... anyway it seems that "-rc5" is _OK_ since I'm running it by 2 days and it survived 9 suspend/resume cycles. ------------------------------------------------------------------ I've reproduced it (with rc4-g4b1c46a3), and I think it is suspend/resume related sice the messages start flooding dmesg just after a resume... I'll see if it is reproducible just doing suspend/resume a couple of times... and if so I'll try with -rc5. dmesg (stripped at the end): [ 0.000000] Linux version 2.6.19-rc4-g4b1c46a3 (paolo@tux) (gcc version 4.1.1 (Gentoo 4.1.1)) #17 PREEMPT Wed Nov 1 18:36:28 CET 2006 [ 0.000000] Command line: root=/dev/sda6 elevator=cfq video=radeonfb:1024x768@60 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001ff30000 (usable) [ 0.000000] BIOS-e820: 000000001ff30000 - 000000001ff40000 (ACPI data) [ 0.000000] BIOS-e820: 000000001ff40000 - 000000001fff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 130864) 1 entries of 256 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000fa850 [ 0.000000] ACPI: RSDT (v001 A M I OEMRSDT 0x06000517 MSFT 0x00000097) @ 0x000000001ff30000 [ 0.000000] ACPI: FADT (v001 A M I OEMFACP 0x06000517 MSFT 0x00000097) @ 0x000000001ff30200 [ 0.000000] ACPI: MADT (v001 A M I OEMAPIC 0x06000517 MSFT 0x00000097) @ 0x000000001ff30390 [ 0.000000] ACPI: OEMB (v001 A M I OEMBIOS 0x06000517 MSFT 0x00000097) @ 0x000000001ff40040 [ 0.000000] ACPI: DSDT (v001 A0058 A0058002 0x00000002 MSFT 0x0100000d) @ 0x0000000000000000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 130864) 1 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 130864 [ 0.000000] On node 0 totalpages: 130767 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1183 pages reserved [ 0.000000] DMA zone: 2760 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 1733 pages used for memmap [ 0.000000] DMA32 zone: 125035 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Nosave address range: 000000000009f000 - 00000000000a0000 [ 0.000000] Nosave address range: 00000000000a0000 - 00000000000e4000 [ 0.000000] Nosave address range: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000) [ 0.000000] Built 1 zonelists. Total pages: 127795 [ 0.000000] Kernel command line: root=/dev/sda6 elevator=cfq video=radeonfb:1024x768@60 [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 2048 (order: 11, 16384 bytes) [ 32.727602] time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. [ 32.727605] time.c: Detected 2202.943 MHz processor. [ 32.730265] Console: colour VGA+ 80x25 [ 32.733073] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 32.733509] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 32.733646] Checking aperture... [ 32.733705] CPU 0: aperture @ f8000000 size 64 MB [ 32.740581] Memory: 507900k/523456k available (2708k kernel code, 14716k reserved, 1343k data, 200k init) [ 32.800438] Calibrating delay using timer specific routine.. 4409.08 BogoMIPS (lpj=2204542) [ 32.800591] Mount-cache hash table entries: 256 [ 32.800771] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 32.800833] CPU: L2 Cache: 512K (64 bytes/line) [ 32.800913] CPU: AMD Athlon(tm) 64 Processor 3200+ stepping 00 [ 32.801063] ACPI: Core revision 20060707 [ 32.814145] Using local APIC timer interrupts. [ 32.859518] result 12516743 [ 32.859573] Detected 12.516 MHz APIC timer. [ 32.860328] testing NMI watchdog ... OK. [ 32.870515] checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd [ 32.873517] Freeing initrd memory: 2000k freed [ 32.875609] NET: Registered protocol family 16 [ 32.875754] ACPI: bus type pci registered [ 32.875818] PCI: Using configuration type 1 [ 32.881215] ACPI: Interpreter enabled [ 32.881276] ACPI: Using IOAPIC for interrupt routing [ 32.882250] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 32.882315] PCI: Probing PCI hardware (bus 00) [ 32.884489] PCI: enabled onboard AC97/MC97 devices [ 32.884765] Boot video device is 0000:01:00.0 [ 32.884843] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 