lkml.org 
[lkml]   [2006]   [Oct]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    Subject2.6.19-rc3-git7: scsi_device_unbusy: inconsistent lock state
    I just tried out 2.6.19-rc3-git7 here, and managed to get
    an "inconsistent lock state" traceback during boot time
    (with appropriate lock debugging stuff enabled).

    System has a few libata devices, and the traceback is from scsi_device_unbusy.

    dmesg output follows, kernel .config is attached.

    Cheers

    Linux version 2.6.19-rc3-git7-ml (root@host59) (gcc version 4.1.0 (SUSE Linux)) #3 SMP Mon Oct 30 09:23:39 EST 2006
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000003e7a0000 (usable)
    BIOS-e820: 000000003e7a0000 - 000000003e7ae000 (ACPI data)
    BIOS-e820: 000000003e7ae000 - 000000003e7e0000 (ACPI NVS)
    BIOS-e820: 000000003e7e0000 - 000000003e800000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
    103MB HIGHMEM available.
    896MB LOWMEM available.
    found SMP MP-table at 000ff780
    Entering add_active_range(0, 0, 255904) 0 entries of 256 used
    Zone PFN ranges:
    DMA 0 -> 4096
    Normal 4096 -> 229376
    HighMem 229376 -> 255904
    early_node_map[1] active PFN ranges
    0: 0 -> 255904
    On node 0 totalpages: 255904
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 4064 pages, LIFO batch:0
    Normal zone: 1760 pages used for memmap
    Normal zone: 223520 pages, LIFO batch:31
    HighMem zone: 207 pages used for memmap
    HighMem zone: 26321 pages, LIFO batch:7
    DMI 2.4 present.
    ACPI: RSDP (v002 ACPIAM ) @ 0x000fa9a0
    ACPI: XSDT (v001 A M I OEMXSDT 0x08000604 MSFT 0x00000097) @ 0x3e7a0100
    ACPI: FADT (v003 A M I OEMFACP 0x08000604 MSFT 0x00000097) @ 0x3e7a0290
    ACPI: MADT (v001 A M I OEMAPIC 0x08000604 MSFT 0x00000097) @ 0x3e7a0390
    ACPI: MCFG (v001 A M I OEMMCFG 0x08000604 MSFT 0x00000097) @ 0x3e7a0400
    ACPI: OEMB (v001 A M I AMI_OEM 0x08000604 MSFT 0x00000097) @ 0x3e7ae040
    ACPI: DSDT (v001 A0518 A0518000 0x00000000 INTL 0x20060113) @ 0x00000000
    ACPI: PM-Timer IO Port: 0x808
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Processor #0 6:15 APIC version 20
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    Processor #1 6:15 APIC version 20
    ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
    ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Enabling APIC mode: Flat. Using 1 I/O APICs
    Using ACPI (MADT) for SMP configuration information
    Allocating PCI resources starting at 40000000 (gap: 3e800000:c0600000)
    Detected 1866.796 MHz processor.
    Built 1 zonelists. Total pages: 253905
    Kernel command line: root=/dev/sda2 vga=0x31a resume=/dev/sda1
    mapped APIC to ffffd000 (fee00000)
    mapped IOAPIC to ffffc000 (fec00000)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 16384 bytes)
    Console: colour dummy device 80x25
    Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
    ... MAX_LOCKDEP_SUBCLASSES: 8
    ... MAX_LOCK_DEPTH: 30
    ... MAX_LOCKDEP_KEYS: 2048
    ... CLASSHASH_SIZE: 1024
    ... MAX_LOCKDEP_ENTRIES: 8192
    ... MAX_LOCKDEP_CHAINS: 8192
    ... CHAINHASH_SIZE: 4096
    memory used by lock dependency info: 904 kB
    per task-struct memory footprint: 1200 bytes
    ------------------------
    | Locking API testsuite:
    ----------------------------------------------------------------------------
    | spin |wlock |rlock |mutex | wsem | rsem |
    --------------------------------------------------------------------------
    A-A deadlock: ok | ok | ok | ok | ok | ok |
    A-B-B-A deadlock: ok | ok | ok | ok | ok | ok |
    A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok |
    A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok |
    A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
    A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
    A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok |
    double unlock: ok | ok | ok | ok | ok | ok |
    initialize held: ok | ok | ok | ok | ok | ok |
    bad unlock order: ok | ok | ok | ok | ok | ok |
    --------------------------------------------------------------------------
    recursive read-lock: | ok | | ok |
    recursive read-lock #2: | ok | | ok |
    mixed read-write-lock: | ok | | ok |
    mixed write-read-lock: | ok | | ok |
    --------------------------------------------------------------------------
    hard-irqs-on + irq-safe-A/12: ok | ok | ok |
    soft-irqs-on + irq-safe-A/12: ok | ok | ok |
    hard-irqs-on + irq-safe-A/21: ok | ok | ok |
    soft-irqs-on + irq-safe-A/21: ok | ok | ok |
    sirq-safe-A => hirqs-on/12: ok | ok | ok |
    sirq-safe-A => hirqs-on/21: ok | ok | ok |
    hard-safe-A + irqs-on/12: ok | ok | ok |
    soft-safe-A + irqs-on/12: ok | ok | ok |
    hard-safe-A + irqs-on/21: ok | ok | ok |
    soft-safe-A + irqs-on/21: ok | ok | ok |
    hard-safe-A + unsafe-B #1/123: ok | ok | ok |
    soft-safe-A + unsafe-B #1/123: ok | ok | ok |
    hard-safe-A + unsafe-B #1/132: ok | ok | ok |
    soft-safe-A + unsafe-B #1/132: ok | ok | ok |
    hard-safe-A + unsafe-B #1/213: ok | ok | ok |
    soft-safe-A + unsafe-B #1/213: ok | ok | ok |
    hard-safe-A + unsafe-B #1/231: ok | ok | ok |
    soft-safe-A + unsafe-B #1/231: ok | ok | ok |
    hard-safe-A + unsafe-B #1/312: ok | ok | ok |
    soft-safe-A + unsafe-B #1/312: ok | ok | ok |
    hard-safe-A + unsafe-B #1/321: ok | ok | ok |
    soft-safe-A + unsafe-B #1/321: ok | ok | ok |
    hard-safe-A + unsafe-B #2/123: ok | ok | ok |
    soft-safe-A + unsafe-B #2/123: ok | ok | ok |
    hard-safe-A + unsafe-B #2/132: ok | ok | ok |
    soft-safe-A + unsafe-B #2/132: ok | ok | ok |
    hard-safe-A + unsafe-B #2/213: ok | ok | ok |
    soft-safe-A + unsafe-B #2/213: ok | ok | ok |
    hard-safe-A + unsafe-B #2/231: ok | ok | ok |
    soft-safe-A + unsafe-B #2/231: ok | ok | ok |
    hard-safe-A + unsafe-B #2/312: ok | ok | ok |
    soft-safe-A + unsafe-B #2/312: ok | ok | ok |
    hard-safe-A + unsafe-B #2/321: ok | ok | ok |
    soft-safe-A + unsafe-B #2/321: ok | ok | ok |
    hard-irq lock-inversion/123: ok | ok | ok |
    soft-irq lock-inversion/123: ok | ok | ok |
    hard-irq lock-inversion/132: ok | ok | ok |
    soft-irq lock-inversion/132: ok | ok | ok |
    hard-irq lock-inversion/213: ok | ok | ok |
    soft-irq lock-inversion/213: ok | ok | ok |
    hard-irq lock-inversion/231: ok | ok | ok |
    soft-irq lock-inversion/231: ok | ok | ok |
    hard-irq lock-inversion/312: ok | ok | ok |
    soft-irq lock-inversion/312: ok | ok | ok |
    hard-irq lock-inversion/321: ok | ok | ok |
    soft-irq lock-inversion/321: ok | ok | ok |
    hard-irq read-recursion/123: ok |
    soft-irq read-recursion/123: ok |
    hard-irq read-recursion/132: ok |
    soft-irq read-recursion/132: ok |
    hard-irq read-recursion/213: ok |
    soft-irq read-recursion/213: ok |
    hard-irq read-recursion/231: ok |
    soft-irq read-recursion/231: ok |
    hard-irq read-recursion/312: ok |
    soft-irq read-recursion/312: ok |
    hard-irq read-recursion/321: ok |
    soft-irq read-recursion/321: ok |
    -------------------------------------------------------
    Good, all 218 testcases passed! |
    ---------------------------------
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 1005060k/1023616k available (2443k kernel code, 17752k reserved, 1029k data, 268k init, 106112k highmem)
    virtual kernel memory layout:
    fixmap : 0xfff9d000 - 0xfffff000 ( 392 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
    lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
    .init : 0xc04bb000 - 0xc04fe000 ( 268 kB)
    .data : 0xc0362ff4 - 0xc046450c (1029 kB)
    .text : 0xc0100000 - 0xc0362ff4 (2443 kB)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Calibrating delay using timer specific routine.. 3736.91 BogoMIPS (lpj=7473831)
    Mount-cache hash table entries: 512
    CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
    monitor/mwait feature present.
    using mwait in idle threads.
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 2048K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    CPU: After all inits, caps: bfebfbff 20100000 00000000 00000940 0000e3bd 00000000 00000001
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Compat vDSO mapped to ffffe000.
    Checking 'hlt' instruction... OK.
    Freeing SMP alternatives: 12k freed
    ACPI: Core revision 20060707
    CPU0: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz stepping 06
    lockdep: not fixing up alternatives.
    Booting processor 1/1 eip 2000
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 3733.62 BogoMIPS (lpj=7467242)
    CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
    monitor/mwait feature present.
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 2048K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 1
    CPU: After all inits, caps: bfebfbff 20100000 00000000 00000940 0000e3bd 00000000 00000001
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#1.
    CPU1: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz stepping 06
    Total of 2 processors activated (7470.53 BogoMIPS).
    ENABLING IO-APIC IRQs
    ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
    checking TSC synchronization across 2 CPUs: passed.
    Brought up 2 CPUs
    migration_cost=29
    checking if image is initramfs... it is
    Freeing initrd memory: 2390k freed
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
    PCI: Not using MMCONFIG.
    PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6
    PCI: Using configuration type 1
    Setting up standard PCI resources
    ACPI: Interpreter enabled
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: Probing PCI hardware (bus 00)
    Boot video device is 0000:00:02.0
    PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
    PCI quirk: region 0480-04bf claimed by ICH6 GPIO
    PCI: Transparent bridge - 0000:00:1e.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    pnp: PnP ACPI: found 15 devices
    SCSI subsystem initialized
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    pnp: 00:07: ioport range 0x290-0x297 has been reserved
    PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
    PCI: Bridge: 0000:00:01.0
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: afd00000-afdfffff
    PCI: Bridge: 0000:00:1c.0
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: afe00000-afefffff
    PCI: Bridge: 0000:00:1c.4
    IO window: b000-bfff
    MEM window: ff600000-ff6fffff
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:1c.5
    IO window: a000-afff
    MEM window: ff500000-ff5fffff
    PREFETCH window: disabled.
    PCI: Bridge: 0000:05:04.0
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: aff00000-bfefffff
    PCI: Bridge: 0000:00:1e.0
    IO window: disabled.
    MEM window: ff700000-ff7fffff
    PREFETCH window: aff00000-bfefffff
    ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:01.0 to 64
    ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:00:1c.4 to 64
    ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:1c.5 to 64
    PCI: Setting latency timer of device 0000:00:1e.0 to 64
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 10, 4194304 bytes)
    TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    highmem bounce pool size: 64 pages
    Total HugeTLB memory allocated, 0
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 5120k, total 7616k
    vesafb: mode is 1280x1024x16, linelength=2560, pages=1
    vesafb: protected mode interface info at 00ff:44f0
    vesafb: scrolling: redraw
    vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
    Console: switching to colour frame buffer device 160x64
    fb0: VESA VGA frame buffer device
    vga16fb: initializing
    vga16fb: mapped to 0xc00a0000
    fb1: VGA16 VGA frame buffer device
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Real Time Clock Driver v1.12ac
    Linux agpgart interface v0.101 (c) Dave Jones
    agpgart: Detected an Intel 965G Chipset.
    agpgart: Detected 7676K stolen memory.
    agpgart: AGP aperture is 256M @ 0xd0000000
    intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets
    intelfb: Version 0.9.4
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
    loop: loaded (max 8 devices)
    libata version 2.00 loaded.
    ahci 0000:03:00.0: version 2.0
    ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:03:00.0 to 64
    ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
    ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
    ata1: SATA max UDMA/133 cmd 0xF880C100 ctl 0x0 bmdma 0x0 irq 16
    ata2: SATA max UDMA/133 cmd 0xF880C180 ctl 0x0 bmdma 0x0 irq 16
    scsi0 : ahci
    ata1: SATA link down (SStatus 0 SControl 300)
    scsi1 : ahci
    ata2: softreset failed (1st FIS failed)
    ata2: softreset failed, retrying in 5 secs
    ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata2.00: ATA-6, max UDMA/133, 72303840 sectors: LBA48
    ata2.00: ata2: dev 0 multi count 0
    ata2.00: applying bridge limits
    ata2.00: configured for UDMA/100
    scsi 1:0:0:0: Direct-Access ATA WDC WD360GD-50GH 37.0 PQ: 0 ANSI: 5
    SCSI device sda: 72303840 512-byte hdwr sectors (37020 MB)
    sda: Write Protect is off
    sda: Mode Sense: 00 3a 00 00
    SCSI device sda: drive cache: write back
    SCSI device sda: 72303840 512-byte hdwr sectors (37020 MB)
    sda: Write Protect is off
    sda: Mode Sense: 00 3a 00 00
    SCSI device sda: drive cache: write back
    sda: sda1 sda2
    sd 1:0:0:0: Attached scsi disk sda
    sd 1:0:0:0: Attached scsi generic sg0 type 0
    PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    input: PC Speaker as /class/input/input0
    input: AT Translated Set 2 keyboard as /class/input/input1
    TCP cubic registered
    NET: Registered protocol family 1
    Starting balanced_irq
    Using IPI Shortcut mode
    Time: tsc clocksource has been installed.
    Freeing unused kernel memory: 268k freed
    ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ AMI] OemTableId [ CPU1PM] [20060707]
    ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ AMI] OemTableId [ CPU2PM] [20060707]
    ACPI: Getting cpuindex for acpiid 0x3
    ACPI: Getting cpuindex for acpiid 0x4
    input: ImPS/2 Generic Wheel Mouse as /class/input/input2
    BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
    ata_piix 0000:00:1f.2: version 2.00ac6
    ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
    ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:1f.2 to 64
    ata3: SATA max UDMA/133 cmd 0xE880 ctl 0xE802 bmdma 0xE080 irq 18
    ata4: SATA max UDMA/133 cmd 0xE480 ctl 0xE402 bmdma 0xE088 irq 18
    scsi2 : ata_piix
    ATA: abnormal status 0x7F on port 0xE887
    scsi3 : ata_piix
    ata4.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 0/32)
    ata4.00: ata4: dev 0 multi count 16
    ata4.00: configured for UDMA/133
    scsi 3:0:0:0: Direct-Access ATA Maxtor 7B320S0 BANC PQ: 0 ANSI: 5
    SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
    sdb: Write Protect is off
    sdb: Mode Sense: 00 3a 00 00
    SCSI device sdb: drive cache: write through
    SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
    sdb: Write Protect is off
    sdb: Mode Sense: 00 3a 00 00
    SCSI device sdb: drive cache: write through
    sdb: unknown partition table
    sd 3:0:0:0: Attached scsi disk sdb
    sd 3:0:0:0: Attached scsi generic sg1 type 0
    ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
    ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:1f.5 to 64
    ata5: SATA max UDMA/133 cmd 0xD080 ctl 0xD002 bmdma 0xC800 irq 18
    ata6: SATA max UDMA/133 cmd 0xCC00 ctl 0xC882 bmdma 0xC808 irq 18
    scsi4 : ata_piix
    ATA: abnormal status 0x7F on port 0xD087
    scsi5 : ata_piix
    ATA: abnormal status 0x7F on port 0xCC07
    warning: process `ls' used the removed sysctl system call
    ReiserFS: sda2: found reiserfs format "3.6" with standard journal
    ReiserFS: sda2: using ordered data mode
    ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    ReiserFS: sda2: checking transaction log (sda2)
    ReiserFS: sda2: Using r5 hash to sort names
    warning: process `showconsole' used the removed sysctl system call
    Adding 1518100k swap on /dev/sda1. Priority:-1 extents:1 across:1518100k
    warning: process `showconsole' used the removed sysctl system call
    warning: process `ls' used the removed sysctl system call
    device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
    warning: process `showconsole' used the removed sysctl system call
    ACPI: Power Button (FF) [PWRF]
    ACPI: Power Button (CM) [PWRB]

