lkml.org 
[lkml]   [2006]   [Oct]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: 2.6.18-mm2 boot failure on x86-64
From
On (05/10/06 21:23), Steve Fox didst pronounce:
> On Thu, 2006-10-05 at 22:50 +0200, Andi Kleen wrote:
> > On Thursday 05 October 2006 22:42, Steve Fox wrote:
> > > On Thu, 2006-10-05 at 21:05 +0200, Andi Kleen wrote:
> > >
> > > > Can you please try it again with this patch to narrow it down further?
> > >
> > > Unfortunately this is as far as it got before it hung.
> >
> > Boot with earlyprintk=serial,ttyS0,57600
> > (or change the panic in the checkfunction back to a printk)
>
> root (hd0,0)
> Filesystem type is reiserfs, partition type 0x83
> kernel /boot/vmlinuz-autobench root=/dev/sda1 vga=791 ip=9.47.67.239:9.47.67.5
> 0:9.47.67.1:255.255.255.0 resume=/dev/sdb1 showopts earlyprintk=serial,ttyS0,57
> 600 console=tty0 console=ttyS0,57600 autobench_args: root=/dev/sda1 ABAT:116010
> 0417
> [Linux-bzImage, setup=0x1400, size=0x1dd855]
> initrd /boot/initrd-autobench.img
> [Linux-initrd @ 0x37cec000, 0x303f80 bytes]
>
> Linux version 2.6.18-git22 (root@elm3b239) (gcc version 4.1.0 (SUSE Linux)) #2 SMP Thu Oct 5 19:05:36 PDT 2006
> Command line: root=/dev/sda1 vga=791 ip=9.47.67.239:9.47.67.50:9.47.67.1:255.255.255.0 resume=/dev/sdb1 showopts earlyprintk=serial,ttyS0,57600 console=tty0 console=ttyS0,57600 autobench_args: root=/dev/sda1 ABAT:1160100417
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009ac00 (usable)
> BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000bff764c0 (usable)
> BIOS-e820: 00000000bff764c0 - 00000000bff98880 (ACPI data)
> BIOS-e820: 00000000bff98880 - 00000000c0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000c00000000 (usable)

I continued what Steve was doing this morning to see could this be
pinned down. After placing 'CHECK;' in a few places as suggested by
Andi's check, the problem code was identified as that following in
mm/bootmem.c#init_bootmem_core()

mapsize = get_mapsize(bdata);
memset(bdata->node_bootmem_map, 0xff, mapsize);

That explains the value in the array at least. A few more printfs around
this point printed out the following in the boot log

init_bootmem_core(0, 1909, 0, 12582912)
init_bootmem_core: Calling memset(0xFFFF810000775000, 1572864)
AAGH: afinfo corrupted at mm/bootmem.c:121
where;

1909 == mapstart
0 == start
12582912 == end
1572864 == mapsize

mapstart, start and end being the parameters being passed to
init_bootmem_core(). This means we are calling memset for the physical
range 0x775000 -> 0x8F5000 which is in a usable range according to the
BIOS-e820 map it appears.

However with 2.6.18-git22, a backout of the patch
x86_64-mm-re-positioning-the-bss-segment.patch from 2.6.18-mm2 allowed the
machine to boot. As this patch moves the BSS past the end of the init section,
it seems that an unintentional side-effect of the patch that BSS ends up in
a place that init_bootmem clobbers it.

> end_pfn_map = 12582912
> kernel direct mapping tables up to c00000000 @ 8000-39000
> DMI 2.3 present.
> afinfo corrupted at arch/x86_64/kernel/setup.c:462
> afinfo corrupted at arch/x86_64/kernel/setup.c:467
> afinfo corrupted at arch/x86_64/kernel/setup.c:472
> afinfo corrupted at arch/x86_64/kernel/setup.c:483
> afinfo corrupted at arch/x86_64/kernel/setup.c:496
> afinfo corrupted at arch/x86_64/kernel/setup.c:504
> afinfo corrupted at arch/x86_64/kernel/setup.c:510
> afinfo corrupted at arch/x86_64/kernel/setup.c:529
> afinfo corrupted at arch/x86_64/kernel/setup.c:537
> Zone PFN ranges:
> DMA 0 -> 4096
> DMA32 4096 -> 1048576
> Normal 1048576 -> 12582912
> early_node_map[3] active PFN ranges
> 0: 0 -> 154
> 0: 256 -> 786294
> 0: 1048576 -> 12582912
> afinfo corrupted at arch/x86_64/kernel/setup.c:540
> afinfo corrupted at arch/x86_64/kernel/setup.c:545
> ACPI: PM-Timer IO Port: 0x9c
> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> Processor #0 (Bootup-CPU)
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> Processor #1
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled)
> Processor #6
> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
> Processor #7
> ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled)
> Processor #16
> ACPI: LAPIC (acpi_id[0x05] lapic_id[0x11] enabled)
> Processor #17
> ACPI: LAPIC (acpi_id[0x06] lapic_id[0x16] enabled)
> Processor #22
> ACPI: LAPIC (acpi_id[0x07] lapic_id[0x17] enabled)
> Processor #23
> ACPI: LAPIC (acpi_id[0x10] lapic_id[0x20] enabled)
> Processor #32
> ACPI: LAPIC (acpi_id[0x11] lapic_id[0x21] enabled)
> Processor #33
> ACPI: LAPIC (acpi_id[0x12] lapic_id[0x26] enabled)
> Processor #38
> ACPI: LAPIC (acpi_id[0x13] lapic_id[0x27] enabled)
> Processor #39
> ACPI: LAPIC (acpi_id[0x14] lapic_id[0x30] enabled)
> Processor #48
> ACPI: LAPIC (acpi_id[0x15] lapic_id[0x31] enabled)
> Processor #49
> ACPI: LAPIC (acpi_id[0x16] lapic_id[0x36] enabled)
> Processor #54
> ACPI: LAPIC (acpi_id[0x17] lapic_id[0x37] enabled)
> Processor #55
> ACPI: LAPIC (acpi_id[0x20] lapic_id[0x40] enabled)
> Processor #64
> WARNING: NR_CPUS limit of 16 reached. Processor ignored.
> ACPI: LAPIC (acpi_id[0x21] lapic_id[0x41] enabled)
> Processor #65
> WARNING: NR_CPUS limit of 16 reached. Processor ignored.
> ACPI: LAPIC (acpi_id[0x22] lapic_id[0x46] enabled)
> Processor #70
> WARNING: NR_CPUS limit of 16 reached. Processor ignored.
> ACPI: LAPIC (acpi_id[0x23] lapic_id[0x47] enabled)
> Processor #71
> WARNING: NR_CPUS limit of 16 reached. Processor ignored.
> ACPI: LAPIC (acpi_id[0x24] lapic_id[0x50] enabled)
> Processor #80
> WARNING: NR_CPUS limit of 16 reached. Processor ignored.
> ACPI: LAPIC (acpi_id[0x25] lapic_id[0x51] enabled)
> Processor #81
> WARNING: NR_CPUS limit of 16 reached. Processor ignored.
> ACPI: LAPIC (acpi_id[0x26] lapic_id[0x56] enabled)
> Processor #86
> WARNING: NR_CPUS limit of 16 reached. Processor ignored.
> ACPI: LAPIC (acpi_id[0x27] lapic_id[0x57] enabled)
> Processor #87
> WARNING: NR_CPUS limit of 16 reached. Processor ignored.
> ACPI: LAPIC (acpi_id[0x30] lapic_id[0x60] enabled)
> Processor #96
> WARNING: NR_CPUS limit of 16 reached. Processor ignored.