32.896169] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15) [ 32.896831] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15) [ 32.897488] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *7 10 11 14 15) [ 32.898143] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 14 15) [ 32.898809] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 32.899560] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 32.900312] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 32.901052] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 32.901700] Linux Plug and Play Support v0.97 (c) Adam Belay [ 32.901768] pnp: PnP ACPI init [ 32.904855] pnp: PnP ACPI: found 13 devices [ 32.905045] SCSI subsystem initialized [ 32.905158] usbcore: registered new interface driver usbfs [ 32.905247] usbcore: registered new interface driver hub [ 32.905335] usbcore: registered new device driver usb [ 32.905452] PCI: Using ACPI for IRQ routing [ 32.905511] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 32.905592] PCI: Cannot allocate resource region 0 of device 0000:00:00.0 [ 32.905754] agpgart: Detected AGP bridge 0 [ 32.908913] agpgart: AGP aperture is 64M @ 0xf8000000 [ 32.908997] PCI-DMA: Disabling IOMMU. [ 32.909754] PCI: Bridge: 0000:00:01.0 [ 32.909812] IO window: a000-afff [ 32.909871] MEM window: fd100000-fd6fffff [ 32.909931] PREFETCH window: d5000000-f4ffffff [ 32.910006] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 32.910026] NET: Registered protocol family 2 [ 32.918232] IP route cache hash table entries: 4096 (order: 3, 32768 bytes) [ 32.918368] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 32.918516] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 32.918624] TCP: Hash tables configured (established 16384 bind 8192) [ 32.918684] TCP reno registered [ 32.919334] io scheduler noop registered [ 32.919440] io scheduler cfq registered (default) [ 32.920310] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 32.920477] radeonfb: Found Intel x86 BIOS ROM Image [ 32.920539] radeonfb: Retrieved PLL infos from BIOS [ 32.920598] radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=200.00 Mhz, System=166.00 MHz [ 32.920671] radeonfb: PLL min 20000 max 40000 [ 32.921735] radeonfb: Monitor 1 type CRT found [ 32.921793] radeonfb: Monitor 2 type no found [ 32.955438] Console: switching to colour frame buffer device 128x48 [ 32.975175] radeonfb (0000:01:00.0): ATI Radeon Yd [ 32.975352] ACPI: Power Button (FF) [PWRF] [ 32.975477] ACPI: Power Button (CM) [PWRB] [ 32.975586] ACPI: Sleep Button (CM) [SLPB] [ 32.977202] Real Time Clock Driver v1.12ac [ 32.977313] Linux agpgart interface v0.101 (c) Dave Jones [ 32.977457] [drm] Initialized drm 1.0.1 20051102 [ 32.978126] [drm] Initialized radeon 1.25.0 20060524 on minor 0 [ 32.978294] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled [ 32.978587] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 32.978834] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 32.979259] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 32.979511] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 32.979773] Floppy drive(s): fd0 is 1.44M [ 32.994906] FDC 0 is a post-1991 82077 [ 32.996382] RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize [ 32.996766] loop: loaded (max 8 devices) [ 32.996906] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 32.999471] skge 1.9 addr 0xfdc00000 irq 17 chip Yukon-Lite rev 9 [ 33.001981] skge eth0: addr 00:11:d8:1c:a0:7a [ 33.004520] 8139too Fast Ethernet driver 0.9.28 [ 33.007047] ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 33.010258] eth1: RealTek RTL8139 at 0xffffc20000004000, 00:e0:4c:f0:ab:b8, IRQ 19 [ 33.013135] eth1: Identified 8139 chip type 'RTL-8139C' [ 33.013151] Linux video capture interface: v2.00 [ 33.016118] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 33.019236] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 33.022583] VP_IDE: IDE controller at PCI slot 0000:00:0f.1 [ 33.026030] ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 20 [ 33.029676] VP_IDE: chipset revision 6 [ 33.033379] VP_IDE: not 100% native mode: will probe irqs later [ 33.037248] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 [ 33.041286] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio [ 33.045502] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio [ 33.049751] Probing IDE interface ide0... [ 33.841448] hda: HL-DT-ST DVDRAM GSA-4167B, ATAPI CD/DVD-ROM drive [ 34.152000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 34.156490] Probing IDE interface ide1... [ 34.948226] hdc: HL-DT-ST GCE-8400B, ATAPI CD/DVD-ROM drive [ 35.257686] ide1 at 0x170-0x177,0x376 on irq 15 [ 35.264947] hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) [ 35.269964] Uniform CD-ROM driver Revision: 3.20 [ 35.283252] hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, DMA [ 35.289395] libata version 2.00 loaded. [ 35.289419] sata_via 0000:00:0f.0: version 2.0 [ 35.289430] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 20 [ 35.294798] sata_via 0000:00:0f.0: routed to hard irq line 10 [ 35.300148] ata1: SATA max UDMA/133 cmd 0xE800 ctl 0xE402 bmdma 0xD400 irq 20 [ 35.305530] ata2: SATA max UDMA/133 cmd 0xE000 ctl 0xD802 bmdma 0xD408 irq 20 [ 35.310844] scsi0 : sata_via [ 35.515983] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 35.673125] ata1.00: ATA-6, max UDMA/133, 156301488 sectors: LBA48 NCQ (depth 0/32) [ 35.678757] ata1.00: ata1: dev 0 multi count 16 [ 35.686006] ata1.00: configured for UDMA/133 [ 35.691568] scsi1 : sata_via [ 35.897218] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 35.913718] ATA: abnormal status 0x7F on port 0xE007 [ 35.919332] scsi 0:0:0:0: Direct-Access ATA ST380817AS 3.42 PQ: 0 ANSI: 5 [ 35.925134] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) [ 35.930882] sda: Write Protect is off [ 35.936662] sda: Mode Sense: 00 3a 00 00 [ 35.936675] SCSI device sda: drive cache: write back [ 35.942505] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) [ 35.948370] sda: Write Protect is off [ 35.954136] sda: Mode Sense: 00 3a 00 00 [ 35.954148] SCSI device sda: drive cache: write back [ 35.959889] sda: sda1 sda2 < sda5 sda6 sda7 sda8 > [ 36.027032] sd 0:0:0:0: Attached scsi disk sda [ 36.032710] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 36.038359] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21 [ 36.044338] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 36.050131] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 [ 36.055834] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfd900000 [ 36.061409] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 36.067109] usb usb1: configuration #1 chosen from 1 choice [ 36.072686] hub 1-0:1.0: USB hub found [ 36.078141] hub 1-0:1.0: 8 ports detected [ 36.183732] USB Universal Host Controller Interface driver v3.0 [ 36.189136] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 36.194595] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 36.200026] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 36.205457] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000b000 [ 36.211000] usb usb2: configuration #1 chosen from 1 choice [ 36.216430] hub 2-0:1.0: USB hub found [ 36.221776] hub 2-0:1.0: 2 ports detected [ 36.327443] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21 [ 36.332864] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 36.338237] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 [ 36.343600] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000b400 [ 36.348985] usb usb3: configuration #1 chosen from 1 choice [ 36.354262] hub 3-0:1.0: USB hub found [ 36.359430] hub 3-0:1.0: 2 ports detected [ 36.465147] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21 [ 36.470440] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 36.475698] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 [ 36.480965] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000b800 [ 36.486227] usb usb4: configuration #1 chosen from 1 choice [ 36.491386] hub 4-0:1.0: USB hub found [ 36.496528] hub 4-0:1.0: 2 ports detected [ 36.601875] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21 [ 36.607110] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 36.612333] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 [ 36.617549] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000c000 [ 36.622729] usb usb5: configuration #1 chosen from 1 choice [ 36.627812] hub 5-0:1.0: USB hub found [ 36.632845] hub 5-0:1.0: 2 ports detected [ 37.161683] usbcore: registered new interface driver cdc_acm [ 37.166690] drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters [ 37.171947] usbcore: registered new interface driver usblp [ 37.177212] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver [ 37.182561] Initializing USB Mass Storage driver... [ 37.187966] usbcore: registered new interface driver usb-storage [ 37.193343] USB Mass Storage support registered. [ 37.198710] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 37.204404] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 37.209839] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 37.215222] mice: PS/2 mouse device common for all mice [ 37.220524] i2c /dev entries driver [ 37.226206] Advanced Linux Sound Architecture Driver Version 1.0.13 (Sun Oct 22 08:56:16 2006 UTC). [ 37.231946] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22 [ 37.239539] PCI: Setting latency timer of device 0000:00:11.5 to 64 [ 37.251526] input: AT Translated Set 2 keyboard as /class/input/input0 [ 37.751566] codec_read: codec 0 is not valid [0xfe0000] [ 37.764869] codec_read: codec 0 is not valid [0xfe0000] [ 37.778121] codec_read: codec 0 is not valid [0xfe0000] [ 37.791242] codec_read: codec 0 is not valid [0xfe0000] [ 37.808500] ALSA device list: [ 37.813631] #0: VIA 8237 with AD1980 at 0xec00, irq 22 [ 37.818899] oprofile: using NMI interrupt. [ 37.824105] TCP cubic registered [ 37.829169] NET: Registered protocol family 1 [ 37.834229] NET: Registered protocol family 17 [ 37.839196] NET: Registered protocol family 15 [ 37.844134] ACPI: (supports S0 S1 S3 S4 S5) [ 37.961630] input: ImPS/2 Logitech Wheel Mouse as /class/input/input1 [ 38.050012] RAMDISK: ext2 filesystem found at block 0 [ 38.054928] RAMDISK: Loading 2000KiB [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|done. [ 38.066647] VFS: Mounted root (ext2 filesystem). [ 38.129633] kjournald starting. Commit interval 5 seconds [ 38.134550] EXT3-fs: mounted filesystem with ordered data mode. [ 38.139493] VFS: Mounted root (ext3 filesystem) readonly. [ 38.144469] Trying to move old root to /initrd ... /initrd does not exist. Ignored. [ 38.149670] Unmounting old root [ 38.154701] Trying to free ramdisk memory ... okay [ 38.159878] Freeing unused kernel memory: 200k freed [ 38.164962] Write protecting the kernel read-only data: 560k [ 40.454619] warning: process `touch' used the removed sysctl system call [ 40.890041] warning: process `sleep' used the removed sysctl system call [ 40.999232] warning: process `sleep' used the removed sysctl system call [ 41.104730] warning: process `sleep' used the removed sysctl system call [ 41.873966] warning: process `sleep' used the removed sysctl system call [ 43.453372] EXT3 FS on sda6, internal journal [ 43.999154] kjournald starting. Commit interval 5 seconds [ 43.999164] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 43.999323] EXT3 FS on sda8, internal journal [ 43.999328] EXT3-fs: mounted filesystem with ordered data mode. [ 44.117933] Adding 1004016k swap on /dev/sda7. Priority:-1 extents:1 across:1004016k [ 50.175883] skge eth0: enabling interface [ 62.993341] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. [ 62.993361] agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode [ 62.993436] agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode [ 63.288516] [drm] Setting GART location based on new memory map [ 63.288604] [drm] Loading R200 Microcode [ 63.288694] [drm] writeback test succeeded in 1 usecs [ 79.495845] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 81.127324] ip_tables: (C) 2000-2006 Netfilter Core Team [ 81.170715] ip_conntrack version 2.4 (2044 buckets, 16352 max) - 248 bytes per conntrack [ 180.334016] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 306.826671] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. [ 306.826693] agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode [ 306.826768] agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode [ 306.826780] [drm] Loading R200 Microcode [ 340.827814] Stopping tasks: ==========================================================================================================================================| [ 340.828658] Shrinking memory... -\|/-done (51711 pages freed) [ 340.925349] Suspending console(s) [ 341.809883] pnp: Device 00:0b disabled. [ 341.810124] pnp: Device 00:0a disabled. [ 341.810148] radeonfb (0000:01:00.0): suspending for event: 1... [ 341.887207] skge eth0: disabling interface [ 341.899219] pci_set_power_state(): 0000:00:00.0: state=3, current state=5 [ 341.912910] swsusp: Need to copy 63368 pages [ 26.062737] APIC error on CPU0: 00(00) [ 26.062827] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 26.146592] PM: Writing back config space on device 0000:00:0a.0 at offset f (was 1f170100, writing 1f17010a) [ 26.146599] PM: Writing back config space on device 0000:00:0a.0 at offset c (was 0, writing fdb00000) [ 26.146609] PM: Writing back config space on device 0000:00:0a.0 at offset 5 (was 1, writing c801) [ 26.146614] PM: Writing back config space on device 0000:00:0a.0 at offset 4 (was 0, writing fdc00000) [ 26.146619] PM: Writing back config space on device 0000:00:0a.0 at offset 3 (was 0, writing 4010) [ 26.146626] PM: Writing back config space on device 0000:00:0a.0 at offset 1 (was 2b00000, writing 2b00117) [ 26.146658] skge eth0: enabling interface [ 26.160202] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 26.171176] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 26.171218] usb usb2: root hub lost power or was reset [ 26.182150] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21 [ 26.182188] usb usb3: root hub lost power or was reset [ 26.193128] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21 [ 26.193165] usb usb4: root hub lost power or was reset [ 26.204106] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21 [ 26.204143] usb usb5: root hub lost power or was reset [ 26.215084] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21 [ 26.215109] usb usb1: root hub lost power or was reset [ 26.215127] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 26.226082] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22 [ 26.226088] PCI: Setting latency timer of device 0000:00:11.5 to 64 [ 26.229463] radeonfb (0000:01:00.0): resuming from state: 1... [ 26.247263] pnp: Failed to activate device 00:03. [ 26.247391] pnp: Failed to activate device 00:04. [ 26.248318] pnp: Device 00:0a activated. [ 26.249004] pnp: Device 00:0b activated. [ 27.134110] Restarting tasks... done [ 27.565554] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. [ 27.565593] agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode [ 27.565670] agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode [ 27.565682] [drm] Loading R200 Microcode [ 28.443446] ip_conntrack version 2.4 (2044 buckets, 16352 max) - 248 bytes per conntrack [ 752.692523] Stopping tasks: ======================================================================================================================================| [ 752.693363] Shrinking memory... -\|/-\done (58183 pages freed) [ 756.669812] Suspending console(s) [ 757.578446] pnp: Device 00:0b disabled. [ 757.578702] pnp: Device 00:0a disabled. [ 757.578727] radeonfb (0000:01:00.0): suspending for event: 1... [ 757.655322] skge eth0: disabling interface [ 757.695225] swsusp: Need to copy 58533 pages [ 25.139916] APIC error on CPU0: 00(00) [ 