lkml.org 
[lkml]   [2006]   [Jan]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: vesa fb is slow on 2.6.15.1
    > >
    > > But anyway, do you have a clue why do I still get this error?
    > > PCI: Failed to allocate mem resource #6:20000@f8000000 for 0000:40:00.0
    > > I've several workstations with _exactly_ the same hardware. I've tried
    > > two of them - both give the error with 2.6.15.1 (and no errors with
    > > 2.6.11.12).
    >
    > Can you post the entire dmesg?
    >
    > Tony
    >

    Attached.

    Thanks.
    --
    Zaar
    Linux version 2.6.15.1 (root@localhost) (gcc version 3.4.3) #1 SMP PREEMPT Fri Jan 27 13:26:34 IST 2006
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
    BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 00000000dfff5000 (usable)
    BIOS-e820: 00000000dfff5000 - 00000000e0000000 (reserved)
    BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
    2687MB HIGHMEM available.
    896MB LOWMEM available.
    found SMP MP-table at 000f9bf0
    On node 0 totalpages: 917493
    DMA zone: 4096 pages, LIFO batch:0
    DMA32 zone: 0 pages, LIFO batch:0
    Normal zone: 225280 pages, LIFO batch:31
    HighMem zone: 688117 pages, LIFO batch:31
    DMI 2.3 present.
    ACPI: RSDP (v002 COMPAQ ) @ 0x000e8e10
    ACPI: XSDT (v001 COMPAQ CPQ0063 0x20050602 0x00000000) @ 0xdfff50ec
    ACPI: FADT (v003 COMPAQ TUMWATER 0x00000001 0x00000000) @ 0xdfff52ac
    ACPI: SSDT (v001 COMPAQ PROJECT 0x00000001 MSFT 0x0100000e) @ 0xdfff657a
    ACPI: MADT (v001 COMPAQ TUMWATER 0x00000001 0x00000000) @ 0xdfff53b8
    ACPI: ASF! (v032 COMPAQ TUMWATER 0x00000001 0x00000000) @ 0xdfff543c
    ACPI: MCFG (v001 COMPAQ TUMWATER 0x00000001 0x00000000) @ 0xdfff54a6
    ACPI: DSDT (v001 COMPAQ DSDT 0x00000001 MSFT 0x0100000e) @ 0x00000000
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Processor #0 15:4 APIC version 20
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled)
    Processor #6 15:4 APIC version 20
    ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
    Processor #1 15:4 APIC version 20
    ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled)
    Processor #7 15:4 APIC version 20
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
    ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Enabling APIC mode: Flat. Using 1 I/O APICs
    Using ACPI (MADT) for SMP configuration information
    Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000)
    Built 1 zonelists
    Kernel command line: quiet selinux=0 vga=795 video=vesafb:mtrr:3,ywrap
    mapped APIC to ffffd000 (fee00000)
    mapped IOAPIC to ffffc000 (fec00000)
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 65536 bytes)
    Detected 3601.544 MHz processor.
    Using tsc for high-res timesource
    Console: colour dummy device 80x25
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 3624808k/3669972k available (1949k kernel code, 43888k reserved, 588k data, 208k init, 2752468k highmem)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Calibrating delay using timer specific routine.. 7206.77 BogoMIPS (lpj=3603389)
    Security Framework v1.0.0 initialized
    SELinux: Disabled at boot.
    Mount-cache hash table entries: 512
    CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000659d 00000000 00000000
    CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 0000659d 00000000 00000000
    monitor/mwait feature present.
    using mwait in idle threads.
    CPU: Trace cache: 12K uops, L1 D cache: 16K
    CPU: L2 cache: 1024K
    CPU: Physical Processor ID: 0
    CPU: After all inits, caps: bfebfbff 20000000 00000000 00000080 0000659d 00000000 00000000
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
    CPU0: Thermal monitoring enabled
    mtrr: v2.0 (20020519)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Checking 'hlt' instruction... OK.