> ACPI: LAPIC (acpi_id[0x31] lapic_id[0x61] enabled)
> Processor #97
> WARNING: NR_CPUS limit of 16 reached. Processor ignored.
> ACPI: LAPIC (acpi_id[0x32] lapic_id[0x66] enabled)
> Processor #102
> WARNING: NR_CPUS limit of 16 reached. Processor ignored.
> ACPI: LAPIC (acpi_id[0x33] lapic_id[0x67] enabled)
> Processor #103
> WARNING: NR_CPUS limit of 16 reached. Processor ignored.
> ACPI: LAPIC (acpi_id[0x34] lapic_id[0x70] enabled)
> Processor #112
> WARNING: NR_CPUS limit of 16 reached. Processor ignored.
> ACPI: LAPIC (acpi_id[0x35] lapic_id[0x71] enabled)
> Processor #113
> WARNING: NR_CPUS limit of 16 reached. Processor ignored.
> ACPI: LAPIC (acpi_id[0x36] lapic_id[0x76] enabled)
> Processor #118
> WARNING: NR_CPUS limit of 16 reached. Processor ignored.
> ACPI: LAPIC (acpi_id[0x37] lapic_id[0x77] enabled)
> Processor #119
> WARNING: NR_CPUS limit of 16 reached. Processor ignored.
> ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x10] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x11] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x12] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x13] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x14] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x15] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x16] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x17] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x20] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x21] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x22] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x23] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x24] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x25] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x26] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x27] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x30] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x31] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x32] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x33] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x34] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x35] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x36] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x37] dfl dfl lint[0x1])
> ACPI: IOAPIC (id[0x0f] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 15, address 0xfec00000, GSI 0-35
> ACPI: IOAPIC (id[0x0e] address[0xfec01000] gsi_base[36])
> IOAPIC[1]: apic_id 14, address 0xfec01000, GSI 36-71
> ACPI: IOAPIC (id[0x0d] address[0xfec02000] gsi_base[72])
> IOAPIC[2]: apic_id 13, address 0xfec02000, GSI 72-107
> ACPI: IOAPIC (id[0x0c] address[0xfec03000] gsi_base[108])
> IOAPIC[3]: apic_id 12, address 0xfec03000, GSI 108-143
> ACPI: IOAPIC (id[0x0b] address[0xfec04000] gsi_base[144])
> IOAPIC[4]: apic_id 11, address 0xfec04000, GSI 144-179
> ACPI: IOAPIC (id[0x0a] address[0xfec05000] gsi_base[180])
> IOAPIC[5]: apic_id 10, address 0xfec05000, GSI 180-215
> ACPI: IOAPIC (id[0x09] address[0xfec06000] gsi_base[216])
> IOAPIC[6]: apic_id 9, address 0xfec06000, GSI 216-251
> ACPI: IOAPIC (id[0x08] address[0xfec07000] gsi_base[252])
> IOAPIC[7]: apic_id 8, address 0xfec07000, GSI 252-287
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 8 global_irq 8 low edge)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 low edge)
> Setting APIC routing to clustered
> ACPI: HPET id: 0x10142201 base: 0xfde84000
> afinfo corrupted at arch/x86_64/kernel/setup.c:559
> afinfo corrupted at arch/x86_64/kernel/setup.c:562
> Using ACPI (MADT) for SMP configuration information
> afinfo corrupted at arch/x86_64/kernel/setup.c:569
> afinfo corrupted at arch/x86_64/kernel/setup.c:572
> afinfo corrupted at arch/x86_64/kernel/setup.c:579
> afinfo corrupted at arch/x86_64/kernel/setup.c:582
> Nosave address range: 000000000009a000 - 000000000009b000
> Nosave address range: 000000000009b000 - 00000000000a0000
> Nosave address range: 00000000000a0000 - 00000000000e0000
> Nosave address range: 00000000000e0000 - 0000000000100000
> Nosave address range: 00000000bff76000 - 00000000bff77000
> Nosave address range: 00000000bff77000 - 00000000bff98000
> Nosave address range: 00000000bff98000 - 00000000bff99000
> Nosave address range: 00000000bff99000 - 00000000c0000000
> Nosave address range: 00000000c0000000 - 00000000fec00000
> Nosave address range: 00000000fec00000 - 0000000100000000
> afinfo corrupted at arch/x86_64/kernel/setup.c:585
> afinfo corrupted at arch/x86_64/kernel/setup.c:588
> afinfo corrupted at arch/x86_64/kernel/setup.c:596
> Allocating PCI resources starting at c4000000 (gap: c0000000:3ec00000)
> afinfo corrupted at arch/x86_64/kernel/setup.c:599
> afinfo corrupted at init/main.c:512
> SMP: Allowing 16 CPUs, 0 hotplug CPUs
> PERCPU: Allocating 33920 bytes of per cpu data
> afinfo corrupted at init/main.c:527
> Built 1 zonelists. Total pages: 12147064
> Kernel command line: root=/dev/sda1 vga=791 ip=9.47.67.239:9.47.67.50:9.47.67.1:255.255.255.0 resume=/dev/sdb1 showopts earlyprintk=serial,ttyS0,57600 console=tty0 console=ttyS0,57600 autobench_args: root=/dev/sda1 ABAT:1160100417
> afinfo corrupted at init/main.c:536
> Initializing CPU#0
> PID hash table entries: 4096 (order: 12, 32768 bytes)
> afinfo corrupted at init/main.c:545
> afinfo corrupted at init/main.c:548
> disabling early console
> Linux version 2.6.18-git22 (root@elm3b239) (gcc version 4.1.0 (SUSE Linux)) #2 SMP Thu Oct 5 19:05:36 PDT 2006
> Command line: root=/dev/sda1 vga=791 ip=9.47.67.239:9.47.67.50:9.47.67.1:255.255.255.0 resume=/dev/sdb1 showopts earlyprintk=serial,ttyS0,57600 console=tty0 console=ttyS0,57600 autobench_args: root=/dev/sda1 ABAT:1160100417
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009ac00 (usable)
> BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000bff764c0 (usable)
> BIOS-e820: 00000000bff764c0 - 00000000bff98880 (ACPI data)
> BIOS-e820: 00000000bff98880 - 00000000c0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000c00000000 (usable)
> end_pfn_map = 12582912
> DMI 2.3 present.