    =================================
    [ INFO: inconsistent lock state ]
    2.6.19-rc3-git7-ml #3
    ---------------------------------
    inconsistent {in-softirq-W} -> {softirq-on-W} usage.
    startproc/4046 [HC0[0]:SC0[0]:HE1:SE1] takes:
    (&q->__queue_lock){-+..}, at: [<c0219091>] cfq_set_request+0x351/0x3b0
    {in-softirq-W} state was registered at:
    [<c01376b1>] mark_lock+0x81/0x5f0
    [<c0138a90>] __lock_acquire+0x660/0xc10
    [<c013939d>] lock_acquire+0x5d/0x80
    [<c0361c59>] _spin_lock+0x29/0x40
    [<c029fa24>] scsi_device_unbusy+0x64/0x90
    [<c029a5bc>] scsi_finish_command+0x1c/0xa0
    [<c02115c2>] blk_done_softirq+0x62/0x70
    [<c0122a27>] __do_softirq+0x87/0x100
    [<c0122af5>] do_softirq+0x55/0x60
    [<c0122f3c>] ksoftirqd+0x7c/0xd0
    [<c0130f76>] kthread+0xf6/0x100
    [<c0103c6f>] kernel_thread_helper+0x7/0x18
    [<ffffffff>] 0xffffffff
    irq event stamp: 3331
    hardirqs last enabled at (3331): [<c016326d>] kmem_cache_alloc+0x6d/0xa0
    hardirqs last disabled at (3330): [<c016321f>] kmem_cache_alloc+0x1f/0xa0
    softirqs last enabled at (3012): [<c0122af5>] do_softirq+0x55/0x60
    softirqs last disabled at (2971): [<c0122af5>] do_softirq+0x55/0x60

    other info that might help us debug this:
    no locks held by startproc/4046.

    stack backtrace:
    [<c0104042>] dump_trace+0x192/0x1c0
    [<c0104088>] show_trace_log_lvl+0x18/0x30
    [<c010483f>] show_trace+0xf/0x20
    [<c01049a5>] dump_stack+0x15/0x20
    [<c0137291>] print_usage_bug+0x251/0x270
    [<c0137ae7>] mark_lock+0x4b7/0x5f0
    [<c0138aae>] __lock_acquire+0x67e/0xc10
    [<c013939d>] lock_acquire+0x5d/0x80
    [<c0361c59>] _spin_lock+0x29/0x40
    [<c0219091>] cfq_set_request+0x351/0x3b0
    [<c020c7fc>] elv_set_request+0x1c/0x40
    [<c020fcff>] get_request+0x23f/0x270
    [<c0210537>] get_request_wait+0x27/0x120
    [<c02107ca>] __make_request+0x5a/0x350
    [<c020f40f>] generic_make_request+0x16f/0x220
    [<c02117e4>] submit_bio+0x64/0x110
    [<c018e969>] mpage_bio_submit+0x19/0x20
    [<c018fe85>] mpage_readpages+0x105/0x140
    [<c014d67f>] __do_page_cache_readahead+0x17f/0x260
    [<c014d7d2>] blockable_page_cache_readahead+0x72/0xd0
    [<c014da25>] page_cache_readahead+0x135/0x1e0
    [<c01474ce>] do_generic_mapping_read+0x55e/0x5a0
    [<c01496b1>] generic_file_aio_read+0x101/0x270
    [<c01669b5>] do_sync_read+0xd5/0x120
    [<c01672d1>] vfs_read+0xa1/0x160
    [<c0167851>] sys_read+0x41/0x70
    [<c0102f71>] sysenter_past_esp+0x56/0x8d
    [<b7efd410>] 0xb7efd410
    =======================
    IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
    pvm:~#
    #
    # Automatically generated make config: don't edit
    # Linux kernel version: 2.6.19-rc3-git7
    # Mon Oct 30 09:23:22 2006
    #
    CONFIG_X86_32=y
    CONFIG_GENERIC_TIME=y
    CONFIG_LOCKDEP_SUPPORT=y
    CONFIG_STACKTRACE_SUPPORT=y
    CONFIG_SEMAPHORE_SLEEPERS=y
    CONFIG_X86=y
    CONFIG_MMU=y
    CONFIG_GENERIC_ISA_DMA=y
    CONFIG_GENERIC_IOMAP=y
    CONFIG_GENERIC_HWEIGHT=y
    CONFIG_ARCH_MAY_HAVE_PC_FDC=y
    CONFIG_DMI=y
    CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

    #
    # Code maturity level options
    #
    CONFIG_EXPERIMENTAL=y
    CONFIG_LOCK_KERNEL=y
    CONFIG_INIT_ENV_ARG_LIMIT=32

    #
    # General setup
    #
    CONFIG_LOCALVERSION="-ml"
    CONFIG_LOCALVERSION_AUTO=y
    CONFIG_SWAP=y
    CONFIG_SYSVIPC=y
    # CONFIG_IPC_NS is not set
    CONFIG_POSIX_MQUEUE=y
    CONFIG_BSD_PROCESS_ACCT=y
    # CONFIG_BSD_PROCESS_ACCT_V3 is not set
    # CONFIG_TASKSTATS is not set
    # CONFIG_UTS_NS is not set
    # CONFIG_AUDIT is not set
    CONFIG_IKCONFIG=y
    CONFIG_IKCONFIG_PROC=y
    # CONFIG_CPUSETS is not set
    # CONFIG_RELAY is not set
    CONFIG_INITRAMFS_SOURCE=""
    # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
    CONFIG_SYSCTL=y
    # CONFIG_EMBEDDED is not set
    CONFIG_UID16=y
    # CONFIG_SYSCTL_SYSCALL is not set
    CONFIG_KALLSYMS=y
    CONFIG_KALLSYMS_ALL=y
    # CONFIG_KALLSYMS_EXTRA_PASS is not set
    CONFIG_HOTPLUG=y
    CONFIG_PRINTK=y
    CONFIG_BUG=y
    CONFIG_ELF_CORE=y
    CONFIG_BASE_FULL=y
    CONFIG_FUTEX=y
    CONFIG_EPOLL=y
    CONFIG_SHMEM=y
    CONFIG_SLAB=y
    CONFIG_VM_EVENT_COUNTERS=y
    CONFIG_RT_MUTEXES=y
    # CONFIG_TINY_SHMEM is not set
    CONFIG_BASE_SMALL=0
    # CONFIG_SLOB is not set