    CPU0: Intel(R) Xeon(TM) CPU 3.60GHz stepping 01
    Booting processor 1/1 eip 3000
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 7199.36 BogoMIPS (lpj=3599683)
    CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000659d 00000000 00000000
    CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 0000659d 00000000 00000000
    monitor/mwait feature present.
    CPU: Trace cache: 12K uops, L1 D cache: 16K
    CPU: L2 cache: 1024K
    CPU: Physical Processor ID: 0
    CPU: After all inits, caps: bfebfbff 20000000 00000000 00000080 0000659d 00000000 00000000
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#1.
    CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
    CPU1: Thermal monitoring enabled
    CPU1: Intel(R) Xeon(TM) CPU 3.60GHz stepping 01
    Booting processor 2/6 eip 3000
    Initializing CPU#2
    Calibrating delay using timer specific routine.. 7199.34 BogoMIPS (lpj=3599673)
    CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000659d 00000000 00000000
    CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 0000659d 00000000 00000000
    monitor/mwait feature present.
    CPU: Trace cache: 12K uops, L1 D cache: 16K
    CPU: L2 cache: 1024K
    CPU: Physical Processor ID: 3
    CPU: After all inits, caps: bfebfbff 20000000 00000000 00000080 0000659d 00000000 00000000
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#2.
    CPU2: Intel P4/Xeon Extended MCE MSRs (24) available
    CPU2: Thermal monitoring enabled
    CPU2: Intel(R) Xeon(TM) CPU 3.60GHz stepping 01
    Booting processor 3/7 eip 3000
    Initializing CPU#3
    Calibrating delay using timer specific routine.. 7199.38 BogoMIPS (lpj=3599694)
    CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000659d 00000000 00000000
    CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 0000659d 00000000 00000000
    monitor/mwait feature present.
    CPU: Trace cache: 12K uops, L1 D cache: 16K
    CPU: L2 cache: 1024K
    CPU: Physical Processor ID: 3
    CPU: After all inits, caps: bfebfbff 20000000 00000000 00000080 0000659d 00000000 00000000
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#3.
    CPU3: Intel P4/Xeon Extended MCE MSRs (24) available
    CPU3: Thermal monitoring enabled
    CPU3: Intel(R) Xeon(TM) CPU 3.60GHz stepping 01
    Total of 4 processors activated (28804.87 BogoMIPS).
    ENABLING IO-APIC IRQs
    ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
    checking TSC synchronization across 4 CPUs: passed.
    Brought up 4 CPUs
    checking if image is initramfs... it is
    Freeing initrd memory: 7166k freed
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.20 entry at 0xeb5df, last bus=64
    PCI: Using MMCONFIG
    ACPI: Subsystem revision 20050902
    ACPI: Interpreter enabled
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 14 15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 14 15)
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: Probing PCI hardware (bus 00)
    ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
    PCI quirk: region f800-f87f claimed by ICH4 ACPI/GPIO/TCO
    PCI quirk: region fa00-fa3f claimed by ICH4 GPIO
    PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
    Boot video device is 0000:40:00.0
    PCI: Transparent bridge - 0000:00:1e.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XPA_._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XPB_._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XPA1._PRT]
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    pnp: PnP ACPI: found 15 devices
    usbcore: registered new driver usbfs
    usbcore: registered new driver hub
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
    pnp: 00:0a: ioport range 0xcb0-0xcbf has been reserved
    pnp: 00:0a: ioport range 0x4d0-0x4d1 has been reserved
    pnp: 00:0b: ioport range 0x400-0x41f has been reserved
    pnp: 00:0b: ioport range 0x420-0x43f has been reserved
    pnp: 00:0b: ioport range 0x440-0x45f has been reserved
    pnp: 00:0b: ioport range 0x460-0x47f could not be reserved
    pnp: 00:0b: ioport range 0x480-0x48f has been reserved
    pnp: 00:0b: ioport range 0xf800-0xf81f could not be reserved
    pnp: 00:0b: ioport range 0xf820-0xf83f has been reserved
    pnp: 00:0b: ioport range 0xf840-0xf85f has been reserved
    PCI: Bridge: 0000:00:02.0
    IO window: disabled.