> afinfo corrupted at arch/x86_64/kernel/setup.c:462
> afinfo corrupted at arch/x86_64/kernel/setup.c:467
> afinfo corrupted at arch/x86_64/kernel/setup.c:472
> afinfo corrupted at arch/x86_64/kernel/setup.c:483
> afinfo corrupted at arch/x86_64/kernel/setup.c:496
> afinfo corrupted at arch/x86_64/kernel/setup.c:504
> afinfo corrupted at arch/x86_64/kernel/setup.c:510
> afinfo corrupted at arch/x86_64/kernel/setup.c:529
> afinfo corrupted at arch/x86_64/kernel/setup.c:537
> Zone PFN ranges:
> DMA 0 -> 4096
> DMA32 4096 -> 1048576
> Normal 1048576 -> 12582912
> early_node_map[3] active PFN ranges
> 0: 0 -> 154
> 0: 256 -> 786294
> 0: 1048576 -> 12582912
> afinfo corrupted at arch/x86_64/kernel/setup.c:540
> afinfo corrupted at arch/x86_64/kernel/setup.c:545
> ACPI: PM-Timer IO Port: 0x9c
> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> Processor #0 (Bootup-CPU)
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> Processor #1
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled)
> Processor #6
> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
> Processor #7
> ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled)
> Processor #16
> ACPI: LAPIC (acpi_id[0x05] lapic_id[0x11] enabled)
> Processor #17
> ACPI: LAPIC (acpi_id[0x06] lapic_id[0x16] enabled)
> Processor #22
> ACPI: LAPIC (acpi_id[0x07] lapic_id[0x17] enabled)
> Processor #23
> ACPI: LAPIC (acpi_id[0x10] lapic_id[0x20] enabled)
> Processor #32
> ACPI: LAPIC (acpi_id[0x11] lapic_id[0x21] enabled)
> Processor #33
> ACPI: LAPIC (acpi_id[0x12] lapic_id[0x26] enabled)
> Processor #38
> ACPI: LAPIC (acpi_id[0x13] lapic_id[0x27] enabled)
> Processor #39
> ACPI: LAPIC (acpi_id[0x14] lapic_id[0x30] enabled)
> Processor #48
> ACPI: LAPIC (acpi_id[0x15] lapic_id[0x31] enabled)
> Processor #49
> ACPI: LAPIC (acpi_id[0x16] lapic_id[0x36] enabled)
> Processor #54
> ACPI: LAPIC (acpi_id[0x17] lapic_id[0x37] enabled)
> Processor #55
> ACPI: LAPIC (acpi_id[0x20] lapic_id[0x40] enabled)
> Processor #64
> WARNING: NR_CPUS limit of 16 reached. Processor ignored.
> ACPI: LAPIC (acpi_id[0x21] lapic_id[0x41] enabled)
> Processor #65
> WARNING: NR_CPUS limit of 16 reached. Processor ignored.
> ACPI: LAPIC (acpi_id[0x22] lapic_id[0x46] enabled)
> Processor #70
> WARNING: NR_CPUS limit of 16 reached. Processor ignored.
> ACPI: LAPIC (acpi_id[0x23] lapic_id[0x47] enabled)
> Processor #71
> WARNING: NR_CPUS limit of 16 reached. Processor ignored.
> ACPI: LAPIC (acpi_id[0x24] lapic_id[0x50] enabled)
> Processor #80
> WARNING: NR_CPUS limit of 16 reached. Processor ignored.
> ACPI: LAPIC (acpi_id[0x25] lapic_id[0x51] enabled)
> Processor #81
> WARNING: NR_CPUS limit of 16 reached. Processor ignored.
> ACPI: LAPIC (acpi_id[0x26] lapic_id[0x56] enabled)
> Processor #86
> WARNING: NR_CPUS limit of 16 reached. Processor ignored.
> ACPI: LAPIC (acpi_id[0x27] lapic_id[0x57] enabled)
> Processor #87
> WARNING: NR_CPUS limit of 16 reached. Processor ignored.
> ACPI: LAPIC (acpi_id[0x30] lapic_id[0x60] enabled)
> Processor #96
> WARNING: NR_CPUS limit of 16 reached. Processor ignored.
> ACPI: LAPIC (acpi_id[0x31] lapic_id[0x61] enabled)
> Processor #97
> WARNING: NR_CPUS limit of 16 reached. Processor ignored.
> ACPI: LAPIC (acpi_id[0x32] lapic_id[0x66] enabled)
> Processor #102
> WARNING: NR_CPUS limit of 16 reached. Processor ignored.
> ACPI: LAPIC (acpi_id[0x33] lapic_id[0x67] enabled)
> Processor #103
> WARNING: NR_CPUS limit of 16 reached. Processor ignored.
> ACPI: LAPIC (acpi_id[0x34] lapic_id[0x70] enabled)
> Processor #112
> WARNING: NR_CPUS limit of 16 reached. Processor ignored.
> ACPI: LAPIC (acpi_id[0x35] lapic_id[0x71] enabled)
> Processor #113
> WARNING: NR_CPUS limit of 16 reached. Processor ignored.
> ACPI: LAPIC (acpi_id[0x36] lapic_id[0x76] enabled)
> Processor #118
> WARNING: NR_CPUS limit of 16 reached. Processor ignored.
> ACPI: LAPIC (acpi_id[0x37] lapic_id[0x77] enabled)
> Processor #119
> WARNING: NR_CPUS limit of 16 reached. Processor ignored.
> ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x10] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x11] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x12] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x13] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x14] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x15] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x16] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x17] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x20] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x21] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x22] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x23] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x24] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x25] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x26] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x27] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x30] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x31] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x32] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x33] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x34] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x35] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x36] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x37] dfl dfl lint[0x1])
> ACPI: IOAPIC (id[0x0f] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 15, address 0xfec00000, GSI 0-35
> ACPI: IOAPIC (id[0x0e] address[0xfec01000] gsi_base[36])
> IOAPIC[1]: apic_id 14, address 0xfec01000, GSI 36-71
> ACPI: IOAPIC (id[0x0d] address[0xfec02000] gsi_base[72])
> IOAPIC[2]: apic_id 13, address 0xfec02000, GSI 72-107
> ACPI: IOAPIC (id[0x0c] address[0xfec03000] gsi_base[108])
> IOAPIC[3]: apic_id 12, address 0xfec03000, GSI 108-143
> ACPI: IOAPIC (id[0x0b] address[0xfec04000] gsi_base[144])
> IOAPIC[4]: apic_id 11, address 0xfec04000, GSI 144-179
> ACPI: IOAPIC (id[0x0a] address[0xfec05000] gsi_base[180])
> IOAPIC[5]: apic_id 10, address 0xfec05000, GSI 180-215
> ACPI: IOAPIC (id[0x09] address[0xfec06000] gsi_base[216])
> IOAPIC[6]: apic_id 9, address 0xfec06000, GSI 216-251
> ACPI: IOAPIC (id[0x08] address[0xfec07000] gsi_base[252])
> IOAPIC[7]: apic_id 8, address 0xfec07000, GSI 252-287
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 8 global_irq 8 low edge)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 low edge)
> Setting APIC routing to clustered
> ACPI: HPET id: 0x10142201 base: 0xfde84000
> afinfo corrupted at arch/x86_64/kernel/setup.c:559
> afinfo corrupted at arch/x86_64/kernel/setup.c:562
> Using ACPI (MADT) for SMP configuration information
> afinfo corrupted at arch/x86_64/kernel/setup.c:569
> afinfo corrupted at arch/x86_64/kernel/setup.c:572
> afinfo corrupted at arch/x86_64/kernel/setup.c:579
> afinfo corrupted at arch/x86_64/kernel/setup.c:582
> Nosave address range: 000000000009a000 - 000000000009b000
> Nosave address range: 000000000009b000 - 00000000000a0000
> Nosave address range: 00000000000a0000 - 00000000000e0000
> Nosave address range: 00000000000e0000 - 0000000000100000
> Nosave address range: 00000000bff76000 - 00000000bff77000
> Nosave address range: 00000000bff77000 - 00000000bff98000
> Nosave address range: 00000000bff98000 - 00000000bff99000
> Nosave address range: 00000000bff99000 - 00000000c0000000
> Nosave address range: 00000000c0000000 - 00000000fec00000
> Nosave address range: 00000000fec00000 - 0000000100000000
> afinfo corrupted at arch/x86_64/kernel/setup.c:585
> afinfo corrupted at arch/x86_64/kernel/setup.c:588
> afinfo corrupted at arch/x86_64/kernel/setup.c:596
> Allocating PCI resources starting at c4000000 (gap: c0000000:3ec00000)
> afinfo corrupted at arch/x86_64/kernel/setup.c:599
> afinfo corrupted at init/main.c:512
> SMP: Allowing 16 CPUs, 0 hotplug CPUs
> PERCPU: Allocating 33920 bytes of per cpu data
> afinfo corrupted at init/main.c:527
> Built 1 zonelists. Total pages: 12147064
> Kernel command line: root=/dev/sda1 vga=791 ip=9.47.67.239:9.47.67.50:9.47.67.1:255.255.255.0 resume=/dev/sdb1 showopts earlyprintk=serial,ttyS0,57600 console=tty0 console=ttyS0,57600 autobench_args: root=/dev/sda1 ABAT:1160100417
> afinfo corrupted at init/main.c:536
> Initializing CPU#0
> PID hash table entries: 4096 (order: 12, 32768 bytes)
> afinfo corrupted at init/main.c:545
> afinfo corrupted at init/main.c:548
> disabling early console
> Console: colour VGA+ 80x25
> Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
> Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
> afinfo corrupted at init/main.c:582
> Checking aperture...
> PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> Placing software IO TLB between 0x310c2000 - 0x350c2000
> Memory: 48422908k/50331648k available (2566k kernel code, 858868k reserved, 1345k data, 184k init)
> afinfo corrupted at init/main.c:584
> Calibrating delay using timer specific routine.. 5678.09 BogoMIPS (lpj=11356196)
> afinfo corrupted at init/main.c:593
> afinfo corrupted at init/main.c:603
> Mount-cache hash table entries: 256
> afinfo corrupted at init/main.c:610
> afinfo corrupted at init/main.c:618
> CPU: Trace cache: 12K uops, L1 D cache: 16K
> CPU: L2 cache: 1024K
> CPU: L3 cache: 4096K
> using mwait in idle threads.
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 0
> CPU0: Thermal monitoring enabled (TM1)
> SMP alternatives: switching to UP code
> ACPI: Core revision 20060707
> ..MP-BIOS bug: 8254 timer not connected to IO-APIC
> Using local APIC timer interrupts.
> result 10425595
> Detected 10.425 MHz APIC timer.
> afinfo corrupted at init/main.c:749
> SMP alternatives: switching to SMP code
> Booting processor 1/16 APIC 0x1
> Initializing CPU#1
> Calibrating delay using timer specific routine.. 5671.84 BogoMIPS (lpj=11343696)
> CPU: Trace cache: 12K uops, L1 D cache: 16K
> CPU: L2 cache: 1024K
> CPU: L3 cache: 4096K
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 0
> CPU1: Thermal monitoring enabled (TM1)
> Intel(R) Xeon(TM) MP CPU 2.83GHz stepping 01
> CPU 1: Syncing TSC to CPU 0.
> CPU 1: synchronized TSC with CPU 0 (last diff -2 cycles, maxerr 799 cycles)
> SMP alternatives: switching to SMP code
> Booting processor 2/16 APIC 0x6
> Initializing CPU#2
> Calibrating delay using timer specific routine.. 5671.98 BogoMIPS (lpj=11343971)
> CPU: Trace cache: 12K uops, L1 D cache: 16K
> CPU: L2 cache: 1024K
> CPU: L3 cache: 4096K
> CPU: Physical Processor ID: 3
> CPU: Processor Core ID: 0
> CPU2: Thermal monitoring enabled (TM1)
> Intel(R) Xeon(TM) MP CPU 2.83GHz stepping 01
> CPU 2: Syncing TSC to CPU 0.
> CPU 2: synchronized TSC with CPU 0 (last diff -184 cycles, maxerr 3349 cycles)
> SMP alternatives: switching to SMP code
> Booting processor 3/16 APIC 0x7
> Initializing CPU#3
> Calibrating delay using timer specific routine.. 5672.02 BogoMIPS (lpj=11344041)
> CPU: Trace cache: 12K uops, L1 D cache: 16K
> CPU: L2 cache: 1024K
> CPU: L3 cache: 4096K
> CPU: Physical Processor ID: 3
> CPU: Processor Core ID: 0
> CPU3: Thermal monitoring enabled (TM1)
> Intel(R) Xeon(TM) MP CPU 2.83GHz stepping 01
> CPU 3: Syncing TSC to CPU 0.
> CPU 3: synchronized TSC with CPU 0 (last diff -100 cycles, maxerr 1989 cycles)
> SMP alternatives: switching to SMP code
> Booting processor 4/16 APIC 0x10
> Initializing CPU#4
> Calibrating delay using timer specific routine.. 5672.07 BogoMIPS (lpj=11344144)
> CPU: Trace cache: 12K uops, L1 D cache: 16K
> CPU: L2 cache: 1024K
> CPU: L3 cache: 4096K
> CPU: Physical Processor ID: 8
> CPU: Processor Core ID: 0
> CPU4: Thermal monitoring enabled (TM1)
> Intel(R) Xeon(TM) MP CPU 2.83GHz stepping 01
> CPU 4: Syncing TSC to CPU 0.
> CPU 4: synchronized TSC with CPU 0 (last diff 43 cycles, maxerr 3247 cycles)
> SMP alternatives: switching to SMP code
> Booting processor 5/16 APIC 0x11
> Initializing CPU#5
> Calibrating delay using timer specific routine.. 5672.01 BogoMIPS (lpj=11344024)
> CPU: Trace cache: 12K uops, L1 D cache: 16K
> CPU: L2 cache: 1024K
> CPU: L3 cache: 4096K
> CPU: Physical Processor ID: 8
> CPU: Processor Core ID: 0
> CPU5: Thermal monitoring enabled (TM1)
> Intel(R) Xeon(TM) MP CPU 2.83GHz stepping 01
> CPU 5: Syncing TSC to CPU 0.
> CPU 5: synchronized TSC with CPU 0 (last diff 21 cycles, maxerr 3349 cycles)
> SMP alternatives: switching to SMP code
> Booting processor 6/16 APIC 0x16
> Initializing CPU#6
> Calibrating delay using timer specific routine.. 5672.02 BogoMIPS (lpj=11344042)
> CPU: Trace cache: 12K uops, L1 D cache: 16K
> CPU: L2 cache: 1024K
> CPU: L3 cache: 4096K
> CPU: Physical Processor ID: 11
> CPU: Processor Core ID: 0
> CPU6: Thermal monitoring enabled (TM1)
> Intel(R) Xeon(TM) MP CPU 2.83GHz stepping 01
> CPU 6: Syncing TSC to CPU 0.
> CPU 6: synchronized TSC with CPU 0 (last diff 257 cycles, maxerr 3383 cycles)
> SMP alternatives: switching to SMP code
> Booting processor 7/16 APIC 0x17
> Initializing CPU#7
> Calibrating delay using timer specific routine.. 5672.10 BogoMIPS (lpj=11344218)
> CPU: Trace cache: 12K uops, L1 D cache: 16K
> CPU: L2 cache: 1024K
> CPU: L3 cache: 4096K
> CPU: Physical Processor ID: 11
> CPU: Processor Core ID: 0
> CPU7: Thermal monitoring enabled (TM1)
> Intel(R) Xeon(TM) MP CPU 2.83GHz stepping 01
> CPU 7: Syncing TSC to CPU 0.
> CPU 7: synchronized TSC with CPU 0 (last diff 233 cycles, maxerr 3357 cycles)
> SMP alternatives: switching to SMP code
> Booting processor 8/16 APIC 0x20
> Initializing CPU#8
> Calibrating delay using timer specific routine.. 5672.35 BogoMIPS (lpj=11344712)
> CPU: Trace cache: 12K uops, L1 D cache: 16K
> CPU: L2 cache: 1024K
> CPU: L3 cache: 4096K
> CPU: Physical Processor ID: 16
> CPU: Processor Core ID: 0
> CPU8: Thermal monitoring enabled (TM1)
> Intel(R) Xeon(TM) MP CPU 2.83GHz stepping 01
> CPU 8: Syncing TSC to CPU 0.
