lkml.org 
[lkml]   [2006]   [Jan]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: BTTV broken on recent kernels
Lee Revell wrote:

>On Sun, 2006-01-15 at 19:05 -0700, Bob Gill wrote:
>
>
>>Hi. The last several kernel versions have led to broken bttv (up to 4
>>or 5 kernel versions ago, I could watch tv on either mplayer or xawtv),
>>but lately bttv is broken. My card is an 'bt878 compatible built by ATI
>>(ATI TV Wonder VE). I'm pretty certain it worked as late as
>>2.6.14-git7.
>>
>>
>
>You need to do a git bisect (check the list archives) to isolate the
>change that broke it.
>
>Lee
>
>
>
>
OK. I will, but I will add a tiny bit of additional info first.
dmesg shows bttv loading up like this:
Linux video capture interface: v1.00
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKD] -> GSI 5 (level, low)
-> IRQ
5
bttv0: Bt878 (rev 2) at 0000:00:0b.0, irq: 5, latency: 32, mmio: 0xeb003000
bttv0: detected: ATI TV Wonder/VE [card=64], PCI subsystem ID is 1002:0003
bttv0: using: ATI TV-Wonder VE [card=64,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
bttv0: using tuner=19
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: i2c: checking for TDA9887 @ 0x86... not found
tuner 0-0060: All bytes are equal. It is not a TEA5767
tuner 0-0060: chip found @ 0xc0 (bt878 #0 [sw])
tuner 0-0060: type set to 19 (Temic PAL* auto (4006 FN5))
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
Real Time Clock Driver v1.12ac
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
.....and when trying to tune audio comes in, but dmsg shows video giving:
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
bttv0: PLL can sleep, using XTAL (28636363).
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: PLL can sleep, using XTAL (28636363).
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: PLL can sleep, using XTAL (28636363).
bttv0: SCERR @ 348ec014,bits: HSYNC OFLOW FBUS SCERR*
bttv0: SCERR @ 348ec000,bits: OFLOW FBUS SCERR*
.... I will do the git bisect and reply in a bit.
Thanks for your reply,
Bob
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-01-16 03:46    [W:0.205 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site