25.293551] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 25.377319] PM: Writing back config space on device 0000:00:0a.0 at offset f (was 1f170100, writing 1f17010a) [ 25.377326] PM: Writing back config space on device 0000:00:0a.0 at offset c (was 0, writing fdb00000) [ 25.377338] PM: Writing back config space on device 0000:00:0a.0 at offset 5 (was 1, writing c801) [ 25.377343] PM: Writing back config space on device 0000:00:0a.0 at offset 4 (was 0, writing fdc00000) [ 25.377348] PM: Writing back config space on device 0000:00:0a.0 at offset 3 (was 0, writing 4010) [ 25.377353] PM: Writing back config space on device 0000:00:0a.0 at offset 1 (was 2b00000, writing 2b00117) [ 25.377384] skge eth0: enabling interface [ 25.382084] BUG: scheduling while atomic: events/0/0x00000001/4 [ 25.382086] [ 25.382087] Call Trace: [ 25.382097] [] __sched_text_start+0x5b/0x4cc [ 25.382102] [] list_add+0xc/0xe [ 25.382107] [] worker_thread+0x0/0x11b [ 25.382110] [] worker_thread+0xb5/0x11b [ 25.382115] [] default_wake_function+0x0/0xf [ 25.382119] [] worker_thread+0x0/0x11b [ 25.382124] [] kthread+0xce/0x101 [ 25.382128] [] schedule_tail+0x30/0xa2 [ 25.382132] [] child_rip+0xa/0x12 [ 25.382137] [] kthread+0x0/0x101 [ 25.382140] [] child_rip+0x0/0x12 [ 25.382141] [ 25.387073] BUG: scheduling while atomic: events/0/0x00000001/4 [ 25.387074] [ 25.387075] Call Trace: [ 25.387078] [] __sched_text_start+0x5b/0x4cc [ 25.387081] [] list_add+0xc/0xe [ 25.387085] [] worker_thread+0x0/0x11b [ 25.387088] [] worker_thread+0xb5/0x11b [ 25.387092] [] default_wake_function+0x0/0xf [ 25.387096] [] worker_thread+0x0/0x11b [ 25.387099] [] kthread+0xce/0x101 [ 25.387103] [] schedule_tail+0x30/0xa2 [ 25.387106] [] child_rip+0xa/0x12 [ 25.387111] [] kthread+0x0/0x101 [ 25.387114] [] child_rip+0x0/0x12 [ 25.387115] [ 25.391072] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 25.392063] BUG: scheduling while atomic: events/0/0x00000001/4 [ 25.392065] [ 25.392065] Call Trace: [ 25.392068] [] __sched_text_start+0x5b/0x4cc [ 25.392072] [] list_add+0xc/0xe [ 25.392075] [] worker_thread+0x0/0x11b [ 25.392079] [] worker_thread+0xb5/0x11b [ 25.392082] [] default_wake_function+0x0/0xf [ 25.392086] [] worker_thread+0x0/0x11b [ 25.392090] [] kthread+0xce/0x101 [ 25.392093] [] schedule_tail+0x30/0xa2 [ 25.392097] [] child_rip+0xa/0x12 [ 25.392101] [] kthread+0x0/0x101 [ 25.392104] [] child_rip+0x0/0x12 [ 25.392106] [ 25.402046] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 25.402095] usb usb2: root hub lost power or was reset [ 25.413022] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21 [ 25.413067] usb usb3: root hub lost power or was reset [ 25.423998] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21 [ 25.424043] usb usb4: root hub lost power or was reset [ 25.434977] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21 [ 25.435020] usb usb5: root hub lost power or was reset [ 25.445955] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21 [ 25.445987] usb usb1: root hub lost power or was reset [ 25.446006] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 25.456957] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22 [ 25.456963] PCI: Setting latency timer of device 0000:00:11.5 to 64 [ 25.460339] radeonfb (0000:01:00.0): resuming from state: 1... [ 25.478130] pnp: Failed to activate device 00:03. [ 25.478258] pnp: Failed to activate device 00:04. [ 25.479252] pnp: Device 00:0a activated. [ 25.479961] pnp: Device 00:0b activated. [ 26.365424] Restarting tasks... done [ 26.441032] BUG: sleeping function called from invalid context at include/asm/semaphore.h:105 [ 26.441035] in_atomic():1, irqs_disabled():0 [ 26.441037] [ 26.441038] Call Trace: [ 26.441046] [] thread_return+0x0/0xf9 [ 26.441054] [] __might_sleep+0xb2/0xb4 [ 26.441058] [] acquire_console_sem+0x66/0x90 [ 26.441064] [] console_callback+0xe/0xde [ 26.441068] [] run_workqueue+0xb6/0x126 [ 26.441072] [] worker_thread+0x0/0x11b [ 26.441075] [] worker_thread+0xe6/0x11b [ 26.441079] [] default_wake_function+0x0/0xf [ 26.441083] [] worker_thread+0x0/0x11b [ 26.441088] [] kthread+0xce/0x101 [ 26.441112] [] schedule_tail+0x30/0xa2 [ 26.441117] [] child_rip+0xa/0x12 [ 26.441121] [] kthread+0x0/0x101 [ 26.441125] [] child_rip+0x0/0x12 [ 26.441126] [ 26.441160] BUG: scheduling while atomic: events/0/0x00000001/4 [ 26.441162] [ 26.441162] Call Trace: [ 26.441166] [] __sched_text_start+0x5b/0x4cc [ 26.441171] [] list_add+0xc/0xe [ 26.441174] [] worker_thread+0x0/0x11b [ 26.441178] [] worker_thread+0xb5/0x11b [ 26.441181] [] default_wake_function+0x0/0xf [ 26.441185] [] worker_thread+0x0/0x11b [ 26.441189] [] kthread+0xce/0x101 [ 26.441193] [] schedule_tail+0x30/0xa2 [ 26.441196] [] child_rip+0xa/0x12 [ 26.441201] [] kthread+0x0/0x101 [ 26.441204] [] child_rip+0x0/0x12 [ 26.441206] [ 27.289287] BUG: scheduling while atomic: events/0/0x00000001/4 [ 27.289292] [ 27.289293] Call Trace: [ 27.289305] [] __sched_text_start+0x5b/0x4cc [ 27.289310] [] list_add+0xc/0xe [ 27.289315] [] worker_thread+0x0/0x11b [ 27.289319] [] worker_thread+0xb5/0x11b [ 27.289324] [] default_wake_function+0x0/0xf [ 27.289328] [] worker_thread+0x0/0x11b [ 27.289333] [] kthread+0xce/0x101 [ 27.289337] [] schedule_tail+0x30/0xa2 [ 27.289342] [] child_rip+0xa/0x12 [ 27.289346] [] kthread+0x0/0x101 [ 27.289349] [] child_rip+0x0/0x12 [ 27.289351] [ 27.427130] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. [ 27.427152] agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode [ 27.427228] agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode [ 27.427240] [drm] Loading R200 Microcode [ 29.285334] BUG: scheduling while atomic: events/0/0x00000001/4 [ 29.285339] [ 29.285340] Call Trace: [ 29.285352] [] __sched_text_start+0x5b/0x4cc [ 29.285358] [] list_add+0xc/0xe [ 29.285363] [] worker_thread+0x0/0x11b [ 29.285366] [] worker_thread+0xb5/0x11b [ 29.285372] [] default_wake_function+0x0/0xf [ 29.285376] [] worker_thread+0x0/0x11b [ 29.285380] [] kthread+0xce/0x101 [ 29.285384] [] schedule_tail+0x30/0xa2 [ 29.285389] [] child_rip+0xa/0x12 [ 29.285394] [] kthread+0x0/0x101 [ 29.285397] [] child_rip+0x0/0x12 [ 29.285399] [ 31.281290] BUG: scheduling while atomic: events/0/0x00000001/4 [ 31.281295] [ 31.281296] Call Trace: [ 31.281309] [] __sched_text_start+0x5b/0x4cc [ 31.281314] [] list_add+0xc/0xe [ 31.281319] [] worker_thread+0x0/0x11b [ 31.281323] [] worker_thread+0xb5/0x11b [ 31.281329] [] default_wake_function+0x0/0xf [ 31.281333] [] worker_thread+0x0/0x11b [ 31.281338] [] kthread+0xce/0x101 [ 31.281342] [] schedule_tail+0x30/0xa2 [ 31.281346] [] child_rip+0xa/0x12 [ 31.281351] [] kthread+0x0/0x101 [ 31.281354] [] child_rip+0x0/0x12 [ 31.281356] [ 32.949597] ip_conntrack version 2.4 (2044 buckets, 16352 max) - 248 bytes per conntrack [ 33.277294] BUG: scheduling while atomic: events/0/0x00000001/4 [ 33.277298] [ 33.277299] Call Trace: [ 33.277311] [] __sched_text_start+0x5b/0x4cc [ 33.277317] [] list_add+0xc/0xe [ 33.277322] [] worker_thread+0x0/0x11b [ 33.277325] [] worker_thread+0xb5/0x11b [ 33.277331] [] default_wake_function+0x0/0xf [ 33.277335] [] worker_thread+0x0/0x11b [ 33.277340] [] kthread+0xce/0x101 [ 33.277344] [] schedule_tail+0x30/0xa2 [ 33.277348] [] child_rip+0xa/0x12 [ 33.277353] [] kthread+0x0/0x101 [ 33.277357] [] child_rip+0x0/0x12 [ 33.277359] [ 35.273273] BUG: scheduling while atomic: events/0/0x00000001/4 [ 35.273278] [ 35.273279] Call Trace: [ 35.273291] [] __sched_text_start+0x5b/0x4cc [ 35.273296] [] list_add+0xc/0xe [ 35.273302] [] worker_thread+0x0/0x11b [ 35.273305] [] worker_thread+0xb5/0x11b [ 35.273311] [] default_wake_function+0x0/0xf [ 35.273315] [] worker_thread+0x0/0x11b [ 35.273320] [] kthread+0xce/0x101 [ 35.273324] [] schedule_tail+0x30/0xa2 [ 35.273329] [] child_rip+0xa/0x12 [ 35.273334] [] kthread+0x0/0x101 [ 35.273337] [] child_rip+0x0/0x12 [ 35.273339] [...] ------------------------------------------------------------------ -- Paolo Ornati Linux 2.6.19-rc5 on x86_64 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/