lkml.org 
[lkml]   [2006]   [Jan]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: 2.6.15-mm2
    Reuben Farrelly <reuben-lkml@reub.net> wrote:
    >
    > ...
    > QLogic Fibre Channel HBA Driver
    > ahci: probe of 0000:00:1f.2 failed with error -12

    It's odd that the ahci driver returned -EBUSY. Maybe this is due to "we
    have legacy mode, but all ports are unavailable" in ata_pci_init_one().

    > ata1: SATA max UDMA/133 cmd 0x0 ctl 0x2 bmdma 0x0 irq 0
    > ata2: SATA max UDMA/133 cmd 0x0 ctl 0x2 bmdma 0x8 irq 0
    > Unable to handle kernel NULL pointer dereference at virtual address 00000000
    > printing eip:
    > c0234702
    > *pde = 00000000
    > Oops: 0000 [#1]
    > SMP
    > last sysfs file:
    > Modules linked in:
    > CPU: 1
    > EIP: 0060:[<c0234702>] Not tainted VLI
    > EFLAGS: 00010206 (2.6.15-mm2)
    > EIP is at make_class_name+0x28/0x8d
    > eax: 00000000 ebx: ffffffff ecx: ffffffff edx: c19d9224
    > esi: 00000009 edi: 00000000 ebp: 00000000 esp: c1921d9c
    > ds: 007b es: 007b ss: 0068
    > Process swapper (pid: 1, threadinfo=c1921000 task=c1920a70)
    > Stack: <0>c19d9224 c03a9158 c19d9224 c03a9158 c03a9160 c0234925 c03a90e0 00000000
    > <0>00000246 c19d9224 c19d9000 c19d9030 00000002 c02349db c19d90e4 c0253218
    > <0>c19d92c0 00000000 00000000 c0276693 00000000 c0279391 c035749f c1961640
    > Call Trace:
    > [<c0234925>] class_device_del+0x9f/0x14d
    > [<c02349db>] class_device_unregister+0x8/0x10
    > [<c0253218>] scsi_remove_host+0xb8/0xf8
    > [<c0276693>] ata_host_remove+0xe/0x18
    > [<c0279391>] ata_device_add+0x2d3/0xb99
    > [<c02b6fb0>] pci_mmcfg_write+0xd3/0x103
    > [<c01eb713>] pci_bus_write_config_byte+0x4e/0x58
    > [<c02b67d3>] pcibios_set_master+0x74/0x8c
    > [<c027a2e5>] ata_pci_init_one+0x32c/0x38e
    > [<c01eb7ea>] pci_bus_read_config_word+0x62/0x6c
    > [<c01ef8bd>] pci_get_subsys+0x6c/0xe0
    > [<c027e334>] piix_init_one+0x18e/0x33a
    > [<c01ef259>] pci_device_probe+0x40/0x5b
    > [<c0233ed7>] driver_probe_device+0x35/0x98
    > [<c0234038>] __driver_attach+0x8a/0x8c
    > [<c02339a7>] bus_for_each_dev+0x39/0x57
    > [<c0233e4c>] driver_attach+0x16/0x1a
    > [<c0233fae>] __driver_attach+0x0/0x8c
    > [<c023365b>] bus_add_driver+0x6f/0x126
    > [<c01ef3f1>] __pci_register_driver+0x7d/0xac
    > [<c04023e9>] piix_init+0xc/0x1e
    > [<c01003c8>] init+0xff/0x324
    > [<c01002c9>] init+0x0/0x324
    > [<c0100d35>] kernel_thread_helper+0x5/0xb
    > Code: 89 c8 c3 55 57 56 53 83 ec 04 89 04 24 89 c2 8b 40 48 8b 38 31 ed bb ff ff
    > ff ff 89 d9 89 e8 f2 ae f7 d1 49 89 ce 8b 7a 08 89 d9 <f2> ae f7 d1 49 89 ca 8d
    > 4e 02 8d 04 0a ba d0 00 00 00 e8 22 cf

    ata_device_add() has given up, has called ata_host_remove() and then we
    presumably oopsed over incompletely initialised class stuff. It's likely
    that this oops is a second bug - a consequence of the -EBUSY.

    >
    >
    > 2. Notice above how the sky2 driver is being bailed out:
    >
    > ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 177
    > sky2 Cannot find PowerManagement capability, aborting.
    > sky2: probe of 0000:04:00.0 failed with error -5
    >
    > This has happened a number of times in the last few days, and I suspect is
    > unrelated to the oops that followed above.
    >
    > This driver worked fine in 2.6.15-rc5-mm3, and seems to work OK when built as a
    > module. But most of the time (not all the time) it doesn't like being
    > statically built in and fails with the above error. Changes to this driver have
    > been fairly small lately so I'm not sure if it's the driver or something else
    > like ACPI that is the root cause.

    Could be acpi, yes.

    Parenthetically, I wouldn't have thought that this error should be fatal
    for the driver.

    > 3. The boot up process with -mm2 was pretty lengthy, I had two periods of time
    > when the whole system just came to a crawl, first time was when starting cups,
    > and it came back to life and continued booting about 30s later. Next when
    > starting hpijs it didn't come to life at all and I had to reboot. No output to
    > the console for either, unfortunately.

    Don't know, sorry. But this kernel had oopsed, hadn't it?

    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2006-01-07 22:33    [W:4.038 / U:0.200 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site