lkml.org 
[lkml]   [2006]   [Oct]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: 2.6.19-rc[1-4]: boot fail with (lapic && on_battery)
From
Date
On Tue, 2006-10-31 at 22:27 +0100, Ernst Herzberg wrote:
> With 2.6.18.x everything works fine.
>
> But 2.16.19-rc does not boot if the laptop runs on battery _and_ lapic
> is
> defined as boot parameter.
>
> The kernel loads and starts, for a fraction of a second some messages
> appears,
> then the screen goes blank and nothing more happens.
>
> I'm unable to read the last message, screen blanking is to fast, but
> the
> 'picture' looks like that he stops near the messages where at the
> normal
> boot demsg "Local APIC disabled by BIOS -- you can enable it with
> "lapic""
> appears.

Hi,
If you don't enable lapic, you will see cat /proc/interrupts with
XT-PIC.
if you try enable lapic, somehow IRQ routing should change
and if /proc/interrupts still the same, with IRQs on XT-PIC.
I think, lapic still not enable and you just get problems.
Unless you know that lapic works, you should try it enable because it a
trap that just give you a problem.
Some years ago (2002/3) was a very common bug kernel try enable
automatically lapic (when BIOS don't) and computer hangs .


--
Sérgio M.B.
[unhandled content-type:application/x-pkcs7-signature]
\
 
 \ /
  Last update: 2006-11-01 01:29    [W:0.071 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site