    MEM window: fa100000-fa1fffff
    PREFETCH window: e2000000-e20fffff
    PCI: Bridge: 0000:00:03.0
    IO window: disabled.
    MEM window: fa200000-fa2fffff
    PREFETCH window: disabled.
    PCI: Failed to allocate mem resource #6:20000@f8000000 for 0000:40:00.0
    PCI: Bridge: 0000:00:04.0
    IO window: disabled.
    MEM window: f8000000-f9ffffff
    PREFETCH window: f0000000-f7ffffff
    PCI: Bridge: 0000:00:1e.0
    IO window: 3000-3fff
    MEM window: fa000000-fa0fffff
    PREFETCH window: e2100000-e21fffff
    ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169
    PCI: Setting latency timer of device 0000:00:02.0 to 64
    ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 169
    PCI: Setting latency timer of device 0000:00:03.0 to 64
    ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 169
    PCI: Setting latency timer of device 0000:00:04.0 to 64
    PCI: Setting latency timer of device 0000:00:1e.0 to 64
    Machine check exception polling timer started.
    audit: initializing netlink socket (disabled)
    audit(1138378882.362:1): initialized
    highmem bounce pool size: 64 pages
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    Initializing Cryptographic API
    io scheduler noop registered
    ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169
    PCI: Setting latency timer of device 0000:00:02.0 to 64
    Allocate Port Service[pcie00]
    Allocate Port Service[pcie01]
    ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 169
    PCI: Setting latency timer of device 0000:00:03.0 to 64
    Allocate Port Service[pcie00]
    Allocate Port Service[pcie01]
    ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 169
    PCI: Setting latency timer of device 0000:00:04.0 to 64
    Allocate Port Service[pcie00]
    Allocate Port Service[pcie01]
    vesafb: framebuffer at 0xf0000000, mapped to 0xf8880000, using 10240k, total 131072k
    vesafb: mode is 1280x1024x32, linelength=5120, pages=0
    vesafb: protected mode interface info at 00ff:44f0
    vesafb: scrolling: redraw
    vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    vesafb: Mode is VGA compatible
    Console: switching to colour frame buffer device 160x64
    fb0: VESA VGA frame buffer device
    PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
    serio: i8042 AUX port at 0x60,0x64 irq 12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
    usbmon: debugfs is not available
    ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 177
    PCI: Setting latency timer of device 0000:00:1d.7 to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: debug port 1
    PCI: cache line size of 128 is not supported by device 0000:00:1d.7
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:1d.7: irq 177, io mem 0xfa300000
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 8 ports detected
    ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
    USB Universal Host Controller Interface driver v2.3
    ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
    PCI: Setting latency timer of device 0000:00:1d.0 to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1d.0: irq 169, io base 0x00004440
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 185
    PCI: Setting latency timer of device 0000:00:1d.1 to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1d.1: irq 185, io base 0x00004460
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 193
    PCI: Setting latency timer of device 0000:00:1d.2 to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1d.2: irq 193, io base 0x00004480
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 169
    PCI: Setting latency timer of device 0000:00:1d.3 to 64
    uhci_hcd 0000:00:1d.3: UHCI Host Controller
    uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:1d.3: irq 169, io base 0x000044a0
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    usb 4-1: new full speed USB device using uhci_hcd and address 2
    hub 4-1:1.0: USB hub found
    hub 4-1:1.0: 4 ports detected
    usbcore: registered new driver hiddev
    usbcore: registered new driver usbhid
    drivers/usb/input/hid-core.c: v2.6:USB HID core driver
    mice: PS/2 mouse device common for all mice
    NET: Registered protocol family 2
    IP route cache hash table entries: 131072 (order: 7, 524288 bytes)
    TCP established hash table entries: 262144 (order: 9, 3145728 bytes)
    TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
    TCP: Hash tables configured (established 262144 bind 65536)
    TCP reno registered
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    Starting balanced_irq
    Using IPI No-Shortcut mode
    ACPI wakeup devices:
    PCI0 XPA SLO4 XPB SLO2 HUB COM1 USB1 USB2 USB3 USB4 EUSB NIC PBTN
    ACPI: (supports S0 S1 S3 S4 S5)
    Freeing unused kernel memory: 208k freed
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    SCSI subsystem initialized
    libata version 1.20 loaded.