    #
    # Loadable module support
    #
    CONFIG_MODULES=y
    CONFIG_MODULE_UNLOAD=y
    CONFIG_MODULE_FORCE_UNLOAD=y
    CONFIG_MODVERSIONS=y
    # CONFIG_MODULE_SRCVERSION_ALL is not set
    CONFIG_KMOD=y
    CONFIG_STOP_MACHINE=y

    #
    # Block layer
    #
    CONFIG_BLOCK=y
    CONFIG_LBD=y
    # CONFIG_BLK_DEV_IO_TRACE is not set
    # CONFIG_LSF is not set

    #
    # IO Schedulers
    #
    CONFIG_IOSCHED_NOOP=y
    CONFIG_IOSCHED_AS=y
    CONFIG_IOSCHED_DEADLINE=y
    CONFIG_IOSCHED_CFQ=y
    # CONFIG_DEFAULT_AS is not set
    # CONFIG_DEFAULT_DEADLINE is not set
    CONFIG_DEFAULT_CFQ=y
    # CONFIG_DEFAULT_NOOP is not set
    CONFIG_DEFAULT_IOSCHED="cfq"

    #
    # Processor type and features
    #
    CONFIG_SMP=y
    CONFIG_X86_PC=y
    # CONFIG_X86_ELAN is not set
    # CONFIG_X86_VOYAGER is not set
    # CONFIG_X86_NUMAQ is not set
    # CONFIG_X86_SUMMIT is not set
    # CONFIG_X86_BIGSMP is not set
    # CONFIG_X86_VISWS is not set
    # CONFIG_X86_GENERICARCH is not set
    # CONFIG_X86_ES7000 is not set
    # CONFIG_M386 is not set
    # CONFIG_M486 is not set
    # CONFIG_M586 is not set
    # CONFIG_M586TSC is not set
    # CONFIG_M586MMX is not set
    # CONFIG_M686 is not set
    # CONFIG_MPENTIUMII is not set
    # CONFIG_MPENTIUMIII is not set
    # CONFIG_MPENTIUMM is not set
    CONFIG_MPENTIUM4=y
    # CONFIG_MK6 is not set
    # CONFIG_MK7 is not set
    # CONFIG_MK8 is not set
    # CONFIG_MCRUSOE is not set
    # CONFIG_MEFFICEON is not set
    # CONFIG_MWINCHIPC6 is not set
    # CONFIG_MWINCHIP2 is not set
    # CONFIG_MWINCHIP3D is not set
    # CONFIG_MGEODEGX1 is not set
    # CONFIG_MGEODE_LX is not set
    # CONFIG_MCYRIXIII is not set
    # CONFIG_MVIAC3_2 is not set
    CONFIG_X86_GENERIC=y
    CONFIG_X86_CMPXCHG=y
    CONFIG_X86_XADD=y
    CONFIG_X86_L1_CACHE_SHIFT=7
    CONFIG_RWSEM_XCHGADD_ALGORITHM=y
    CONFIG_GENERIC_CALIBRATE_DELAY=y
    CONFIG_X86_WP_WORKS_OK=y
    CONFIG_X86_INVLPG=y
    CONFIG_X86_BSWAP=y
    CONFIG_X86_POPAD_OK=y
    CONFIG_X86_CMPXCHG64=y
    CONFIG_X86_GOOD_APIC=y
    CONFIG_X86_INTEL_USERCOPY=y
    CONFIG_X86_USE_PPRO_CHECKSUM=y
    CONFIG_X86_TSC=y
    CONFIG_HPET_TIMER=y
    CONFIG_HPET_EMULATE_RTC=y
    CONFIG_NR_CPUS=2
    # CONFIG_SCHED_SMT is not set
    CONFIG_SCHED_MC=y
    # CONFIG_PREEMPT_NONE is not set
    CONFIG_PREEMPT_VOLUNTARY=y
    # CONFIG_PREEMPT is not set
    # CONFIG_PREEMPT_BKL is not set
    CONFIG_X86_LOCAL_APIC=y
    CONFIG_X86_IO_APIC=y
    CONFIG_X86_MCE=y
    # CONFIG_X86_MCE_NONFATAL is not set
    CONFIG_X86_MCE_P4THERMAL=y
    CONFIG_VM86=y
    # CONFIG_TOSHIBA is not set
    # CONFIG_I8K is not set
    # CONFIG_X86_REBOOTFIXUPS is not set
    CONFIG_MICROCODE=m
    CONFIG_MICROCODE_OLD_INTERFACE=y
    CONFIG_X86_MSR=m
    CONFIG_X86_CPUID=m

    #
    # Firmware Drivers
    #
    CONFIG_EDD=m
    # CONFIG_EFI_VARS is not set
    CONFIG_DELL_RBU=m
    CONFIG_DCDBAS=m
    # CONFIG_NOHIGHMEM is not set
    CONFIG_HIGHMEM4G=y
    # CONFIG_HIGHMEM64G is not set
    CONFIG_PAGE_OFFSET=0xC0000000
    CONFIG_HIGHMEM=y
    CONFIG_ARCH_FLATMEM_ENABLE=y
    CONFIG_ARCH_SPARSEMEM_ENABLE=y
    CONFIG_ARCH_SELECT_MEMORY_MODEL=y
    CONFIG_ARCH_POPULATES_NODE_MAP=y
    CONFIG_SELECT_MEMORY_MODEL=y
    CONFIG_FLATMEM_MANUAL=y
    # CONFIG_DISCONTIGMEM_MANUAL is not set
    # CONFIG_SPARSEMEM_MANUAL is not set
    CONFIG_FLATMEM=y
    CONFIG_FLAT_NODE_MEM_MAP=y
    CONFIG_SPARSEMEM_STATIC=y
    CONFIG_SPLIT_PTLOCK_CPUS=4
    # CONFIG_RESOURCES_64BIT is not set
    # CONFIG_HIGHPTE is not set
    # CONFIG_MATH_EMULATION is not set
    CONFIG_MTRR=y
    CONFIG_EFI=y
    CONFIG_IRQBALANCE=y
    CONFIG_BOOT_IOREMAP=y
    CONFIG_REGPARM=y
    # CONFIG_SECCOMP is not set
    # CONFIG_HZ_100 is not set
    CONFIG_HZ_250=y
    # CONFIG_HZ_1000 is not set
    CONFIG_HZ=250
    # CONFIG_KEXEC is not set
    # CONFIG_CRASH_DUMP is not set
    CONFIG_PHYSICAL_START=0x100000
    # CONFIG_HOTPLUG_CPU is not set
    CONFIG_COMPAT_VDSO=y
    CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

    #
    # Power management options (ACPI, APM)
    #
    CONFIG_PM=y
    # CONFIG_PM_LEGACY is not set
    # CONFIG_PM_DEBUG is not set
    CONFIG_PM_SYSFS_DEPRECATED=y

    #
    # ACPI (Advanced Configuration and Power Interface) Support
    #
    CONFIG_ACPI=y
    CONFIG_ACPI_AC=m
    CONFIG_ACPI_BATTERY=m
    CONFIG_ACPI_BUTTON=m
    # CONFIG_ACPI_VIDEO is not set
    # CONFIG_ACPI_HOTKEY is not set
    CONFIG_ACPI_FAN=m
    # CONFIG_ACPI_DOCK is not set
    CONFIG_ACPI_PROCESSOR=m
    CONFIG_ACPI_THERMAL=m
    # CONFIG_ACPI_ASUS is not set
    # CONFIG_ACPI_IBM is not set
    # CONFIG_ACPI_TOSHIBA is not set
    # CONFIG_ACPI_CUSTOM_DSDT is not set
    CONFIG_ACPI_BLACKLIST_YEAR=0
    # CONFIG_ACPI_DEBUG is not set
    CONFIG_ACPI_EC=y
    CONFIG_ACPI_POWER=y
    CONFIG_ACPI_SYSTEM=y
    CONFIG_X86_PM_TIMER=y
    # CONFIG_ACPI_CONTAINER is not set
    # CONFIG_ACPI_SBS is not set

    #
    # APM (Advanced Power Management) BIOS Support
    #
    # CONFIG_APM is not set

    #
    # CPU Frequency scaling
    #
    CONFIG_CPU_FREQ=y
    CONFIG_CPU_FREQ_TABLE=m
    # CONFIG_CPU_FREQ_DEBUG is not set
    # CONFIG_CPU_FREQ_STAT is not set
    CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
    # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
    CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
    CONFIG_CPU_FREQ_GOV_POWERSAVE=m
    CONFIG_CPU_FREQ_GOV_USERSPACE=m
    CONFIG_CPU_FREQ_GOV_ONDEMAND=m
    CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m

    #
    # CPUFreq processor drivers
    #
    CONFIG_X86_ACPI_CPUFREQ=m
    # CONFIG_X86_POWERNOW_K6 is not set
    # CONFIG_X86_POWERNOW_K7 is not set
    # CONFIG_X86_POWERNOW_K8 is not set
    # CONFIG_X86_GX_SUSPMOD is not set
    CONFIG_X86_SPEEDSTEP_CENTRINO=m
    CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y
    CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
    CONFIG_X86_SPEEDSTEP_ICH=m
    CONFIG_X86_SPEEDSTEP_SMI=m
    CONFIG_X86_P4_CLOCKMOD=m
    # CONFIG_X86_CPUFREQ_NFORCE2 is not set
    # CONFIG_X86_LONGRUN is not set
    # CONFIG_X86_LONGHAUL is not set

    #
    # shared options
    #
    # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
    CONFIG_X86_SPEEDSTEP_LIB=m
    CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y

    #
    # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
    #
    CONFIG_PCI=y
    # CONFIG_PCI_GOBIOS is not set
    # CONFIG_PCI_GOMMCONFIG is not set
    # CONFIG_PCI_GODIRECT is not set
    CONFIG_PCI_GOANY=y
    CONFIG_PCI_BIOS=y
    CONFIG_PCI_DIRECT=y
    CONFIG_PCI_MMCONFIG=y
    # CONFIG_PCIEPORTBUS is not set
    # CONFIG_PCI_MSI is not set
    # CONFIG_PCI_MULTITHREAD_PROBE is not set
    # CONFIG_PCI_DEBUG is not set
    # CONFIG_HT_IRQ is not set
    CONFIG_ISA_DMA_API=y
    CONFIG_ISA=y
    # CONFIG_EISA is not set
    # CONFIG_MCA is not set
    CONFIG_SCx200=m
    # CONFIG_SCx200HR_TIMER is not set

