![]() | ||||||||||
Messages in this thread |
Hi! All I wanted was a cheap IDE controller to attach a spool disk for my backups. What I got was a RAID controller with the it8212 chip. Ok, I thought, just ignore that. The module was loaded and the disk mounted without a hitch. But as soon as the backup started writing to the disk, CPU usage went up to about 100%, a lot (rough estimage 50%) of that "system". Strange enough in itself, but it did not only affect the one process actually accessing that disk, but apparently all processes doing I/O (or perhaps doing I/O to any IDE device?). Most notably one ogg123 (feeding on hold music to our pbx), which usually uses about 5% CPU, went up to 25%... Even if the driver is strange, what takes up the "user" CPU cycles? Looking through the logs I notices that it821x was in "smart" mode, so I restarted the system with "noraid=1" to get into "pass through". Now everything is back to normal. A large dd did about 40MB/s without disturbing other processes. Wasn't smart mode the one supposed to be the one reducing CPU load? BTW, my hardware setup (lspci): 00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev c1) 00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1) 00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1) 00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1) 00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1) 00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1) 00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4) 00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2) 00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) 00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) 00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) 00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet Controller (rev a1) 00:05.0 Multimedia audio controller: nVidia Corporation nForce Audio Processing Unit (rev a2) 00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio Controler (MCP) (rev a1) 00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3) 00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2) 00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1) 01:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8129 (rev 10) 01:07.0 SCSI storage controller: Adaptec AHA-2940U/UW/D / AIC-7881U (rev 01) 01:08.0 Multimedia controller: Philips Semiconductors TriMedia TM-1300 (rev 82) 01:09.0 RAID bus controller: Silicon Image, Inc. SiI 3112 [SATALink/SATARaid] Serial ATA Controller (rev 02) 01:0a.0 RAID bus controller: <pci_lookup_name: buffer too small> (rev 13) 01:0b.0 Mass storage controller: Silicon Image, Inc. SiI 3114 [SATALink/SATARaid] Serial ATA Controller (rev 02) 02:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev b2) The one with a name to long for the buffer is the it8212. Root partition is on a raid 1 spanning hda and hdc, the spool disk is hde. MfG, Ulrich -- Heinz Ulrich Stille / Tel.: +49-541-9400473 / Fax: +49-541-9400450 design_d gmbh / Wilhelmstr. 16 / 49076 Osnabrück / www.design-d.de - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/ | |||||||||
| Last update: 2006-10-07 07:29 [from the cache] ©2003-2008 | ||||||||||