    ata_piix 0000:00:1f.2: version 1.05
    ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 193
    PCI: Setting latency timer of device 0000:00:1f.2 to 64
    ata1: SATA max UDMA/133 cmd 0x4810 ctl 0x482A bmdma 0x44F0 irq 193
    ata2: SATA max UDMA/133 cmd 0x4818 ctl 0x482E bmdma 0x44F8 irq 193
    ICH5: IDE controller at PCI slot 0000:00:1f.1
    PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
    ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 193
    ICH5: chipset revision 2
    ICH5: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x44e0-0x44e7, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0x44e8-0x44ef, BIOS settings: hdc:DMA, hdd:DMA
    Probing IDE interface ide0...
    Fusion MPT base driver 3.03.04
    Copyright (c) 1999-2005 LSI Logic Corporation
    Fusion MPT SPI Host driver 3.03.04
    usb 4-1.1: new low speed USB device using uhci_hcd and address 3
    ata1: dev 0 cfg 49:2f00 82:3069 83:7d01 84:4023 85:3069 86:3401 87:4023 88:203f
    ata1: dev 0 ATA-7, max UDMA/100, 78165360 sectors: LBA48
    ata1: dev 0 configured for UDMA/100
    scsi0 : ata_piix
    ata2: SATA port has no device.
    scsi1 : ata_piix
    Vendor: ATA Model: ST340014AS Rev: 3.43
    Type: Direct-Access ANSI SCSI revision: 05
    input: Microsoft Natural Keyboard Pro as /class/input/input0
    input: USB HID v1.10 Keyboard [Microsoft Natural Keyboard Pro] on usb-0000:00:1d.2-1.1
    input: Microsoft Natural Keyboard Pro as /class/input/input1
    input: USB HID v1.10 Device [Microsoft Natural Keyboard Pro] on usb-0000:00:1d.2-1.1
    usb 4-1.2: new low speed USB device using uhci_hcd and address 4
    Probing IDE interface ide1...
    input: Microsoft Microsoft IntelliMouse® Explorer as /class/input/input2
    input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Explorer] on usb-0000:00:1d.2-1.2
    usbcore: registered new driver yealink
    drivers/usb/input/yealink.c: Yealink phone driver:yld-20050816
    hdc: HL-DT-STDVD-ROM GDR8163B, ATAPI CD/DVD-ROM drive
    hdd: Maxtor 2B020H1, ATA DISK drive
    ide1 at 0x170-0x177,0x376 on irq 15
    hdd: max request size: 128KiB
    hdd: 40020624 sectors (20490 MB) w/2048KiB Cache, CHS=39703/16/63, UDMA(100)
    hdd: cache flushes not supported
    hdd: hdd1
    ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 18 (level, low) -> IRQ 193
    mptbase: Initiating ioc0 bringup
    ioc0: 53C1030: Capabilities={Initiator}
    scsi2 : ioc0: LSI53C1030, FwRev=01032500h, Ports=1, MaxQ=222, IRQ=193
    SCSI device sda: 78165360 512-byte hdwr sectors (40021 MB)
    SCSI device sda: drive cache: write back
    SCSI device sda: 78165360 512-byte hdwr sectors (40021 MB)
    SCSI device sda: drive cache: write back
    sda: sda1 sda2 sda3
    sd 0:0:0:0: Attached scsi disk sda
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    Floppy drive(s): fd0 is 1.44M
    FDC 0 is a post-1991 82077
    EXT3 FS on hdd1, internal journal
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    IPv6 over IPv4 tunneling driver
    \
     
     \ /
      Last update: 2006-01-27 17:35    [W:0.048 / U:1.132 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site