    #
    # PCCARD (PCMCIA/CardBus) support
    #
    # CONFIG_PCCARD is not set

    #
    # PCI Hotplug Support
    #
    # CONFIG_HOTPLUG_PCI is not set

    #
    # Executable file formats
    #
    CONFIG_BINFMT_ELF=y
    CONFIG_BINFMT_AOUT=m
    CONFIG_BINFMT_MISC=m

    #
    # Networking
    #
    CONFIG_NET=y

    #
    # Networking options
    #
    # CONFIG_NETDEBUG is not set
    CONFIG_PACKET=m
    CONFIG_PACKET_MMAP=y
    CONFIG_UNIX=y
    CONFIG_XFRM=y
    CONFIG_XFRM_USER=m
    # CONFIG_XFRM_SUB_POLICY is not set
    CONFIG_NET_KEY=m
    CONFIG_INET=y
    CONFIG_IP_MULTICAST=y
    CONFIG_IP_ADVANCED_ROUTER=y
    CONFIG_ASK_IP_FIB_HASH=y
    # CONFIG_IP_FIB_TRIE is not set
    CONFIG_IP_FIB_HASH=y
    CONFIG_IP_MULTIPLE_TABLES=y
    CONFIG_IP_ROUTE_MULTIPATH=y
    # CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
    CONFIG_IP_ROUTE_VERBOSE=y
    CONFIG_IP_PNP=y
    CONFIG_IP_PNP_DHCP=y
    # CONFIG_IP_PNP_BOOTP is not set
    # CONFIG_IP_PNP_RARP is not set
    CONFIG_NET_IPIP=m
    CONFIG_NET_IPGRE=m
    CONFIG_NET_IPGRE_BROADCAST=y
    CONFIG_IP_MROUTE=y
    CONFIG_IP_PIMSM_V1=y
    CONFIG_IP_PIMSM_V2=y
    # CONFIG_ARPD is not set
    CONFIG_SYN_COOKIES=y
    CONFIG_INET_AH=m
    CONFIG_INET_ESP=m
    CONFIG_INET_IPCOMP=m
    CONFIG_INET_XFRM_TUNNEL=m
    CONFIG_INET_TUNNEL=m
    # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
    # CONFIG_INET_XFRM_MODE_TUNNEL is not set
    # CONFIG_INET_XFRM_MODE_BEET is not set
    # CONFIG_INET_DIAG is not set
    # CONFIG_TCP_CONG_ADVANCED is not set
    CONFIG_TCP_CONG_CUBIC=y
    CONFIG_DEFAULT_TCP_CONG="cubic"
    # CONFIG_IPV6 is not set
    # CONFIG_INET6_XFRM_TUNNEL is not set
    # CONFIG_INET6_TUNNEL is not set
    # CONFIG_NETWORK_SECMARK is not set
    # CONFIG_NETFILTER is not set

    #
    # DCCP Configuration (EXPERIMENTAL)
    #
    # CONFIG_IP_DCCP is not set

    #
    # SCTP Configuration (EXPERIMENTAL)
    #
    CONFIG_IP_SCTP=m
    # CONFIG_SCTP_DBG_MSG is not set
    # CONFIG_SCTP_DBG_OBJCNT is not set
    # CONFIG_SCTP_HMAC_NONE is not set
    # CONFIG_SCTP_HMAC_SHA1 is not set
    CONFIG_SCTP_HMAC_MD5=y

    #
    # TIPC Configuration (EXPERIMENTAL)
    #
    # CONFIG_TIPC is not set
    # CONFIG_ATM is not set
    # CONFIG_BRIDGE is not set
    # CONFIG_VLAN_8021Q is not set
    # CONFIG_DECNET is not set
    CONFIG_LLC=m
    CONFIG_LLC2=m
    # CONFIG_IPX is not set
    # CONFIG_ATALK is not set
    # CONFIG_X25 is not set
    # CONFIG_LAPB is not set
    # CONFIG_ECONET is not set
    # CONFIG_WAN_ROUTER is not set

    #
    # QoS and/or fair queueing
    #
    # CONFIG_NET_SCHED is not set

    #
    # Network testing
    #
    CONFIG_NET_PKTGEN=m
    # CONFIG_HAMRADIO is not set
    # CONFIG_IRDA is not set
    # CONFIG_BT is not set
    # CONFIG_IEEE80211 is not set
    CONFIG_FIB_RULES=y

    #
    # Device Drivers
    #

    #
    # Generic Driver Options
    #
    # CONFIG_STANDALONE is not set
    # CONFIG_PREVENT_FIRMWARE_BUILD is not set
    CONFIG_FW_LOADER=m
    # CONFIG_DEBUG_DRIVER is not set
    # CONFIG_SYS_HYPERVISOR is not set

    #
    # Connector - unified userspace <-> kernelspace linker
    #
    CONFIG_CONNECTOR=m

    #
    # Memory Technology Devices (MTD)
    #
    # CONFIG_MTD is not set

    #
    # Parallel port support
    #
    # CONFIG_PARPORT is not set

    #
    # Plug and Play support
    #
    CONFIG_PNP=y
    # CONFIG_PNP_DEBUG is not set

    #
    # Protocols
    #
    CONFIG_ISAPNP=y
    # CONFIG_PNPBIOS is not set
    CONFIG_PNPACPI=y

    #
    # Block devices
    #
    # CONFIG_BLK_DEV_FD is not set
    # CONFIG_BLK_DEV_XD is not set
    # CONFIG_BLK_CPQ_DA is not set
    # CONFIG_BLK_CPQ_CISS_DA is not set
    # CONFIG_BLK_DEV_DAC960 is not set
    # CONFIG_BLK_DEV_UMEM is not set
    # CONFIG_BLK_DEV_COW_COMMON is not set
    CONFIG_BLK_DEV_LOOP=y
    CONFIG_BLK_DEV_CRYPTOLOOP=m
    CONFIG_BLK_DEV_NBD=m
    # CONFIG_BLK_DEV_SX8 is not set
    # CONFIG_BLK_DEV_UB is not set
    CONFIG_BLK_DEV_RAM=y
    CONFIG_BLK_DEV_RAM_COUNT=16
    CONFIG_BLK_DEV_RAM_SIZE=64000
    CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
    CONFIG_BLK_DEV_INITRD=y
    # CONFIG_CDROM_PKTCDVD is not set
    # CONFIG_ATA_OVER_ETH is not set

    #
    # Misc devices
    #
    # CONFIG_IBM_ASM is not set
    # CONFIG_SGI_IOC4 is not set
    # CONFIG_TIFM_CORE is not set

    #
    # ATA/ATAPI/MFM/RLL support
    #
    # CONFIG_IDE is not set

    #
    # SCSI device support
    #
    CONFIG_RAID_ATTRS=m
    CONFIG_SCSI=y
    # CONFIG_SCSI_NETLINK is not set
    CONFIG_SCSI_PROC_FS=y

    #
    # SCSI support type (disk, tape, CD-ROM)
    #
    CONFIG_BLK_DEV_SD=y
    # CONFIG_CHR_DEV_ST is not set
    # CONFIG_CHR_DEV_OSST is not set
    CONFIG_BLK_DEV_SR=y
    # CONFIG_BLK_DEV_SR_VENDOR is not set
    CONFIG_CHR_DEV_SG=y
    # CONFIG_CHR_DEV_SCH is not set

    #
    # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
    #
    CONFIG_SCSI_MULTI_LUN=y
    CONFIG_SCSI_CONSTANTS=y
    CONFIG_SCSI_LOGGING=y

    #
    # SCSI Transports
    #
    CONFIG_SCSI_SPI_ATTRS=m
    # CONFIG_SCSI_FC_ATTRS is not set
    # CONFIG_SCSI_ISCSI_ATTRS is not set
    CONFIG_SCSI_SAS_ATTRS=m
    CONFIG_SCSI_SAS_LIBSAS=m
    # CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set

    #
    # SCSI low-level drivers
    #
    # CONFIG_ISCSI_TCP is not set
    # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
    # CONFIG_SCSI_3W_9XXX is not set
    # CONFIG_SCSI_7000FASST is not set
    # CONFIG_SCSI_ACARD is not set
    # CONFIG_SCSI_AHA152X is not set
    # CONFIG_SCSI_AHA1542 is not set
    # CONFIG_SCSI_AACRAID is not set
    # CONFIG_SCSI_AIC7XXX is not set
    # CONFIG_SCSI_AIC7XXX_OLD is not set
    # CONFIG_SCSI_AIC79XX is not set
    # CONFIG_SCSI_AIC94XX is not set
    # CONFIG_SCSI_DPT_I2O is not set
    # CONFIG_SCSI_ADVANSYS is not set
    # CONFIG_SCSI_IN2000 is not set
    # CONFIG_SCSI_ARCMSR is not set
    # CONFIG_MEGARAID_NEWGEN is not set
    # CONFIG_MEGARAID_LEGACY is not set
    # CONFIG_MEGARAID_SAS is not set
    # CONFIG_SCSI_HPTIOP is not set
    # CONFIG_SCSI_BUSLOGIC is not set
    # CONFIG_SCSI_DMX3191D is not set
    # CONFIG_SCSI_DTC3280 is not set
    # CONFIG_SCSI_EATA is not set
    # CONFIG_SCSI_FUTURE_DOMAIN is not set
    # CONFIG_SCSI_GDTH is not set
    # CONFIG_SCSI_GENERIC_NCR5380 is not set
    # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
    # CONFIG_SCSI_IPS is not set
    # CONFIG_SCSI_INITIO is not set
    # CONFIG_SCSI_INIA100 is not set
    # CONFIG_SCSI_NCR53C406A is not set
    # CONFIG_SCSI_STEX is not set
    # CONFIG_SCSI_SYM53C8XX_2 is not set
    # CONFIG_SCSI_IPR is not set
    # CONFIG_SCSI_PAS16 is not set
    # CONFIG_SCSI_PSI240I is not set
    # CONFIG_SCSI_QLOGIC_FAS is not set
    # CONFIG_SCSI_QLOGIC_1280 is not set
    # CONFIG_SCSI_QLA_FC is not set
    # CONFIG_SCSI_QLA_ISCSI is not set
    # CONFIG_SCSI_LPFC is not set
    # CONFIG_SCSI_SYM53C416 is not set
    # CONFIG_SCSI_DC395x is not set
    # CONFIG_SCSI_DC390T is not set
    # CONFIG_SCSI_T128 is not set
    # CONFIG_SCSI_U14_34F is not set
    # CONFIG_SCSI_ULTRASTOR is not set
    # CONFIG_SCSI_NSP32 is not set
    # CONFIG_SCSI_DEBUG is not set

    #
    # Serial ATA (prod) and Parallel ATA (experimental) drivers
    #
    CONFIG_ATA=y
    CONFIG_SATA_AHCI=y
    # CONFIG_SATA_SVW is not set
    CONFIG_ATA_PIIX=m
    # CONFIG_SATA_MV is not set
    # CONFIG_SATA_NV is not set
    # CONFIG_PDC_ADMA is not set
    # CONFIG_SATA_QSTOR is not set
    # CONFIG_SATA_PROMISE is not set
    # CONFIG_SATA_SX4 is not set
    # CONFIG_SATA_SIL is not set
    # CONFIG_SATA_SIL24 is not set
    # CONFIG_SATA_SIS is not set
    # CONFIG_SATA_ULI is not set
    # CONFIG_SATA_VIA is not set
    # CONFIG_SATA_VITESSE is not set
    # CONFIG_PATA_ALI is not set
    # CONFIG_PATA_AMD is not set
    # CONFIG_PATA_ARTOP is not set
    # CONFIG_PATA_ATIIXP is not set
    # CONFIG_PATA_CMD64X is not set
    # CONFIG_PATA_CS5520 is not set
    # CONFIG_PATA_CS5530 is not set
    # CONFIG_PATA_CS5535 is not set
    # CONFIG_PATA_CYPRESS is not set
    # CONFIG_PATA_EFAR is not set
    # CONFIG_ATA_GENERIC is not set
    # CONFIG_PATA_HPT366 is not set
    # CONFIG_PATA_HPT37X is not set
    # CONFIG_PATA_HPT3X2N is not set
    # CONFIG_PATA_HPT3X3 is not set
    # CONFIG_PATA_ISAPNP is not set
    # CONFIG_PATA_IT821X is not set
    # CONFIG_PATA_JMICRON is not set
    # CONFIG_PATA_LEGACY is not set
    # CONFIG_PATA_TRIFLEX is not set
    # CONFIG_PATA_MPIIX is not set
    # CONFIG_PATA_OLDPIIX is not set
    # CONFIG_PATA_NETCELL is not set
    # CONFIG_PATA_NS87410 is not set
    # CONFIG_PATA_OPTI is not set
    # CONFIG_PATA_OPTIDMA is not set
    # CONFIG_PATA_PDC_OLD is not set
    # CONFIG_PATA_QDI is not set
    # CONFIG_PATA_RADISYS is not set
    # CONFIG_PATA_RZ1000 is not set
    # CONFIG_PATA_SC1200 is not set
    # CONFIG_PATA_SERVERWORKS is not set
    # CONFIG_PATA_PDC2027X is not set
    # CONFIG_PATA_SIL680 is not set
    # CONFIG_PATA_SIS is not set
    # CONFIG_PATA_VIA is not set
    # CONFIG_PATA_WINBOND is not set

