![]() | ||||||||||
Messages in this thread |
(2) Hello. I've been attempting to figure out this problem for a long time, and have come to the conclusion that it must be a kernel bug (that or perhaps I'm a bit dense). Whenever I have the option, "Device Drivers > Plug and Play > ACPI Support" enabled, I become unable to print using my parallel port. I'm using an ASUS A8N-SLI motherboard with an AMD64 3200 chip and 1GB of RAM. I have two printers, and this happens with both. Here are some forums in which I have tried to solve this problem: http://forums.gentoo.org/viewtopic-t-416986-highlight-.html http://www.linuxquestions.org/questions/showthread.php?t=380023 (3) parallel, acpi, printing, kernel (4) Linux version 2.6.14-gentoo-r5 (root@Orchestrator) (gcc version 3.4.4 (Gentoo 3.4.4-r1, ssp-3.4.4-1.0, pie-8.7.8)) #1 Wed Jan 4 14:43:44 PST 2006 (7.1) If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes. Linux Orchestrator 2.6.14-gentoo-r5 #1 Wed Jan 4 14:43:44 PST 2006 x86_64 AMD Athlon(tm) 64 Processor 3200+ AuthenticAMD GNU/Linux Gnu C 3.4.4 Gnu make 3.80 binutils 2.16.1 util-linux 2.12r mount 2.12r module-init-tools 3.0 e2fsprogs 1.38 jfsutils 1.1.8 reiserfsprogs 3.6.19 reiser4progs line xfsprogs 2.6.25 quota-tools 3.12. PPP 2.4.2 Linux C Library 2.3.5 Dynamic linker (ldd) 2.3.5 Procps 3.2.5 Net-tools 1.60 Kbd 1.12 Sh-utils 5.2.1 udev 070 Modules Loaded parport_pc lp parport nvidia forcedeth snd_intel8x0 snd_ac97_codec snd_ac97_bus i2c_nforce2 nls_utf8 nls_iso8859_1 nls_cp437 ata_piix sata_vsc sata_sis sata_sx4 sata_nv sata_via sata_svw sata_sil sata_promise libata sbp2 ohci1394 ieee1394 ohci_hcd uhci_hcd usb_storage usbhid ehci_hcd (7.2) processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 47 model name : AMD Athlon(tm) 64 Processor 3200+ stepping : 0 cpu MHz : 2100.502 cache size : 512 KB fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm 3dnowext 3dnow pni lahf_lm bogomips : 4205.42 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts fid vid ttp tm stc (7.3) parport_pc 37864 1 - Live 0xffffffff88588000 lp 13512 0 - Live 0xffffffff88581000 parport 40588 2 parport_pc,lp, Live 0xffffffff88576000 nvidia 4856528 12 - Live 0xffffffff880d3000 forcedeth 23488 0 - Live 0xffffffff880cc000 snd_intel8x0 36896 1 - Live 0xffffffff880c1000 snd_ac97_codec 107096 1 snd_intel8x0, Live 0xffffffff880a5000 snd_ac97_bus 2880 1 snd_ac97_codec, Live 0xffffffff880a3000 i2c_nforce2 8064 0 - Live 0xffffffff880a0000 nls_utf8 2496 1 - Live 0xffffffff8809e000 nls_iso8859_1 5504 1 - Live 0xffffffff8809b000 nls_cp437 7232 1 - Live 0xffffffff88098000 ata_piix 11204 0 - Live 0xffffffff88094000 sata_vsc 9284 0 - Live 0xffffffff88090000 sata_sis 9088 0 - Live 0xffffffff8808c000 sata_sx4 14788 0 - Live 0xffffffff88087000 sata_nv 10820 0 - Live 0xffffffff88083000 sata_via 9796 0 - Live 0xffffffff8807f000 sata_svw 8964 0 - Live 0xffffffff8807b000 sata_sil 11012 0 - Live 0xffffffff88077000 sata_promise 12996 0 - Live 0xffffffff88072000 libata 51536 9 ata_piix,sata_vsc,sata_sis,sata_sx4,sata_nv,sata_via,sata_svw,sata_sil,sata_promise, Live 0xffffffff88064000 sbp2 25988 0 - Live 0xffffffff8805c000 ohci1394 34252 0 - Live 0xffffffff88052000 ieee1394 105976 2 sbp2,ohci1394, Live 0xffffffff88037000 ohci_hcd 21252 0 - Live 0xffffffff88030000 uhci_hcd 32736 0 - Live 0xffffffff88027000 usb_storage 69504 0 - Live 0xffffffff88015000 usbhid 39264 0 - Live 0xffffffff8800a000 ehci_hcd 34248 0 - Live 0xffffffff88000000 (7.4) 0000-001f : dma1 0020-0021 : pic1 0040-0043 : timer0 0050-0053 : timer1 0060-006f : keyboard 0070-0077 : rtc 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 0376-0376 : ide1 0378-037a : parport0 03c0-03df : vesafb 03f6-03f6 : ide0 03f8-03ff : serial 0960-0967 : 0000:00:08.0 0960-0967 : sata_nv 0970-0977 : 0000:00:07.0 0970-0977 : sata_nv 09e0-09e7 : 0000:00:08.0 09e0-09e7 : sata_nv 09f0-09f7 : 0000:00:07.0 09f0-09f7 : sata_nv 0b60-0b63 : 0000:00:08.0 0b60-0b63 : sata_nv 0b70-0b73 : 0000:00:07.0 0b70-0b73 : sata_nv 0be0-0be3 : 0000:00:08.0 0be0-0be3 : sata_nv 0bf0-0bf3 : 0000:00:07.0 0bf0-0bf3 : sata_nv 0cf8-0cff : PCI conf1 4000-407f : motherboard 4000-4003 : PM1a_EVT_BLK 4004-4005 : PM1a_CNT_BLK 4008-400b : PM_TMR 401c-401c : PM2_CNT_BLK 4020-4027 : GPE0_BLK 4080-40ff : motherboard 4400-447f : motherboard 4480-44ff : motherboard 44a0-44af : GPE1_BLK 4800-487f : motherboard 4880-48ff : motherboard 4c00-4c3f : 0000:00:01.1 4c00-4c07 : nForce2 SMBus 4c40-4c7f : 0000:00:01.1 4c40-4c47 : nForce2 SMBus 9000-afff : PCI Bus #05 9000-9007 : 0000:05:06.0 9000-9007 : ide2 9400-9403 : 0000:05:06.0 9402-9402 : ide2 9800-9807 : 0000:05:06.0 9c00-9c03 : 0000:05:06.0 a000-a00f : 0000:05:06.0 a000-a007 : ide2 a008-a00f : ide3 a400-a407 : 0000:05:07.0 a400-a407 : serial b000-b007 : 0000:00:0a.0 b000-b007 : forcedeth c400-c40f : 0000:00:08.0 c400-c40f : sata_nv d800-d80f : 0000:00:07.0 d800-d80f : sata_nv dc00-dcff : 0000:00:04.0 dc00-dcff : NVidia CK804 e000-e0ff : 0000:00:04.0 e000-e0ff : NVidia CK804 e400-e41f : 0000:00:01.1 f000-f00f : 0000:00:06.0 f000-f007 : ide0 f008-f00f : ide1 00000000-0009e7ff : System RAM 0009e800-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000d4000-000d67ff : Adapter ROM 000f0000-000fffff : System ROM 00100000-3ffeffff : System RAM 00100000-0046e96b : Kernel code 0046e96c-0059922f : Kernel data 3fff0000-3fff2fff : ACPI Non-volatile Storage 3fff3000-3fffffff : ACPI Tables 50000000-500fffff : PCI Bus #05 50000000-50003fff : 0000:05:06.0 c0000000-c7ffffff : PCI Bus #01 c0000000-c7ffffff : 0000:01:00.0 c0000000-c7ffffff : vesafb c8000000-cfffffff : PCI Bus #01 c8000000-cbffffff : 0000:01:00.0 c8000000-cbffffff : nvidia cc000000-ccffffff : 0000:01:00.0 cd000000-cd01ffff : 0000:01:00.0 d0000000-d1ffffff : PCI Bus #05 d1000000-d1003fff : 0000:05:06.0 d1004000-d1007fff : 0000:05:0b.0 d1008000-d10087ff : 0000:05:0b.0 d1008000-d10087ff : ohci1394 d2000000-d2000fff : 0000:00:0a.0 d2000000-d2000fff : forcedeth d2001000-d2001fff : 0000:00:08.0 d2001000-d2001fff : sata_nv d2002000-d2002fff : 0000:00:07.0 d2002000-d2002fff : sata_nv d2003000-d2003fff : 0000:00:04.0 d2003000-d2003fff : NVidia CK804 d2004000-d2004fff : 0000:00:02.0 d2004000-d2004fff : ohci_hcd e0000000-efffffff : reserved feb00000-feb000ff : 0000:00:02.1 feb00000-feb000ff : ehci_hcd fec00000-ffffffff : reserved (7.5) 0000:00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3) Subsystem: ASUSTeK Computer Inc.: Unknown device 815a Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: [44] #08 [01e0] Capabilities: [e0] #08 [a801] 0000:00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3) Subsystem: ASUSTeK Computer Inc. K8N4-E Mainboard Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 0000:00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2) Subsystem: ASUSTeK Computer Inc. K8N4-E Mainboard Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 255 Region 0: I/O ports at e400 Region 4: I/O ports at 4c00 [size=64] Region 5: I/O ports at 4c40 [size=64] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. K8N4-E Mainboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 19 Region 0: Memory at d2004000 (32-bit, non-prefetchable) Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. K8N4-E Mainboard Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (750ns min, 250ns max) Interrupt: pin B routed to IRQ 18 Region 0: Memory at feb00000 (32-bit, non-prefetchable) Capabilities: [44] #0a [2098] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:04.0 Multimedia audio controller: nVidia Corporation CK804 AC'97 Audio Controller (rev a2) Subsystem: ASUSTeK Computer Inc. K8N4-E Mainboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (500ns min, 1250ns max) Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at dc00 Region 1: I/O ports at e000 [size=256] Region 2: Memory at d2003000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f2) (prog-if 8a [Master SecP PriP]) Subsystem: ASUSTeK Computer Inc. K8N4-E Mainboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (750ns min, 250ns max) Region 4: I/O ports at f000 [size=16] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3) (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc.: Unknown device 815a Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 20 Region 0: I/O ports at 09f0 Region 1: I/O ports at 0bf0 [size=4] Region 2: I/O ports at 0970 [size=8] Region 3: I/O ports at 0b70 [size=4] Region 4: I/O ports at d800 [size=16] Region 5: Memory at d2002000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3) (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. K8N4-E Mainboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 21 Region 0: I/O ports at 09e0 Region 1: I/O ports at 0be0 [size=4] Region 2: I/O ports at 0960 [size=8] Region 3: I/O ports at 0b60 [size=4] Region 4: I/O ports at c400 [size=16] Region 5: Memory at d2001000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=128 I/O behind bridge: 00009000-0000afff Memory behind bridge: d0000000-d1ffffff Prefetchable memory behind bridge: 50000000-500fffff Expansion ROM at 00009000 [disabled] [size=8K] BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- 0000:00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3) Subsystem: ASUSTeK Computer Inc. K8N4-E Mainboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (250ns min, 5000ns max) Interrupt: pin A routed to IRQ 19 Region 0: Memory at d2000000 (32-bit, non-prefetchable) Region 1: I/O ports at b000 [size=8] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable+ DSel=0 DScale=0 PME- 0000:00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, cache line size 08 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-0000000000000000 BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [58] #08 [a800] Capabilities: [80] #10 [0141] 0000:00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, cache line size 08 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-0000000000000000 BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [58] #08 [a800] Capabilities: [80] #10 [0141] 0000:00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, cache line size 08 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-0000000000000000 BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [58] #08 [a800] Capabilities: [80] #10 [0141] 0000:00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, cache line size 08 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: c8000000-cfffffff Prefetchable memory behind bridge: 00000000c0000000-00000000c7f00000 BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [58] #08 [a800] Capabilities: [80] #10 [0141] 0000:01:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600 GT] (rev a2) (prog-if 00 [VGA]) Subsystem: Giga-byte Technology: Unknown device 3125 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 22 Region 0: Memory at c8000000 (32-bit, non-prefetchable) [size=cd000000] Region 1: Memory at c0000000 (64-bit, prefetchable) [size=128M] Region 3: Memory at cc000000 (64-bit, non-prefetchable) [size=16M] Expansion ROM at 00020000 [disabled] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [68] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [78] #10 [0001] 0000:05:06.0 Mass storage controller: Promise Technology, Inc. 20269 (rev 02) (prog-if 85) Subsystem: Promise Technology, Inc. Ultra133TX2 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (1000ns min, 4500ns max), cache line size 08 Interrupt: pin A routed to IRQ 17 Region 0: I/O ports at 9000 [size=1280M] Region 1: I/O ports at 9400 [size=4] Region 2: I/O ports at 9800 [size=8] Region 3: I/O ports at 9c00 [size=4] Region 4: I/O ports at a000 [size=16] Region 5: Memory at d1000000 (32-bit, non-prefetchable) [size=16K] Expansion ROM at 00004000 [disabled] Capabilities: [60] Power Management version 1 Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:05:07.0 Serial controller: 3Com Corp, Modem Division 56K FaxModem Model 5610 (rev 01) (prog-if 02 [16550]) Subsystem: 3Com Corp, Modem Division: Unknown device 00d3 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at a400 Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0+,D1-,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=2 PME- 0000:05:0b.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. K8N4-E Mainboard Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (500ns min, 1000ns max), cache line size 08 Interrupt: pin A routed to IRQ 17 Region 0: Memory at d1008000 (32-bit, non-prefetchable) Region 1: Memory at d1004000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME+ (7.6) (no scsi) I hope this helps! --Dane P.S. Please let me know if this turns out to be something fixable short of a kernel modification! - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/ | |||||||||
| Last update: 2006-01-05 06:06 [from the cache] ©2003-2008 | ||||||||||