> CPU 8: synchronized TSC with CPU 0 (last diff 140 cycles, maxerr 8509 cycles)
> SMP alternatives: switching to SMP code
> Booting processor 9/16 APIC 0x21
> Initializing CPU#9
> Calibrating delay using timer specific routine.. 5672.25 BogoMIPS (lpj=11344515)
> CPU: Trace cache: 12K uops, L1 D cache: 16K
> CPU: L2 cache: 1024K
> CPU: L3 cache: 4096K
> CPU: Physical Processor ID: 16
> CPU: Processor Core ID: 0
> CPU9: Thermal monitoring enabled (TM1)
> Intel(R) Xeon(TM) MP CPU 2.83GHz stepping 01
> CPU 9: Syncing TSC to CPU 0.
> CPU 9: synchronized TSC with CPU 0 (last diff -100 cycles, maxerr 7556 cycles)
> SMP alternatives: switching to SMP code
> Booting processor 10/16 APIC 0x26
> Initializing CPU#10
> Calibrating delay using timer specific routine.. 5672.33 BogoMIPS (lpj=11344676)
> CPU: Trace cache: 12K uops, L1 D cache: 16K
> CPU: L2 cache: 1024K
> CPU: L3 cache: 4096K
> CPU: Physical Processor ID: 19
> CPU: Processor Core ID: 0
> CPU10: Thermal monitoring enabled (TM1)
> Intel(R) Xeon(TM) MP CPU 2.83GHz stepping 01
> CPU 10: Syncing TSC to CPU 0.
> CPU 10: synchronized TSC with CPU 0 (last diff 405 cycles, maxerr 8126 cycles)
> SMP alternatives: switching to SMP code
> Booting processor 11/16 APIC 0x27
> Initializing CPU#11
> Calibrating delay using timer specific routine.. 5672.46 BogoMIPS (lpj=11344939)
> CPU: Trace cache: 12K uops, L1 D cache: 16K
> CPU: L2 cache: 1024K
> CPU: L3 cache: 4096K
> CPU: Physical Processor ID: 19
> CPU: Processor Core ID: 0
> CPU11: Thermal monitoring enabled (TM1)
> Intel(R) Xeon(TM) MP CPU 2.83GHz stepping 01
> CPU 11: Syncing TSC to CPU 0.
> CPU 11: synchronized TSC with CPU 0 (last diff -145 cycles, maxerr 8568 cycles)
> SMP alternatives: switching to SMP code
> Booting processor 12/16 APIC 0x30
> Initializing CPU#12
> Calibrating delay using timer specific routine.. 5672.23 BogoMIPS (lpj=11344472)
> CPU: Trace cache: 12K uops, L1 D cache: 16K
> CPU: L2 cache: 1024K
> CPU: L3 cache: 4096K
> CPU: Physical Processor ID: 24
> CPU: Processor Core ID: 0
> CPU12: Thermal monitoring enabled (TM1)
> Intel(R) Xeon(TM) MP CPU 2.83GHz stepping 01
> CPU 12: Syncing TSC to CPU 0.
> CPU 12: synchronized TSC with CPU 0 (last diff 419 cycles, maxerr 8602 cycles)
> SMP alternatives: switching to SMP code
> Booting processor 13/16 APIC 0x31
> Initializing CPU#13
> Calibrating delay using timer specific routine.. 5672.34 BogoMIPS (lpj=11344689)
> CPU: Trace cache: 12K uops, L1 D cache: 16K
> CPU: L2 cache: 1024K
> CPU: L3 cache: 4096K
> CPU: Physical Processor ID: 24
> CPU: Processor Core ID: 0
> CPU13: Thermal monitoring enabled (TM1)
> Intel(R) Xeon(TM) MP CPU 2.83GHz stepping 01
> CPU 13: Syncing TSC to CPU 0.
> CPU 13: synchronized TSC with CPU 0 (last diff 242 cycles, maxerr 8636 cycles)
> SMP alternatives: switching to SMP code
> Booting processor 14/16 APIC 0x36
> Initializing CPU#14
> Calibrating delay using timer specific routine.. 5672.32 BogoMIPS (lpj=11344644)
> CPU: Trace cache: 12K uops, L1 D cache: 16K
> CPU: L2 cache: 1024K
> CPU: L3 cache: 4096K
> CPU: Physical Processor ID: 27
> CPU: Processor Core ID: 0
> CPU14: Thermal monitoring enabled (TM1)
> Intel(R) Xeon(TM) MP CPU 2.83GHz stepping 01
> CPU 14: Syncing TSC to CPU 0.
> CPU 14: synchronized TSC with CPU 0 (last diff -272 cycles, maxerr 8109 cycles)
> SMP alternatives: switching to SMP code
> Booting processor 15/16 APIC 0x37
> Initializing CPU#15
> Calibrating delay using timer specific routine.. 5672.21 BogoMIPS (lpj=11344423)
> CPU: Trace cache: 12K uops, L1 D cache: 16K
> CPU: L2 cache: 1024K
> CPU: L3 cache: 4096K
> CPU: Physical Processor ID: 27
> CPU: Processor Core ID: 0
> CPU15: Thermal monitoring enabled (TM1)
> Intel(R) Xeon(TM) MP CPU 2.83GHz stepping 01
> CPU 15: Syncing TSC to CPU 0.
> CPU 15: synchronized TSC with CPU 0 (last diff -21 cycles, maxerr 8560 cycles)
> Brought up 16 CPUs
> testing NMI watchdog ... OK.
> time.c: Using 333.333333 MHz WALL PIT GTOD PIT/HPET timer.
> time.c: Detected 2835.773 MHz processor.