    #
    # Old CD-ROM drivers (not SCSI, not IDE)
    #
    # CONFIG_CD_NO_IDESCSI is not set

    #
    # Multi-device support (RAID and LVM)
    #
    CONFIG_MD=y
    CONFIG_BLK_DEV_MD=y
    CONFIG_MD_LINEAR=m
    CONFIG_MD_RAID0=m
    CONFIG_MD_RAID1=m
    CONFIG_MD_RAID10=m
    CONFIG_MD_RAID456=m
    CONFIG_MD_RAID5_RESHAPE=y
    CONFIG_MD_MULTIPATH=m
    # CONFIG_MD_FAULTY is not set
    CONFIG_BLK_DEV_DM=m
    # CONFIG_DM_DEBUG is not set
    CONFIG_DM_CRYPT=m
    CONFIG_DM_SNAPSHOT=m
    CONFIG_DM_MIRROR=m
    CONFIG_DM_ZERO=m
    CONFIG_DM_MULTIPATH=m
    CONFIG_DM_MULTIPATH_EMC=m

    #
    # Fusion MPT device support
    #
    # CONFIG_FUSION is not set
    # CONFIG_FUSION_SPI is not set
    # CONFIG_FUSION_FC is not set
    # CONFIG_FUSION_SAS is not set

    #
    # IEEE 1394 (FireWire) support
    #
    CONFIG_IEEE1394=m

    #
    # Subsystem Options
    #
    # CONFIG_IEEE1394_VERBOSEDEBUG is not set
    CONFIG_IEEE1394_OUI_DB=y
    CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
    CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
    CONFIG_IEEE1394_EXPORT_FULL_API=y

    #
    # Device Drivers
    #
    CONFIG_IEEE1394_PCILYNX=m
    CONFIG_IEEE1394_OHCI1394=m

    #
    # Protocol Drivers
    #
    CONFIG_IEEE1394_VIDEO1394=m
    CONFIG_IEEE1394_SBP2=m
    # CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
    CONFIG_IEEE1394_ETH1394=m
    CONFIG_IEEE1394_DV1394=m
    CONFIG_IEEE1394_RAWIO=m

    #
    # I2O device support
    #
    # CONFIG_I2O is not set

    #
    # Network device support
    #
    CONFIG_NETDEVICES=y
    CONFIG_DUMMY=m
    # CONFIG_BONDING is not set
    # CONFIG_EQUALIZER is not set
    CONFIG_TUN=m
    # CONFIG_NET_SB1000 is not set

    #
    # ARCnet devices
    #
    # CONFIG_ARCNET is not set

    #
    # PHY device support
    #
    # CONFIG_PHYLIB is not set

    #
    # Ethernet (10 or 100Mbit)
    #
    CONFIG_NET_ETHERNET=y
    CONFIG_MII=m
    # CONFIG_HAPPYMEAL is not set
    # CONFIG_SUNGEM is not set
    # CONFIG_CASSINI is not set
    # CONFIG_NET_VENDOR_3COM is not set
    # CONFIG_LANCE is not set
    # CONFIG_NET_VENDOR_SMC is not set
    # CONFIG_NET_VENDOR_RACAL is not set

    #
    # Tulip family network device support
    #
    # CONFIG_NET_TULIP is not set
    # CONFIG_AT1700 is not set
    # CONFIG_DEPCA is not set
    # CONFIG_HP100 is not set
    # CONFIG_NET_ISA is not set
    # CONFIG_NET_PCI is not set

    #
    # Ethernet (1000 Mbit)
    #
    CONFIG_ACENIC=m
    # CONFIG_ACENIC_OMIT_TIGON_I is not set
    CONFIG_DL2K=m
    CONFIG_E1000=m
    CONFIG_E1000_NAPI=y
    # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
    CONFIG_NS83820=m
    CONFIG_HAMACHI=m
    CONFIG_YELLOWFIN=m
    CONFIG_R8169=m
    # CONFIG_R8169_NAPI is not set
    CONFIG_SIS190=m
    CONFIG_SKGE=m
    CONFIG_SKY2=m
    CONFIG_SK98LIN=m
    CONFIG_TIGON3=m
    CONFIG_BNX2=m
    CONFIG_QLA3XXX=m

    #
    # Ethernet (10000 Mbit)
    #
    # CONFIG_CHELSIO_T1 is not set
    # CONFIG_IXGB is not set
    # CONFIG_S2IO is not set
    # CONFIG_MYRI10GE is not set

    #
    # Token Ring devices
    #
    # CONFIG_TR is not set

    #
    # Wireless LAN (non-hamradio)
    #
    # CONFIG_NET_RADIO is not set

    #
    # Wan interfaces
    #
    # CONFIG_WAN is not set
    # CONFIG_FDDI is not set
    # CONFIG_HIPPI is not set
    # CONFIG_PPP is not set
    # CONFIG_SLIP is not set
    # CONFIG_NET_FC is not set
    # CONFIG_SHAPER is not set
    CONFIG_NETCONSOLE=m
    CONFIG_NETPOLL=y
    CONFIG_NETPOLL_RX=y
    CONFIG_NETPOLL_TRAP=y
    CONFIG_NET_POLL_CONTROLLER=y

    #
    # ISDN subsystem
    #
    # CONFIG_ISDN is not set

    #
    # Telephony Support
    #
    # CONFIG_PHONE is not set

    #
    # Input device support
    #
    CONFIG_INPUT=y
    # CONFIG_INPUT_FF_MEMLESS is not set

    #
    # Userland interfaces
    #
    CONFIG_INPUT_MOUSEDEV=y
    CONFIG_INPUT_MOUSEDEV_PSAUX=y
    CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
    CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
    # CONFIG_INPUT_JOYDEV is not set
    # CONFIG_INPUT_TSDEV is not set
    # CONFIG_INPUT_EVDEV is not set
    # CONFIG_INPUT_EVBUG is not set

    #
    # Input Device Drivers
    #
    CONFIG_INPUT_KEYBOARD=y
    CONFIG_KEYBOARD_ATKBD=y
    CONFIG_KEYBOARD_SUNKBD=m
    # CONFIG_KEYBOARD_LKKBD is not set
    CONFIG_KEYBOARD_XTKBD=m
    CONFIG_KEYBOARD_NEWTON=m
    # CONFIG_KEYBOARD_STOWAWAY is not set
    CONFIG_INPUT_MOUSE=y
    CONFIG_MOUSE_PS2=y
    CONFIG_MOUSE_SERIAL=m
    CONFIG_MOUSE_INPORT=m
    CONFIG_MOUSE_ATIXL=y
    CONFIG_MOUSE_LOGIBM=m
    CONFIG_MOUSE_PC110PAD=m
    # CONFIG_MOUSE_VSXXXAA is not set
    CONFIG_INPUT_JOYSTICK=y
    CONFIG_JOYSTICK_ANALOG=m
    CONFIG_JOYSTICK_A3D=m
    CONFIG_JOYSTICK_ADI=m
    CONFIG_JOYSTICK_COBRA=m
    CONFIG_JOYSTICK_GF2K=m
    CONFIG_JOYSTICK_GRIP=m
    CONFIG_JOYSTICK_GRIP_MP=m
    CONFIG_JOYSTICK_GUILLEMOT=m
    CONFIG_JOYSTICK_INTERACT=m
    CONFIG_JOYSTICK_SIDEWINDER=m
    CONFIG_JOYSTICK_TMDC=m
    CONFIG_JOYSTICK_IFORCE=m
    # CONFIG_JOYSTICK_IFORCE_USB is not set
    CONFIG_JOYSTICK_IFORCE_232=y
    CONFIG_JOYSTICK_WARRIOR=m
    CONFIG_JOYSTICK_MAGELLAN=m
    CONFIG_JOYSTICK_SPACEORB=m
    CONFIG_JOYSTICK_SPACEBALL=m
    CONFIG_JOYSTICK_STINGER=m
    # CONFIG_JOYSTICK_TWIDJOY is not set
    # CONFIG_JOYSTICK_JOYDUMP is not set
    CONFIG_INPUT_TOUCHSCREEN=y
    CONFIG_TOUCHSCREEN_GUNZE=m
    # CONFIG_TOUCHSCREEN_ELO is not set
    # CONFIG_TOUCHSCREEN_MTOUCH is not set
    # CONFIG_TOUCHSCREEN_MK712 is not set
    # CONFIG_TOUCHSCREEN_PENMOUNT is not set
    # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
    # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
    CONFIG_INPUT_MISC=y
    CONFIG_INPUT_PCSPKR=y
    # CONFIG_INPUT_WISTRON_BTNS is not set
    CONFIG_INPUT_UINPUT=m

    #
    # Hardware I/O ports
    #
    CONFIG_SERIO=y
    CONFIG_SERIO_I8042=y
    CONFIG_SERIO_SERPORT=m
    CONFIG_SERIO_CT82C710=m
    CONFIG_SERIO_PCIPS2=m
    CONFIG_SERIO_LIBPS2=y
    # CONFIG_SERIO_RAW is not set
    CONFIG_GAMEPORT=m
    CONFIG_GAMEPORT_NS558=m
    CONFIG_GAMEPORT_L4=m
    CONFIG_GAMEPORT_EMU10K1=m
    CONFIG_GAMEPORT_FM801=m

    #
    # Character devices
    #
    CONFIG_VT=y
    CONFIG_VT_CONSOLE=y
    CONFIG_HW_CONSOLE=y
    # CONFIG_VT_HW_CONSOLE_BINDING is not set
    # CONFIG_SERIAL_NONSTANDARD is not set

    #
    # Serial drivers
    #
    CONFIG_SERIAL_8250=y
    CONFIG_SERIAL_8250_CONSOLE=y
    CONFIG_SERIAL_8250_PCI=y
    CONFIG_SERIAL_8250_PNP=y
    CONFIG_SERIAL_8250_NR_UARTS=4
    CONFIG_SERIAL_8250_RUNTIME_UARTS=4
    # CONFIG_SERIAL_8250_EXTENDED is not set

    #
    # Non-8250 serial port support
    #
    CONFIG_SERIAL_CORE=y
    CONFIG_SERIAL_CORE_CONSOLE=y
    # CONFIG_SERIAL_JSM is not set
    CONFIG_UNIX98_PTYS=y
    CONFIG_LEGACY_PTYS=y
    CONFIG_LEGACY_PTY_COUNT=256

    #
    # IPMI
    #
    # CONFIG_IPMI_HANDLER is not set

    #
    # Watchdog Cards
    #
    # CONFIG_WATCHDOG is not set
    # CONFIG_HW_RANDOM is not set
    CONFIG_NVRAM=m
    CONFIG_RTC=y
    # CONFIG_DTLK is not set
    # CONFIG_R3964 is not set
    # CONFIG_APPLICOM is not set
    # CONFIG_SONYPI is not set

