Messages in this thread | | | Date | Wed, 18 Oct 2006 11:31:41 +0200 | From | Helge Hafting <> | Subject | Re: [linux-usb-devel] 2.6.19-rc1-mm1 - locks when using "dd bs=1M" from card reader |
| |
Alan Stern wrote: > Verbose usb-storage debugging messages would help more > (CONFIG_USB_STORAGE_DEBUG and CONFIG_USB_DEBUG). If the kernel hangs very > badly you might need to use a serial console to capture all the logging > information. > Version information first: This is 2.6.19-rc1, not mm1. I apparently forgot to apply the mm1 patch before compiling it.
I got a BUG, which I could write down by getting X out of the way first. It is repeatable, just ask if I omitted something cruical. On bootup, the verbose debugging complains about read errors on sdc, I guess the kernel tries to get the partition table. I have no idea why there is read errors - that shouldn't hang anything though.
To bring it down:
dd if=/dev/sdc of=sdc.dump bs=1M
sd 0:0:0:2 ioctl_internal_command return code: 8000002 :Current: Sense key: Hardware Error Additional Sense: End_of_data detected cut here---- Kernel BUG at [Verbose debugging unavailable] invalid opcode: 0000 [#1] cpu:0 EIP: 0060:[<c031f823>] Not tainted VLI Eflags: 00010002 (2.6.16-rc1 #16) EIP is at start_unlink_async eax:00000000 ebx:dfe69180 ecx:e0832020 edx:00000005 esi:dffdb6bc edi:00010021 ebp:dffdb6bc esp:c0664d58 ds:007b es:007b ss:0068 Process swapper . . . stack . . . Call trace ehci_urb_dequeue unlink1 usb_hcd_unlink_urb sg_complete usb_hcd_giveback_urb qh_completions ehci_work ehci_irq usb_hcd_irq handle_IRQ_event handle_fasteoi_irq do_IRQ
Code 5d e9 8e 31 ff ff f6 43 28 01 75 b8 c7 43 24 00 00 00 00 eb af . . . <0>Kernel Panic - not syncing fatal exception in interrupt <0>Rebooting in 300 seconds
It did reboot in 300 seconds, I had to crash twice to get this much written down. I checked that stuff written down the first time was identical.
Invalid opcode suggest a compiler bug or memory scribble, or possibly calling a bad function pointer. The crash is trivial to reproduce, just ask me.
In case it matters: $ lspci 00:00.0 Host bridge: Silicon Integrated Systems [SiS] SiS645DX Host & Memory & AGP Controller 00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP) 00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS962 [MuTIOL Media IO] (rev 04) 00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller 00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] 00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0) 00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) 00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) 00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) 00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller 00:0b.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78) 00:0c.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]
Helge
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |