![]() | |||||||||||||
Messages in this thread |
On Tue, 2006-10-24 at 09:46 +0200, Muli Ben-Yehuda wrote: > On Mon, Oct 23, 2006 at 04:22:59PM -0700, Linus Torvalds wrote: > > > > Ok, > > a few days late, because I'm a retard and didn't think of doing a release > > when I should have. > > > > I'm also a bit grumpy, because I think people are sending me more stuff > > than they should at this stage in the game. We've been pretty good about > > keeping the later -rc releases quiet, please keep it that way. > > > > That said, it's mostly harmless cleanups and some architecture updates. > > And some of the added warnings about unused return values have caused a > > number of people to add error handling. And on the driver front, there's > > mainly new driver ID's, and a couple of new drivers. > > The genirq changes broke boot on my x86-64 x366 machine. It needs > these two patches: > > http://marc.theaimsgroup.com/?l=linux-kernel&m=116157813623508&w=2 > http://marc.theaimsgroup.com/?l=linux-kernel&m=116157837104613&w=2 Yes. Without these patches, I can't seem to get my qlogic driver to work :( Thanks, Badari ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 17 qla2xxx 0000:01:05.0: Found an ISP2200, irq 17, iobase 0xffffc20000064000 qla2xxx 0000:01:05.0: Configuring PCI space... qla2xxx 0000:01:05.0: Configure NVRAM parameters... qla2xxx 0000:01:05.0: Verifying loaded RISC code... qla2xxx 0000:01:05.0: Allocated (252 KB) for firmware dump... qla2xxx 0000:01:05.0: LIP reset occured (f723). qla2xxx 0000:01:05.0: Waiting for LIP to complete... qla2xxx 0000:01:05.0: LIP occured (f723). qla2xxx 0000:01:05.0: LOOP UP detected (1 Gbps). qla2xxx 0000:01:05.0: Topology - (Loop), Host Loop address 0x7d qla2xxx 0000:01:05.0: Failed to reserve interrupt 17 already in use. qla2xxx: probe of 0000:01:05.0 failed with error -38 ACPI: PCI Interrupt 0000:0f:01.0[A] -> GSI 29 (level, low) -> IRQ 29 qla2xxx 0000:0f:01.0: Found an ISP2312, irq 29, iobase 0xffffc20000064000 qla2xxx 0000:0f:01.0: Configuring PCI space... qla2xxx 0000:0f:01.0: Configure NVRAM parameters... qla2xxx 0000:0f:01.0: Verifying loaded RISC code... qla2xxx 0000:0f:01.0: Allocated (412 KB) for firmware dump... qla2xxx 0000:0f:01.0: Waiting for LIP to complete... qla2xxx 0000:0f:01.0: Cable is unplugged... qla2xxx 0000:0f:01.0: Failed to reserve interrupt 29 already in use. qla2xxx: probe of 0000:0f:01.0 failed with error -38 ACPI: PCI Interrupt 0000:19:01.0[A] -> GSI 37 (level, low) -> IRQ 37 qla2xxx 0000:19:01.0: Found an ISP2200, irq 37, iobase 0xffffc20000064000 qla2xxx 0000:19:01.0: Configuring PCI space... qla2xxx 0000:19:01.0: Configure NVRAM parameters... qla2xxx 0000:19:01.0: Verifying loaded RISC code... qla2xxx 0000:19:01.0: Allocated (252 KB) for firmware dump... qla2xxx 0000:19:01.0: LIP reset occured (f725). qla2xxx 0000:19:01.0: Waiting for LIP to complete... qla2xxx 0000:19:01.0: LIP occured (f725). qla2xxx 0000:19:01.0: LOOP UP detected (1 Gbps). qla2xxx 0000:19:01.0: Topology - (Loop), Host Loop address 0x8 qla2xxx 0000:19:01.0: Failed to reserve interrupt 37 already in use. qla2xxx: probe of 0000:19:01.0 failed with error -38 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/ | ||||||||||||
| Last update: 2006-10-24 20:11 [from the cache] ©2003-2008 | |||||||||||||