    #
    # Ftape, the floppy tape device driver
    #
    CONFIG_AGP=y
    CONFIG_AGP_ALI=m
    CONFIG_AGP_ATI=m
    # CONFIG_AGP_AMD is not set
    # CONFIG_AGP_AMD64 is not set
    CONFIG_AGP_INTEL=y
    CONFIG_AGP_NVIDIA=m
    # CONFIG_AGP_SIS is not set
    # CONFIG_AGP_SWORKS is not set
    # CONFIG_AGP_VIA is not set
    # CONFIG_AGP_EFFICEON is not set
    # CONFIG_DRM is not set
    # CONFIG_MWAVE is not set
    # CONFIG_SCx200_GPIO is not set
    # CONFIG_PC8736x_GPIO is not set
    # CONFIG_NSC_GPIO is not set
    # CONFIG_CS5535_GPIO is not set
    # CONFIG_RAW_DRIVER is not set
    # CONFIG_HPET is not set
    CONFIG_HANGCHECK_TIMER=m

    #
    # TPM devices
    #
    # CONFIG_TCG_TPM is not set
    # CONFIG_TELCLOCK is not set

    #
    # I2C support
    #
    CONFIG_I2C=y
    # CONFIG_I2C_CHARDEV is not set

    #
    # I2C Algorithms
    #
    CONFIG_I2C_ALGOBIT=y
    # CONFIG_I2C_ALGOPCF is not set
    # CONFIG_I2C_ALGOPCA is not set

    #
    # I2C Hardware Bus support
    #
    # CONFIG_I2C_ALI1535 is not set
    # CONFIG_I2C_ALI1563 is not set
    # CONFIG_I2C_ALI15X3 is not set
    # CONFIG_I2C_AMD756 is not set
    # CONFIG_I2C_AMD8111 is not set
    # CONFIG_I2C_I801 is not set
    # CONFIG_I2C_I810 is not set
    # CONFIG_I2C_PIIX4 is not set
    # CONFIG_I2C_NFORCE2 is not set
    # CONFIG_I2C_OCORES is not set
    # CONFIG_I2C_PARPORT_LIGHT is not set
    # CONFIG_I2C_PROSAVAGE is not set
    # CONFIG_I2C_SAVAGE4 is not set
    # CONFIG_SCx200_ACB is not set
    # CONFIG_I2C_SIS5595 is not set
    # CONFIG_I2C_SIS630 is not set
    # CONFIG_I2C_SIS96X is not set
    # CONFIG_I2C_STUB is not set
    # CONFIG_I2C_VIA is not set
    # CONFIG_I2C_VIAPRO is not set
    # CONFIG_I2C_VOODOO3 is not set
    # CONFIG_I2C_PCA_ISA is not set

    #
    # Miscellaneous I2C Chip support
    #
    # CONFIG_SENSORS_DS1337 is not set
    # CONFIG_SENSORS_DS1374 is not set
    # CONFIG_SENSORS_EEPROM is not set
    # CONFIG_SENSORS_PCF8574 is not set
    # CONFIG_SENSORS_PCA9539 is not set
    # CONFIG_SENSORS_PCF8591 is not set
    # CONFIG_SENSORS_MAX6875 is not set
    # CONFIG_I2C_DEBUG_CORE is not set
    # CONFIG_I2C_DEBUG_ALGO is not set
    # CONFIG_I2C_DEBUG_BUS is not set
    # CONFIG_I2C_DEBUG_CHIP is not set

    #
    # SPI support
    #
    # CONFIG_SPI is not set
    # CONFIG_SPI_MASTER is not set

    #
    # Dallas's 1-wire bus
    #
    # CONFIG_W1 is not set

    #
    # Hardware Monitoring support
    #
    # CONFIG_HWMON is not set
    # CONFIG_HWMON_VID is not set

    #
    # Multimedia devices
    #
    CONFIG_VIDEO_DEV=m
    CONFIG_VIDEO_V4L1=y
    CONFIG_VIDEO_V4L1_COMPAT=y
    CONFIG_VIDEO_V4L2=y

    #
    # Video Capture Adapters
    #

    #
    # Video Capture Adapters
    #
    # CONFIG_VIDEO_ADV_DEBUG is not set
    CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
    CONFIG_VIDEO_TVAUDIO=m
    CONFIG_VIDEO_TDA7432=m
    CONFIG_VIDEO_TDA9875=m
    CONFIG_VIDEO_MSP3400=m
    # CONFIG_VIDEO_VIVI is not set
    CONFIG_VIDEO_BT848=m
    # CONFIG_VIDEO_SAA6588 is not set
    # CONFIG_VIDEO_PMS is not set
    # CONFIG_VIDEO_CPIA is not set
    # CONFIG_VIDEO_CPIA2 is not set
    # CONFIG_VIDEO_SAA5246A is not set
    # CONFIG_VIDEO_SAA5249 is not set
    # CONFIG_TUNER_3036 is not set
    # CONFIG_VIDEO_STRADIS is not set
    # CONFIG_VIDEO_ZORAN is not set
    # CONFIG_VIDEO_SAA7134 is not set
    # CONFIG_VIDEO_MXB is not set
    # CONFIG_VIDEO_DPC is not set
    # CONFIG_VIDEO_HEXIUM_ORION is not set
    # CONFIG_VIDEO_HEXIUM_GEMINI is not set
    # CONFIG_VIDEO_CX88 is not set

    #
    # V4L USB devices
    #
    # CONFIG_VIDEO_PVRUSB2 is not set
    # CONFIG_VIDEO_EM28XX is not set
    # CONFIG_USB_VICAM is not set
    # CONFIG_USB_IBMCAM is not set
    # CONFIG_USB_KONICAWC is not set
    # CONFIG_USB_QUICKCAM_MESSENGER is not set
    # CONFIG_USB_ET61X251 is not set
    # CONFIG_VIDEO_OVCAMCHIP is not set
    # CONFIG_USB_W9968CF is not set
    # CONFIG_USB_OV511 is not set
    # CONFIG_USB_SE401 is not set
    # CONFIG_USB_SN9C102 is not set
    # CONFIG_USB_STV680 is not set
    # CONFIG_USB_ZC0301 is not set
    # CONFIG_USB_PWC is not set

    #
    # Radio Adapters
    #
    # CONFIG_RADIO_CADET is not set
    # CONFIG_RADIO_RTRACK is not set
    # CONFIG_RADIO_RTRACK2 is not set
    # CONFIG_RADIO_AZTECH is not set
    # CONFIG_RADIO_GEMTEK is not set
    # CONFIG_RADIO_GEMTEK_PCI is not set
    # CONFIG_RADIO_MAXIRADIO is not set
    # CONFIG_RADIO_MAESTRO is not set
    # CONFIG_RADIO_SF16FMI is not set
    # CONFIG_RADIO_SF16FMR2 is not set
    # CONFIG_RADIO_TERRATEC is not set
    # CONFIG_RADIO_TRUST is not set
    # CONFIG_RADIO_TYPHOON is not set
    # CONFIG_RADIO_ZOLTRIX is not set
    # CONFIG_USB_DSBR is not set

    #
    # Digital Video Broadcasting Devices
    #
    # CONFIG_DVB is not set
    CONFIG_VIDEO_TUNER=m
    CONFIG_VIDEO_BUF=m
    CONFIG_VIDEO_BTCX=m
    CONFIG_VIDEO_IR=m
    CONFIG_VIDEO_TVEEPROM=m
    # CONFIG_USB_DABUSB is not set

    #
    # Graphics support
    #
    CONFIG_FIRMWARE_EDID=y
    CONFIG_FB=y
    # CONFIG_FB_DDC is not set
    CONFIG_FB_CFB_FILLRECT=y
    CONFIG_FB_CFB_COPYAREA=y
    CONFIG_FB_CFB_IMAGEBLIT=y
    # CONFIG_FB_MACMODES is not set
    # CONFIG_FB_BACKLIGHT is not set
    CONFIG_FB_MODE_HELPERS=y
    CONFIG_FB_TILEBLITTING=y
    # CONFIG_FB_CIRRUS is not set
    # CONFIG_FB_PM2 is not set
    # CONFIG_FB_CYBER2000 is not set
    # CONFIG_FB_ARC is not set
    # CONFIG_FB_ASILIANT is not set
    # CONFIG_FB_IMSTT is not set
    CONFIG_FB_VGA16=y
    CONFIG_FB_VESA=y
    # CONFIG_FB_IMAC is not set
    # CONFIG_FB_HGA is not set
    # CONFIG_FB_S1D13XXX is not set
    # CONFIG_FB_NVIDIA is not set
    # CONFIG_FB_RIVA is not set
    # CONFIG_FB_I810 is not set
    CONFIG_FB_INTEL=y
    # CONFIG_FB_INTEL_DEBUG is not set
    CONFIG_FB_INTEL_I2C=y
    # CONFIG_FB_MATROX is not set
    # CONFIG_FB_RADEON is not set
    # CONFIG_FB_ATY128 is not set
    # CONFIG_FB_ATY is not set
    # CONFIG_FB_SAVAGE is not set
    # CONFIG_FB_SIS is not set
    # CONFIG_FB_NEOMAGIC is not set
    # CONFIG_FB_KYRO is not set
    # CONFIG_FB_3DFX is not set
    # CONFIG_FB_VOODOO1 is not set
    # CONFIG_FB_CYBLA is not set
    # CONFIG_FB_TRIDENT is not set
    # CONFIG_FB_GEODE is not set
    # CONFIG_FB_VIRTUAL is not set

    #
    # Console display driver support
    #
    CONFIG_VGA_CONSOLE=y
    CONFIG_VGACON_SOFT_SCROLLBACK=y
    CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
    CONFIG_VIDEO_SELECT=y
    # CONFIG_MDA_CONSOLE is not set
    CONFIG_DUMMY_CONSOLE=y
    CONFIG_FRAMEBUFFER_CONSOLE=y
    # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
    # CONFIG_FONTS is not set
    CONFIG_FONT_8x8=y
    CONFIG_FONT_8x16=y

    #
    # Logo configuration
    #
    # CONFIG_LOGO is not set
    # CONFIG_BACKLIGHT_LCD_SUPPORT is not set

    #
    # Sound
    #
    # CONFIG_SOUND is not set

    #
    # USB support
    #
    CONFIG_USB_ARCH_HAS_HCD=y
    CONFIG_USB_ARCH_HAS_OHCI=y
    CONFIG_USB_ARCH_HAS_EHCI=y
    CONFIG_USB=m
    # CONFIG_USB_DEBUG is not set

    #
    # Miscellaneous USB options
    #
    CONFIG_USB_DEVICEFS=y
    # CONFIG_USB_BANDWIDTH is not set
    # CONFIG_USB_DYNAMIC_MINORS is not set
    CONFIG_USB_SUSPEND=y
    # CONFIG_USB_OTG is not set

    #
    # USB Host Controller Drivers
    #
    CONFIG_USB_EHCI_HCD=m
    # CONFIG_USB_EHCI_SPLIT_ISO is not set
    CONFIG_USB_EHCI_ROOT_HUB_TT=y
    CONFIG_USB_EHCI_TT_NEWSCHED=y
    CONFIG_USB_ISP116X_HCD=m
    CONFIG_USB_OHCI_HCD=m
    # CONFIG_USB_OHCI_BIG_ENDIAN is not set
    CONFIG_USB_OHCI_LITTLE_ENDIAN=y
    CONFIG_USB_UHCI_HCD=m
    CONFIG_USB_SL811_HCD=m