> afinfo corrupted at init/main.c:755
> migration_cost=19,988
> afinfo corrupted at init/main.c:761
> afinfo corrupted at init/main.c:769
> Calling initcall 0xffffffff802166c0: init_smp_flush+0x0/0x60()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80607a40: helper_init+0x0/0x40()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80607dd0: pm_init+0x0/0x40()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80607e50: ksysfs_init+0x0/0x40()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060a720: filelock_init+0x0/0x40()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060b230: init_script_binfmt+0x0/0x10()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060b240: init_elf_binfmt+0x0/0x10()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80614690: sock_init+0x0/0x60()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80614e30: netlink_proto_init+0x0/0x1a0()
> afinfo corrupted at init/main.c:659
> NET: Registered protocol family 16
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060c310: kobject_uevent_init+0x0/0x40()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060c4a0: pcibus_class_init+0x0/0x10()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060ca70: pci_driver_init+0x0/0x10()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060ef30: tty_class_init+0x0/0x30()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060fa20: vtconsole_class_init+0x0/0xc0()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060cbb0: acpi_pci_init+0x0/0x40()
> afinfo corrupted at init/main.c:659
> ACPI: bus type pci registered
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060d8ef: init_acpi_device_notify+0x0/0x4b()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80613aa0: pci_access_init+0x0/0x30()
> afinfo corrupted at init/main.c:659
> PCI: Using configuration type 1
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80605760: topology_init+0x0/0x40()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80607770: param_sysfs_init+0x0/0x200()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80249d00: pm_sysrq_init+0x0/0x20()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060aee0: init_bio+0x0/0x110()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060c1d0: genhd_device_init+0x0/0x60()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060d702: acpi_init+0x0/0x1ed()
> afinfo corrupted at init/main.c:659
> ACPI: Interpreter enabled
> ACPI: Using IOAPIC for interrupt routing
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060dbd5: acpi_ec_init+0x0/0x62()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060dfee: acpi_pci_root_init+0x0/0x28()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060e036: acpi_pci_link_init+0x0/0x48()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060e1bc: acpi_power_init+0x0/0x77()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060e233: acpi_system_init+0x0/0xc6()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060e2f9: acpi_event_init+0x0/0x3f()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060e338: acpi_scan_init+0x0/0x1ac()
> afinfo corrupted at init/main.c:659
> ACPI: PCI Root Bridge [VP00] (0000:00)
> PCI: Ignoring BAR0-3 of IDE controller 0000:00:0f.1
> ACPI: PCI Root Bridge [VP01] (0000:01)
> ACPI: PCI Root Bridge [VP02] (0000:02)
> ACPI: PCI Root Bridge [VP03] (0000:04)
> ACPI: PCI Root Bridge [VP04] (0000:06)
> ACPI: PCI Root Bridge [VP05] (0000:08)
> ACPI: PCI Root Bridge [VP06] (0000:0a)
> ACPI: PCI Root Bridge [VP07] (0000:0c)
> ACPI: PCI Root Bridge [VP10] (0000:0e)
> ACPI: PCI Root Bridge [VP11] (0000:0f)
> ACPI: PCI Root Bridge [VP12] (0000:10)
> ACPI: PCI Root Bridge [VP13] (0000:12)
> ACPI: PCI Root Bridge [VP14] (0000:14)
> ACPI: PCI Root Bridge [VP15] (0000:16)
> ACPI: PCI Root Bridge [VP16] (0000:18)
> ACPI: PCI Root Bridge [VP17] (0000:1a)
> ACPI: PCI Root Bridge [VP20] (0000:1c)
> ACPI: PCI Root Bridge [VP21] (0000:1d)
> ACPI: PCI Root Bridge [VP22] (0000:1e)
> ACPI: PCI Root Bridge [VP23] (0000:20)
> ACPI: PCI Root Bridge [VP24] (0000:22)
> ACPI: PCI Root Bridge [VP25] (0000:24)
> ACPI: PCI Root Bridge [VP26] (0000:26)
> ACPI: PCI Root Bridge [VP27] (0000:28)
> ACPI: PCI Root Bridge [VP30] (0000:2a)
> ACPI: PCI Root Bridge [VP31] (0000:2b)
> ACPI: PCI Root Bridge [VP32] (0000:2c)
> ACPI: PCI Root Bridge [VP33] (0000:2e)
> ACPI: PCI Root Bridge [VP34] (0000:30)
> ACPI: PCI Root Bridge [VP35] (0000:32)
> ACPI: PCI Root Bridge [VP36] (0000:34)
> ACPI: PCI Root Bridge [VP37] (0000:36)
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060e654: acpi_cm_sbs_init+0x0/0xc()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060e660: pnp_init+0x0/0x30()
> afinfo corrupted at init/main.c:659
> Linux Plug and Play Support v0.97 (c) Adam Belay
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060e8f0: pnpacpi_init+0x0/0x70()
> afinfo corrupted at init/main.c:659
> pnp: PnP ACPI init
> pnp: PnP ACPI: found 47 devices
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060f490: misc_init+0x0/0x90()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80375670: cn_init+0x0/0xe0()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff806117f0: init_scsi+0x0/0x90()
> afinfo corrupted at init/main.c:659
> SCSI subsystem initialized
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff806124d0: serio_init+0x0/0xd0()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff806128f0: input_init+0x0/0x120()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80612d00: rtc_init+0x0/0x50()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80612d50: rtc_sysfs_init+0x0/0x10()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80612d60: rtc_proc_init+0x0/0x10()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80612d70: rtc_dev_init+0x0/0xb0()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80613ad0: pci_acpi_init+0x0/0xb0()
> afinfo corrupted at init/main.c:659
> PCI: Using ACPI for IRQ routing
> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80613b80: pci_legacy_init+0x0/0x120()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80614130: pcibios_irq_init+0x0/0x4f0()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80614620: pcibios_init+0x0/0x70()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80614750: proto_init+0x0/0x40()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff806148f0: net_dev_init+0x0/0x210()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80614fd0: genl_init+0x0/0xb0()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff805fdfc0: late_hpet_init+0x0/0xb0()
> afinfo corrupted at init/main.c:659
> hpet0: at MMIO 0xfde84000, IRQs 2, 8, 0
> hpet0: 3 64-bit timers, 3707069 Hz
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff806000b0: pci_iommu_init+0x0/0x20()
> afinfo corrupted at init/main.c:659
> PCI-GART: No AMD northbridge found.
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060a6a0: init_pipe_fs+0x0/0x50()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060e524: acpi_motherboard_init+0x0/0x130()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060e790: pnp_system_init+0x0/0x10()
> afinfo corrupted at init/main.c:659
> pnp: 00:0a: ioport range 0x400-0x47f has been reserved
> pnp: 00:0a: ioport range 0x480-0x4ff could not be reserved
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060ec70: chr_dev_init+0x0/0x80()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80610a40: firmware_class_init+0x0/0x80()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff806134b0: pcibios_assign_resources+0x0/0x90()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff806159e0: inet_init+0x0/0x400()
> afinfo corrupted at init/main.c:659
> NET: Registered protocol family 2
> IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
> TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> TCP: Hash tables configured (established 262144 bind 65536)
> TCP reno registered
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8020db10: time_init_device+0x0/0x30()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff805fe9f0: i8259A_init_sysfs+0x0/0x30()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff805fe9c0: init_timer_sysfs+0x0/0x30()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff805ff010: vsyscall_init+0x0/0xb0()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff805ff2a0: sbf_init+0x0/0xe0()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80600080: i8237A_init_sysfs+0x0/0x30()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80600500: periodic_mcheck_init+0x0/0x30()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80600530: mce_init_device+0x0/0x80()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80600670: thermal_throttle_init_device+0x0/0x70()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff806006e0: threshold_init_device+0x0/0x50()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80601ee0: init_lapic_sysfs+0x0/0x40()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80602a80: ioapic_init_sysfs+0x0/0xf0()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8021d1f0: cache_sysfs_init+0x0/0x60()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80605870: x8664_sysctl_init+0x0/0x20()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80606d30: create_proc_profile+0x0/0x280()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80607170: ioresources_init+0x0/0x50()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff806072e0: timekeeping_init_device+0x0/0x30()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80607400: uid_cache_init+0x0/0x90()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80607970: init_posix_timers+0x0/0xd0()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80607a80: init_posix_cpu_timers+0x0/0xf0()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80607ba0: latency_init+0x0/0x30()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80607c90: init_clocksource_sysfs+0x0/0x60()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80607cf0: init_jiffies_clocksource+0x0/0x10()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80607d00: init+0x0/0x70()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80607d70: proc_dma_init+0x0/0x30()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80245840: percpu_modinit+0x0/0x80()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80607da0: kallsyms_init+0x0/0x30()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80607e10: ikconfig_init+0x0/0x40()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80608f60: init_per_zone_pages_min+0x0/0x60()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80609ed0: pdflush_init+0x0/0x20()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80609f20: kswapd_init+0x0/0x30()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80609f50: setup_vmstat+0x0/0x20()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80609fc0: procswaps_init+0x0/0x30()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060a030: hugetlb_init+0x0/0x70()
