lkml.org 
[lkml]   [2006]   [Jan]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: IPMI BMC + MSI K1-1000S with tg3 and networking failure
On Tue, 17 Jan 2006, Martin Drab wrote:

> Hi,
>
> does anyone here happen to have any experience with using the IPMI 1.5 BMC
> with Linux? I have a MSI K1-1000S server with Broadcom Tigon3 dual GLAN
> and a MS-9549 BMC server management card. I tried to enable the IPMI
> remote management functionality over the shared LAN. I've succeeded using
> the ipmitools, the remote managing works quite well.
>
> But as I did this, the ordinary network communication in Linux stopped
> working. Some packets seem to flow both ways if I try to communicate, but
> nothing seems to happen. If I try simple ping from inside to outside, it
> does mostly nothing, from time to time I get about 2 or 3 responses in
> about 10 minute period, so that means that it is not completely dead, but
> somehow the packets are either mostly blocked by the BMC or worse, altered
> by the BMC. (If I read the IPMI 1.5 spec correctly, the BMC should be
> almost completely transparent to the remaining network packet stream.)
> And when I try to access the server from outside, I get only to the BMC as
> expected, but when I try for instance the ssh access, I get a "Connection
> refused", though sshd is running properly.
>
> No matter what configuration I try to set on the BMC, I cannot revert the
> behaviour. Before I managed to set the BMC configuration for the first
> time, everything worked as expected (without the remote server management
> functionality of course). Currently the only way I managed to make the
> ordinary Linux networking to work is to physically remove the BMC card
> (which of course results in no sensors, no fan control, etc.).
>
> This leads me to a question. Isn't there some extra setting that the
> tg3 driver has to do to cooperate with the BMC to share the ethernet
> connection? (Perhaps the driver is not ready for such a cooperation?) Or
> is there some extra trick that I have to set on the BMC to make it work
> correctly with the other traffic?

OK, I've finally seem to have found the answer. The MAC and IP address of
the BMC card HAS TO BE DIFFERENT than the one of the ordinary LAN, though
sharing the same chip, wire etc. Now it's working. :)

The text of the IPMI 1.5 standard got me thinking they need to be the same
and that the differentiation is made only by the destination port (623 for
BMC, others for OS), but that was wrong. :(

Martin
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-01-17 22:11    [W:0.076 / U:24.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site