    #
    # USB Device Class drivers
    #
    # CONFIG_USB_ACM is not set
    CONFIG_USB_PRINTER=m

    #
    # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
    #

    #
    # may also be needed; see USB_STORAGE Help for more information
    #
    CONFIG_USB_STORAGE=m
    # CONFIG_USB_STORAGE_DEBUG is not set
    CONFIG_USB_STORAGE_DATAFAB=y
    CONFIG_USB_STORAGE_FREECOM=y
    CONFIG_USB_STORAGE_DPCM=y
    CONFIG_USB_STORAGE_USBAT=y
    CONFIG_USB_STORAGE_SDDR09=y
    CONFIG_USB_STORAGE_SDDR55=y
    CONFIG_USB_STORAGE_JUMPSHOT=y
    CONFIG_USB_STORAGE_ALAUDA=y
    # CONFIG_USB_STORAGE_KARMA is not set
    CONFIG_USB_LIBUSUAL=y

    #
    # USB Input Devices
    #
    CONFIG_USB_HID=m
    CONFIG_USB_HIDINPUT=y
    # CONFIG_USB_HIDINPUT_POWERBOOK is not set
    # CONFIG_HID_FF is not set
    CONFIG_USB_HIDDEV=y

    #
    # USB HID Boot Protocol drivers
    #
    CONFIG_USB_KBD=m
    CONFIG_USB_MOUSE=m
    # CONFIG_USB_AIPTEK is not set
    # CONFIG_USB_WACOM is not set
    # CONFIG_USB_ACECAD is not set
    # CONFIG_USB_KBTAB is not set
    # CONFIG_USB_POWERMATE is not set
    CONFIG_USB_TOUCHSCREEN=m
    CONFIG_USB_TOUCHSCREEN_EGALAX=y
    CONFIG_USB_TOUCHSCREEN_PANJIT=y
    CONFIG_USB_TOUCHSCREEN_3M=y
    CONFIG_USB_TOUCHSCREEN_ITM=y
    CONFIG_USB_TOUCHSCREEN_ETURBO=y
    CONFIG_USB_TOUCHSCREEN_GUNZE=y
    # CONFIG_USB_YEALINK is not set
    # CONFIG_USB_XPAD is not set
    CONFIG_USB_ATI_REMOTE=m
    CONFIG_USB_ATI_REMOTE2=m
    CONFIG_USB_KEYSPAN_REMOTE=m
    # CONFIG_USB_APPLETOUCH is not set

    #
    # USB Imaging devices
    #
    # CONFIG_USB_MDC800 is not set
    # CONFIG_USB_MICROTEK is not set

    #
    # USB Network Adapters
    #
    CONFIG_USB_CATC=m
    CONFIG_USB_KAWETH=m
    CONFIG_USB_PEGASUS=m
    CONFIG_USB_RTL8150=m
    CONFIG_USB_USBNET=m
    CONFIG_USB_NET_AX8817X=m
    CONFIG_USB_NET_CDCETHER=m
    CONFIG_USB_NET_GL620A=m
    CONFIG_USB_NET_NET1080=m
    CONFIG_USB_NET_PLUSB=m
    CONFIG_USB_NET_MCS7830=m
    CONFIG_USB_NET_RNDIS_HOST=m
    CONFIG_USB_NET_CDC_SUBSET=m
    CONFIG_USB_ALI_M5632=y
    CONFIG_USB_AN2720=y
    CONFIG_USB_BELKIN=y
    CONFIG_USB_ARMLINUX=y
    CONFIG_USB_EPSON2888=y
    CONFIG_USB_NET_ZAURUS=m
    CONFIG_USB_MON=y

    #
    # USB port drivers
    #

    #
    # USB Serial Converter support
    #
    CONFIG_USB_SERIAL=m
    CONFIG_USB_SERIAL_GENERIC=y
    # CONFIG_USB_SERIAL_AIRCABLE is not set
    CONFIG_USB_SERIAL_AIRPRIME=m
    CONFIG_USB_SERIAL_ARK3116=m
    CONFIG_USB_SERIAL_BELKIN=m
    CONFIG_USB_SERIAL_WHITEHEAT=m
    CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
    CONFIG_USB_SERIAL_CP2101=m
    CONFIG_USB_SERIAL_CYPRESS_M8=m
    CONFIG_USB_SERIAL_EMPEG=m
    CONFIG_USB_SERIAL_FTDI_SIO=m
    CONFIG_USB_SERIAL_FUNSOFT=m
    CONFIG_USB_SERIAL_VISOR=m
    CONFIG_USB_SERIAL_IPAQ=m
    CONFIG_USB_SERIAL_IR=m
    CONFIG_USB_SERIAL_EDGEPORT=m
    CONFIG_USB_SERIAL_EDGEPORT_TI=m
    CONFIG_USB_SERIAL_GARMIN=m
    CONFIG_USB_SERIAL_IPW=m
    CONFIG_USB_SERIAL_KEYSPAN_PDA=m
    CONFIG_USB_SERIAL_KEYSPAN=m
    # CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
    # CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
    # CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
    # CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
    # CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
    # CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
    # CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
    # CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
    # CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
    # CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
    # CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
    # CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
    CONFIG_USB_SERIAL_KLSI=m
    CONFIG_USB_SERIAL_KOBIL_SCT=m
    CONFIG_USB_SERIAL_MCT_U232=m
    CONFIG_USB_SERIAL_MOS7720=m
    CONFIG_USB_SERIAL_MOS7840=m
    CONFIG_USB_SERIAL_NAVMAN=m
    CONFIG_USB_SERIAL_PL2303=m
    CONFIG_USB_SERIAL_HP4X=m
    CONFIG_USB_SERIAL_SAFE=m
    # CONFIG_USB_SERIAL_SAFE_PADDED is not set
    CONFIG_USB_SERIAL_SIERRAWIRELESS=m
    CONFIG_USB_SERIAL_TI=m
    CONFIG_USB_SERIAL_CYBERJACK=m
    CONFIG_USB_SERIAL_XIRCOM=m
    CONFIG_USB_SERIAL_OPTION=m
    CONFIG_USB_SERIAL_OMNINET=m
    CONFIG_USB_EZUSB=y

    #
    # USB Miscellaneous drivers
    #
    CONFIG_USB_EMI62=m
    CONFIG_USB_EMI26=m
    CONFIG_USB_ADUTUX=m
    # CONFIG_USB_AUERSWALD is not set
    # CONFIG_USB_RIO500 is not set
    # CONFIG_USB_LEGOTOWER is not set
    # CONFIG_USB_LCD is not set
    # CONFIG_USB_LED is not set
    CONFIG_USB_CYPRESS_CY7C63=m
    CONFIG_USB_CYTHERM=m
    CONFIG_USB_PHIDGET=m
    CONFIG_USB_PHIDGETKIT=m
    CONFIG_USB_PHIDGETMOTORCONTROL=m
    CONFIG_USB_PHIDGETSERVO=m
    # CONFIG_USB_IDMOUSE is not set
    # CONFIG_USB_FTDI_ELAN is not set
    # CONFIG_USB_APPLEDISPLAY is not set
    CONFIG_USB_SISUSBVGA=m
    # CONFIG_USB_SISUSBVGA_CON is not set
    # CONFIG_USB_LD is not set
    # CONFIG_USB_TRANCEVIBRATOR is not set
    # CONFIG_USB_TEST is not set

    #
    # USB DSL modem support
    #

    #
    # USB Gadget Support
    #
    # CONFIG_USB_GADGET is not set

    #
    # MMC/SD Card support
    #
    # CONFIG_MMC is not set

    #
    # LED devices
    #
    # CONFIG_NEW_LEDS is not set

    #
    # LED drivers
    #

    #
    # LED Triggers
    #

    #
    # InfiniBand support
    #
    # CONFIG_INFINIBAND is not set

    #
    # EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
    #
    CONFIG_EDAC=y

    #
    # Reporting subsystems
    #
    # CONFIG_EDAC_DEBUG is not set
    CONFIG_EDAC_MM_EDAC=m
    # CONFIG_EDAC_AMD76X is not set
    CONFIG_EDAC_E7XXX=m
    CONFIG_EDAC_E752X=m
    CONFIG_EDAC_I82875P=m
    CONFIG_EDAC_I82860=m
    # CONFIG_EDAC_R82600 is not set
    CONFIG_EDAC_POLL=y

    #
    # Real Time Clock
    #
    CONFIG_RTC_LIB=m
    CONFIG_RTC_CLASS=m

    #
    # RTC interfaces
    #
    CONFIG_RTC_INTF_SYSFS=m
    CONFIG_RTC_INTF_PROC=m
    CONFIG_RTC_INTF_DEV=m
    CONFIG_RTC_INTF_DEV_UIE_EMUL=y

    #
    # RTC drivers
    #
    CONFIG_RTC_DRV_X1205=m
    CONFIG_RTC_DRV_DS1307=m
    CONFIG_RTC_DRV_DS1553=m
    CONFIG_RTC_DRV_ISL1208=m
    CONFIG_RTC_DRV_DS1672=m
    CONFIG_RTC_DRV_DS1742=m
    CONFIG_RTC_DRV_PCF8563=m
    CONFIG_RTC_DRV_PCF8583=m
    CONFIG_RTC_DRV_RS5C372=m
    CONFIG_RTC_DRV_M48T86=m
    CONFIG_RTC_DRV_TEST=m
    CONFIG_RTC_DRV_V3020=m

    #
    # DMA Engine support
    #
    CONFIG_DMA_ENGINE=y

    #
    # DMA Clients
    #
    CONFIG_NET_DMA=y

    #
    # DMA Devices
    #
    CONFIG_INTEL_IOATDMA=m

    #
    # File systems
    #
    CONFIG_EXT2_FS=m
    CONFIG_EXT2_FS_XATTR=y
    CONFIG_EXT2_FS_POSIX_ACL=y
    CONFIG_EXT2_FS_SECURITY=y
    # CONFIG_EXT2_FS_XIP is not set
    CONFIG_EXT3_FS=m
    CONFIG_EXT3_FS_XATTR=y
    CONFIG_EXT3_FS_POSIX_ACL=y
    CONFIG_EXT3_FS_SECURITY=y
    CONFIG_EXT4DEV_FS=m
    CONFIG_EXT4DEV_FS_XATTR=y
    CONFIG_EXT4DEV_FS_POSIX_ACL=y
    CONFIG_EXT4DEV_FS_SECURITY=y
    CONFIG_JBD=m
    CONFIG_JBD_DEBUG=y
    CONFIG_JBD2=m
    # CONFIG_JBD2_DEBUG is not set
    CONFIG_FS_MBCACHE=m
    CONFIG_REISERFS_FS=y
    # CONFIG_REISERFS_CHECK is not set
    # CONFIG_REISERFS_PROC_INFO is not set
    CONFIG_REISERFS_FS_XATTR=y
    CONFIG_REISERFS_FS_POSIX_ACL=y
    CONFIG_REISERFS_FS_SECURITY=y
    # CONFIG_JFS_FS is not set
    CONFIG_FS_POSIX_ACL=y
    # CONFIG_XFS_FS is not set
    # CONFIG_GFS2_FS is not set
    # CONFIG_OCFS2_FS is not set
    # CONFIG_MINIX_FS is not set
    CONFIG_ROMFS_FS=y
    CONFIG_INOTIFY=y
    CONFIG_INOTIFY_USER=y
    # CONFIG_QUOTA is not set
    CONFIG_DNOTIFY=y
    CONFIG_AUTOFS_FS=m
    CONFIG_AUTOFS4_FS=m
    # CONFIG_FUSE_FS is not set