> afinfo corrupted at init/main.c:659
> Total HugeTLB memory allocated, 0
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060a0a0: init_tmpfs+0x0/0xe0()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060a180: cpucache_init+0x0/0x40()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060a6f0: fasync_init+0x0/0x30()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060ae00: aio_setup+0x0/0x70()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060b080: inotify_setup+0x0/0x10()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060b090: inotify_user_setup+0x0/0xc0()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060b150: eventpoll_init+0x0/0xe0()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060b250: init_mbcache+0x0/0x30()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060b280: dnotify_init+0x0/0x30()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060b740: init_devpts_fs+0x0/0x40()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060b780: init_reiserfs_fs+0x0/0x80()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060b800: init_ext3_fs+0x0/0x70()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060b930: journal_init+0x0/0xe0()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060ba10: init_ext2_fs+0x0/0x70()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060bad0: init_ramfs_fs+0x0/0x10()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060bae0: init_hugetlbfs_fs+0x0/0x80()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060bba0: init_fat_fs+0x0/0x50()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060bbf0: init_vfat_fs+0x0/0x10()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060bc00: init_nls_cp437+0x0/0x10()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060bc10: init_nls_iso8859_1+0x0/0x10()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060bc20: init_autofs_fs+0x0/0x10()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060bc30: init_autofs4_fs+0x0/0x10()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> initcall at 0xffffffff8060bc30: init_autofs4_fs+0x0/0x10(): returned with error code -16
> Calling initcall 0xffffffff8060bc40: ipc_init+0x0/0x20()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060bf10: init_mqueue_fs+0x0/0xe0()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060bff0: crypto_algapi_init+0x0/0x10()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060c030: init+0x0/0x10()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060c040: init+0x0/0x10()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060c230: noop_init+0x0/0x10()
> afinfo corrupted at init/main.c:659
> io scheduler noop registered
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060c240: as_init+0x0/0x10()
> afinfo corrupted at init/main.c:659
> io scheduler anticipatory registered (default)
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060c250: deadline_init+0x0/0x10()
> afinfo corrupted at init/main.c:659
> io scheduler deadline registered
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060c260: cfq_init+0x0/0xb0()
> afinfo corrupted at init/main.c:659
> io scheduler cfq registered
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8032c1d0: pci_init+0x0/0x30()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060ca80: pci_sysfs_init+0x0/0x40()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060cac0: pci_proc_init+0x0/0x70()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060d93a: acpi_ac_init+0x0/0x45()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060d97f: acpi_battery_init+0x0/0x45()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060df90: acpi_video_init+0x0/0x5e()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060e07e: irqrouter_init_sysfs+0x0/0x38()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060ed10: rand_initialize+0x0/0x30()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060ed40: tty_init+0x0/0x1f0()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060efa0: pty_init+0x0/0x4f0()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060fae0: hpet_init+0x0/0x70()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060fb50: agp_init+0x0/0x30()
> afinfo corrupted at init/main.c:659
> Linux agpgart interface v0.101 (c) Dave Jones
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff8060fcb0: cn_proc_init+0x0/0x40()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff806100f0: serial8250_init+0x0/0x150()
> afinfo corrupted at init/main.c:659
> Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
> serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80610320: serial8250_pnp_init+0x0/0x10()
> afinfo corrupted at init/main.c:659
> 00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> 00:04: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80610330: serial8250_pci_init+0x0/0x10()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80384c90: topology_sysfs_init+0x0/0x50()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80610ac0: e1000_init_module+0x0/0x50()
> afinfo corrupted at init/main.c:659
> Intel(R) PRO/1000 Network Driver - version 7.2.9-k2
> Copyright (c) 1999-2006 Intel Corporation.
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80610b10: tg3_init+0x0/0x10()
> afinfo corrupted at init/main.c:659
> tg3.c:v3.66 (September 23, 2006)
> ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 24 (level, low) -> IRQ 24
> eth0: Tigon3 [partno(BCM95704A6) rev 2100 PHY(5704)] (PCIX:66MHz:64-bit) 10/100/1000BaseT Ethernet 00:0d:60:98:63:54
> eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[1] TSOcap[0]
> eth0: dma_rwctrl[769f0000] dma_mask[64-bit]
> ACPI: PCI Interrupt 0000:01:01.1[B] -> GSI 28 (level, low) -> IRQ 28
> eth1: Tigon3 [partno(BCM95704A6) rev 2100 PHY(5704)] (PCIX:66MHz:64-bit) 10/100/1000BaseT Ethernet 00:0d:60:98:63:55
> eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
> eth1: dma_rwctrl[769f0000] dma_mask[64-bit]
> ACPI: PCI Interrupt 0000:0f:01.0[A] -> GSI 96 (level, low) -> IRQ 96
> eth2: Tigon3 [partno(BCM95704A6) rev 2100 PHY(5704)] (PCIX:66MHz:64-bit) 10/100/1000BaseT Ethernet 00:14:5e:1c:45:0c
> eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[1] TSOcap[0]
> eth2: dma_rwctrl[769f0000] dma_mask[64-bit]
> ACPI: PCI Interrupt 0000:0f:01.1[B] -> GSI 100 (level, low) -> IRQ 100
> eth3: Tigon3 [partno(BCM95704A6) rev 2100 PHY(5704)] (PCIX:66MHz:64-bit) 10/100/1000BaseT Ethernet 00:14:5e:1c:45:0d
> eth3: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
> eth3: dma_rwctrl[769f0000] dma_mask[64-bit]
> ACPI: PCI Interrupt 0000:1d:01.0[A] -> GSI 168 (level, low) -> IRQ 168
> eth4: Tigon3 [partno(BCM95704A6) rev 2100 PHY(5704)] (PCIX:66MHz:64-bit) 10/100/1000BaseT Ethernet 00:14:5e:1c:45:6c
> eth4: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[1] TSOcap[0]
> eth4: dma_rwctrl[769f0000] dma_mask[64-bit]
> ACPI: PCI Interrupt 0000:1d:01.1[B] -> GSI 172 (level, low) -> IRQ 172
> eth5: Tigon3 [partno(BCM95704A6) rev 2100 PHY(5704)] (PCIX:66MHz:64-bit) 10/100/1000BaseT Ethernet 00:14:5e:1c:45:6d
> eth5: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
> eth5: dma_rwctrl[769f0000] dma_mask[64-bit]
> ACPI: PCI Interrupt 0000:2b:01.0[A] -> GSI 240 (level, low) -> IRQ 240
> eth6: Tigon3 [partno(BCM95704A6) rev 2100 PHY(5704)] (PCIX:66MHz:64-bit) 10/100/1000BaseT Ethernet 00:14:5e:1c:43:82
> eth6: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[1] TSOcap[0]
> eth6: dma_rwctrl[769f0000] dma_mask[64-bit]
> ACPI: PCI Interrupt 0000:2b:01.1[B] -> GSI 244 (level, low) -> IRQ 244
> eth7: Tigon3 [partno(BCM95704A6) rev 2100 PHY(5704)] (PCIX:66MHz:64-bit) 10/100/1000BaseT Ethernet 00:14:5e:1c:43:83
> eth7: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
> eth7: dma_rwctrl[769f0000] dma_mask[64-bit]
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80610ba0: net_olddevs_init+0x0/0xc0()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff803a8630: init_netconsole+0x0/0x80()
> afinfo corrupted at init/main.c:659
> netconsole: not configured, aborting
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff803a8710: cmd64x_ide_init+0x0/0x10()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80610c70: piix_ide_init+0x0/0xd0()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff803aa810: svwks_ide_init+0x0/0x10()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff803ab480: generic_ide_init+0x0/0x10()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80610db0: ide_init+0x0/0x90()
> afinfo corrupted at init/main.c:659
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> SvrWks CSB6: IDE controller at PCI slot 0000:00:0f.1
> SvrWks CSB6: chipset revision 160
> SvrWks CSB6: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0x0700-0x0707, BIOS settings: hda:DMA, hdb:DMA
> SvrWks CSB6: simplex device: DMA disabled
> ide1: SvrWks CSB6 Bus-Master DMA disabled (BIOS)
> hda: MATSHITADVD-ROM SR-8178, ATAPI CD/DVD-ROM drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80611780: ide_generic_init+0x0/0x20()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff806117a0: idedisk_init+0x0/0x10()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff806117b0: ide_cdrom_init+0x0/0x10()
> afinfo corrupted at init/main.c:659
> hda: ATAPI 24X DVD-ROM drive, 256kB Cache, UDMA(66)
> Uniform CD-ROM driver Revision: 3.20
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff806117c0: idefloppy_init+0x0/0x30()
> afinfo corrupted at init/main.c:659
> ide-floppy driver 0.99.newide
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80611a90: raid_init+0x0/0x10()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80611aa0: spi_transport_init+0x0/0x40()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80611ae0: fc_transport_init+0x0/0x50()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80611b30: iscsi_transport_init+0x0/0x120()
> afinfo corrupted at init/main.c:659
> Loading iSCSI transport class v2.0-685.afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80611c50: sas_transport_init+0x0/0xc0()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80611d10: iscsi_tcp_init+0x0/0x50()
> afinfo corrupted at init/main.c:659
> iscsi: registered transport (tcp)
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80611d60: aac_init+0x0/0x70()
> afinfo corrupted at init/main.c:659
> Adaptec aacraid driver (1.1-5[2409]-mh2)
> ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 25 (level, low) -> IRQ 25
> AAC0: kernel 5.0-2[8264]
> AAC0: monitor 5.0-2[8264]
> AAC0: bios 5.0-2[8264]
> AAC0: serial 162348
> AAC0: 64bit support enabled.