    #
    # CD-ROM/DVD Filesystems
    #
    # CONFIG_ISO9660_FS is not set
    # CONFIG_UDF_FS is not set

    #
    # DOS/FAT/NT Filesystems
    #
    # CONFIG_MSDOS_FS is not set
    # CONFIG_VFAT_FS is not set
    # CONFIG_NTFS_FS is not set

    #
    # Pseudo filesystems
    #
    CONFIG_PROC_FS=y
    CONFIG_PROC_KCORE=y
    CONFIG_PROC_SYSCTL=y
    CONFIG_SYSFS=y
    CONFIG_TMPFS=y
    # CONFIG_TMPFS_POSIX_ACL is not set
    CONFIG_HUGETLBFS=y
    CONFIG_HUGETLB_PAGE=y
    CONFIG_RAMFS=y
    CONFIG_CONFIGFS_FS=m

    #
    # Miscellaneous filesystems
    #
    # CONFIG_ADFS_FS is not set
    # CONFIG_AFFS_FS is not set
    # CONFIG_HFS_FS is not set
    # CONFIG_HFSPLUS_FS is not set
    # CONFIG_BEFS_FS is not set
    # CONFIG_BFS_FS is not set
    # CONFIG_EFS_FS is not set
    # CONFIG_CRAMFS is not set
    # CONFIG_VXFS_FS is not set
    # CONFIG_HPFS_FS is not set
    # CONFIG_QNX4FS_FS is not set
    # CONFIG_SYSV_FS is not set
    # CONFIG_UFS_FS is not set

    #
    # Network File Systems
    #
    CONFIG_NFS_FS=y
    CONFIG_NFS_V3=y
    CONFIG_NFS_V3_ACL=y
    CONFIG_NFS_V4=y
    # CONFIG_NFS_DIRECTIO is not set
    CONFIG_NFSD=m
    CONFIG_NFSD_V3=y
    # CONFIG_NFSD_V3_ACL is not set
    # CONFIG_NFSD_V4 is not set
    CONFIG_NFSD_TCP=y
    CONFIG_ROOT_NFS=y
    CONFIG_LOCKD=y
    CONFIG_LOCKD_V4=y
    CONFIG_EXPORTFS=m
    CONFIG_NFS_ACL_SUPPORT=y
    CONFIG_NFS_COMMON=y
    CONFIG_SUNRPC=y
    CONFIG_SUNRPC_GSS=y
    CONFIG_RPCSEC_GSS_KRB5=y
    # CONFIG_RPCSEC_GSS_SPKM3 is not set
    # CONFIG_SMB_FS is not set
    # CONFIG_CIFS is not set
    # CONFIG_NCP_FS is not set
    # CONFIG_CODA_FS is not set
    # CONFIG_AFS_FS is not set
    # CONFIG_9P_FS is not set

    #
    # Partition Types
    #
    CONFIG_PARTITION_ADVANCED=y
    # CONFIG_ACORN_PARTITION is not set
    # CONFIG_OSF_PARTITION is not set
    # CONFIG_AMIGA_PARTITION is not set
    # CONFIG_ATARI_PARTITION is not set
    # CONFIG_MAC_PARTITION is not set
    CONFIG_MSDOS_PARTITION=y
    # CONFIG_BSD_DISKLABEL is not set
    # CONFIG_MINIX_SUBPARTITION is not set
    # CONFIG_SOLARIS_X86_PARTITION is not set
    # CONFIG_UNIXWARE_DISKLABEL is not set
    # CONFIG_LDM_PARTITION is not set
    # CONFIG_SGI_PARTITION is not set
    # CONFIG_ULTRIX_PARTITION is not set
    # CONFIG_SUN_PARTITION is not set
    # CONFIG_KARMA_PARTITION is not set
    # CONFIG_EFI_PARTITION is not set

    #
    # Native Language Support
    #
    CONFIG_NLS=y
    CONFIG_NLS_DEFAULT="utf8"
    CONFIG_NLS_CODEPAGE_437=m
    CONFIG_NLS_CODEPAGE_737=m
    CONFIG_NLS_CODEPAGE_775=m
    CONFIG_NLS_CODEPAGE_850=m
    CONFIG_NLS_CODEPAGE_852=m
    CONFIG_NLS_CODEPAGE_855=m
    CONFIG_NLS_CODEPAGE_857=m
    CONFIG_NLS_CODEPAGE_860=m
    CONFIG_NLS_CODEPAGE_861=m
    CONFIG_NLS_CODEPAGE_862=m
    CONFIG_NLS_CODEPAGE_863=m
    CONFIG_NLS_CODEPAGE_864=m
    CONFIG_NLS_CODEPAGE_865=m
    CONFIG_NLS_CODEPAGE_866=m
    CONFIG_NLS_CODEPAGE_869=m
    CONFIG_NLS_CODEPAGE_936=m
    CONFIG_NLS_CODEPAGE_950=m
    CONFIG_NLS_CODEPAGE_932=m
    CONFIG_NLS_CODEPAGE_949=m
    CONFIG_NLS_CODEPAGE_874=m
    CONFIG_NLS_ISO8859_8=m
    CONFIG_NLS_CODEPAGE_1250=m
    CONFIG_NLS_CODEPAGE_1251=m
    # CONFIG_NLS_ASCII is not set
    CONFIG_NLS_ISO8859_1=m
    CONFIG_NLS_ISO8859_2=m
    CONFIG_NLS_ISO8859_3=m
    CONFIG_NLS_ISO8859_4=m
    CONFIG_NLS_ISO8859_5=m
    CONFIG_NLS_ISO8859_6=m
    CONFIG_NLS_ISO8859_7=m
    CONFIG_NLS_ISO8859_9=m
    CONFIG_NLS_ISO8859_13=m
    CONFIG_NLS_ISO8859_14=m
    CONFIG_NLS_ISO8859_15=m
    CONFIG_NLS_KOI8_R=m
    CONFIG_NLS_KOI8_U=m
    CONFIG_NLS_UTF8=m

    #
    # Distributed Lock Manager
    #
    CONFIG_DLM=m
    # CONFIG_DLM_DEBUG is not set

    #
    # Instrumentation Support
    #
    # CONFIG_PROFILING is not set
    # CONFIG_KPROBES is not set

    #
    # Kernel hacking
    #
    CONFIG_TRACE_IRQFLAGS_SUPPORT=y
    # CONFIG_PRINTK_TIME is not set
    # CONFIG_ENABLE_MUST_CHECK is not set
    CONFIG_MAGIC_SYSRQ=y
    # CONFIG_UNUSED_SYMBOLS is not set
    CONFIG_DEBUG_KERNEL=y
    CONFIG_LOG_BUF_SHIFT=17
    CONFIG_DETECT_SOFTLOCKUP=y
    # CONFIG_SCHEDSTATS is not set
    # CONFIG_DEBUG_SLAB is not set
    # CONFIG_DEBUG_RT_MUTEXES is not set
    # CONFIG_RT_MUTEX_TESTER is not set
    CONFIG_DEBUG_SPINLOCK=y
    CONFIG_DEBUG_MUTEXES=y
    CONFIG_DEBUG_RWSEMS=y
    CONFIG_DEBUG_LOCK_ALLOC=y
    CONFIG_PROVE_LOCKING=y
    CONFIG_LOCKDEP=y
    # CONFIG_DEBUG_LOCKDEP is not set
    CONFIG_TRACE_IRQFLAGS=y
    CONFIG_DEBUG_SPINLOCK_SLEEP=y
    CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
    CONFIG_STACKTRACE=y
    # CONFIG_DEBUG_KOBJECT is not set
    # CONFIG_DEBUG_HIGHMEM is not set
    CONFIG_DEBUG_BUGVERBOSE=y
    # CONFIG_DEBUG_INFO is not set
    # CONFIG_DEBUG_FS is not set
    # CONFIG_DEBUG_VM is not set
    CONFIG_DEBUG_LIST=y
    # CONFIG_FRAME_POINTER is not set
    CONFIG_UNWIND_INFO=y
    CONFIG_STACK_UNWIND=y
    CONFIG_FORCED_INLINING=y
    # CONFIG_HEADERS_CHECK is not set
    # CONFIG_RCU_TORTURE_TEST is not set
    CONFIG_EARLY_PRINTK=y
    CONFIG_DEBUG_STACKOVERFLOW=y
    # CONFIG_DEBUG_STACK_USAGE is not set
    # CONFIG_DEBUG_RODATA is not set
    # CONFIG_4KSTACKS is not set
    CONFIG_X86_FIND_SMP_CONFIG=y
    CONFIG_X86_MPPARSE=y
    CONFIG_DOUBLEFAULT=y

    #
    # Security options
    #
    # CONFIG_KEYS is not set
    # CONFIG_SECURITY is not set

    #
    # Cryptographic options
    #
    CONFIG_CRYPTO=y
    CONFIG_CRYPTO_ALGAPI=y
    CONFIG_CRYPTO_BLKCIPHER=y
    CONFIG_CRYPTO_HASH=y
    CONFIG_CRYPTO_MANAGER=y
    CONFIG_CRYPTO_HMAC=y
    CONFIG_CRYPTO_NULL=m
    CONFIG_CRYPTO_MD4=m
    CONFIG_CRYPTO_MD5=y
    CONFIG_CRYPTO_SHA1=m
    CONFIG_CRYPTO_SHA256=m
    CONFIG_CRYPTO_SHA512=m
    # CONFIG_CRYPTO_WP512 is not set
    # CONFIG_CRYPTO_TGR192 is not set
    # CONFIG_CRYPTO_ECB is not set
    CONFIG_CRYPTO_CBC=y
    CONFIG_CRYPTO_DES=y
    CONFIG_CRYPTO_BLOWFISH=m
    CONFIG_CRYPTO_TWOFISH=m
    CONFIG_CRYPTO_TWOFISH_COMMON=m
    # CONFIG_CRYPTO_TWOFISH_586 is not set
    CONFIG_CRYPTO_SERPENT=m
    CONFIG_CRYPTO_AES=m
    # CONFIG_CRYPTO_AES_586 is not set
    CONFIG_CRYPTO_CAST5=m
    CONFIG_CRYPTO_CAST6=m
    # CONFIG_CRYPTO_TEA is not set
    CONFIG_CRYPTO_ARC4=m
    # CONFIG_CRYPTO_KHAZAD is not set
    # CONFIG_CRYPTO_ANUBIS is not set
    CONFIG_CRYPTO_DEFLATE=m
    CONFIG_CRYPTO_MICHAEL_MIC=m
    # CONFIG_CRYPTO_CRC32C is not set
    CONFIG_CRYPTO_TEST=m

    #
    # Hardware crypto devices
    #
    # CONFIG_CRYPTO_DEV_PADLOCK is not set

    #
    # Library routines
    #
    CONFIG_CRC_CCITT=m
    # CONFIG_CRC16 is not set
    CONFIG_CRC32=y
    # CONFIG_LIBCRC32C is not set
    CONFIG_ZLIB_INFLATE=m
    CONFIG_ZLIB_DEFLATE=m
    CONFIG_PLIST=y
    CONFIG_GENERIC_HARDIRQS=y
    CONFIG_GENERIC_IRQ_PROBE=y
    CONFIG_GENERIC_PENDING_IRQ=y
    CONFIG_X86_SMP=y
    CONFIG_X86_HT=y
    CONFIG_X86_BIOS_REBOOT=y
    CONFIG_X86_TRAMPOLINE=y
    CONFIG_KTIME_SCALAR=y
    \
     
     \ /
      Last update: 2006-10-30 15:37    [W:0.141 / U:88.676 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site