> AAC0: 64 Bit DAC enabled
> scsi0 : ServeRAID
> scsi 0:0:0:0: Direct-Access IBM Drive 1 V1.0 PQ: 0 ANSI: 2
> scsi 0:0:1:0: Direct-Access IBM Drive 2 V1.0 PQ: 0 ANSI: 2
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80611dd0: qla1280_init+0x0/0x10()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80611fa0: sym2_init+0x0/0x110()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff806120b0: init_sd+0x0/0x60()
> afinfo corrupted at init/main.c:659
> SCSI device sda: 143132672 512-byte hdwr sectors (73284 MB)
> sda: assuming Write Enabled
> sda: assuming drive cache: write through
> SCSI device sda: 143132672 512-byte hdwr sectors (73284 MB)
> sda: assuming Write Enabled
> sda: assuming drive cache: write through
> sda: sda1 sda2 sda3
> sd 0:0:0:0: Attached scsi removable disk sda
> SCSI device sdb: 143132672 512-byte hdwr sectors (73284 MB)
> sdb: assuming Write Enabled
> sdb: assuming drive cache: write through
> SCSI device sdb: 143132672 512-byte hdwr sectors (73284 MB)
> sdb: assuming Write Enabled
> sdb: assuming drive cache: write through
> sdb: sdb1 sdb2 sdb3
> sd 0:0:1:0: Attached scsi removable disk sdb
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80612110: fusion_init+0x0/0x100()
> afinfo corrupted at init/main.c:659
> Fusion MPT base driver 3.04.01
> Copyright (c) 1999-2005 LSI Logic Corporation
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80612210: mptspi_init+0x0/0xc0()
> afinfo corrupted at init/main.c:659
> Fusion MPT SPI Host driver 3.04.01
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff806122d0: mptfc_init+0x0/0xf0()
> afinfo corrupted at init/main.c:659
> Fusion MPT FC Host driver 3.04.01
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff806123c0: mptctl_init+0x0/0x100()
> afinfo corrupted at init/main.c:659
> Fusion MPT misc device (ioctl) driver 3.04.01
> mptctl: Registered with Fusion MPT base driver
> mptctl: /dev/mptctl @ (major,minor=10,220)
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff806124c0: cdrom_init+0x0/0x10()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff806125a0: i8042_init+0x0/0x350()
> afinfo corrupted at init/main.c:659
> PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
> serio: i8042 KBD port at 0x60,0x64 irq 1
> serio: i8042 AUX port at 0x60,0x64 irq 12
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80612a10: mousedev_init+0x0/0x100()
> afinfo corrupted at init/main.c:659
> mice: PS/2 mouse device common for all mice
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80612b10: atkbd_init+0x0/0x20()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80612e20: hwmon_init+0x0/0x40()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80614c60: flow_cache_init+0x0/0x1d0()
> afinfo corrupted at init/main.c:659
> input: AT Translated Set 2 keyboard as /class/input/input0
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff806160f0: init_syncookies+0x0/0x20()
> afinfo corrupted at init/main.c:659
> afinfo corrupted at init/main.c:663
> Calling initcall 0xffffffff80616110: xfrm4_beet_init+0x0/0x20()
> afinfo corrupted at init/main.c:659
> Unable to handle kernel NULL pointer dereference at 0000000000000827 RIP:
> [<ffffffff80470666>] xfrm_register_mode+0x36/0x60
> PGD 0
> Oops: 0000 [1] SMP
> CPU 0
> Modules linked in:
> Pid: 1, comm: swapper Not tainted 2.6.18-git22 #2
> RIP: 0010:[<ffffffff80470666>] [<ffffffff80470666>] xfrm_register_mode+0x36/0x60
> RSP: 0000:ffff810bffcbded0 EFLAGS: 00010286
> RAX: 000000000000081f RBX: ffffffff805588a0 RCX: 0000000000100000
> RDX: ffffffffffffffff RSI: 0000000000000002 RDI: ffffffff80559550
> RBP: 00000000ffffffef R08: 0000000000000002 R09: fffffffffffffffd
> R10: 0000000000000002 R11: 0000000000000000 R12: 0000000000000000
> R13: ffff810bffcbdef0 R14: 0000000000000000 R15: 0000000000000000
> FS: 0000000000000000(0000) GS:ffffffff805d2000(0000) knlGS:0000000000000000
> CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
> CR2: 0000000000000827 CR3: 0000000000201000 CR4: 00000000000006e0
> Process swapper (pid: 1, threadinfo ffff810bffcbc000, task ffff810bffcbb4e0)
> Stack: 0000000000000000 0000000000000000 ffffffff8061fee8 ffffffff802071d6
> 6f6320726f727265 000036312d206564 0000000000000000 0000000000000000
> 0000000000000000 0000000000000000 0000000000000000 0000000000090000
> Call Trace:
> [<ffffffff802071d6>] init+0x1b6/0x3b0
> [<ffffffff8020aa28>] child_rip+0xa/0x12
> [<ffffffff80339542>] acpi_ds_init_one_object+0x0/0x82
> [<ffffffff80207020>] init+0x0/0x3b0
> [<ffffffff8020aa1e>] child_rip+0x0/0x12
>
>
> Code: 48 83 78 08 00 75 06 48 89 58 08 31 ed 48 89 d7 e8 e5 fe ff
> RIP [<ffffffff80470666>] xfrm_register_mode+0x36/0x60
> RSP <ffff810bffcbded0>
> CR2: 0000000000000827
> <0>Kernel panic - not syncing: Aiee, killing interrupt handler!
>
>
> --
>
> Steve Fox
> IBM Linux Technology Center
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/

--
--
Mel Gorman
Part-time Phd Student Linux Technology Center
University of Limerick IBM Dublin Software Lab
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-10-06 16:35    [W:0.524 / U:0.596 seconds]
©2003-2014 Jasper Spaans. Advertise on this site