lkml.org 
[lkml]   [2005]   [Sep]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [GIT PATCH] W1 patches for 2.6.13
On Fri, Sep 09, 2005 at 09:08:25AM +0400, Evgeniy Polyakov wrote:
> On Thu, Sep 08, 2005 at 08:30:36PM -0700, Greg KH (gregkh@suse.de) wrote:
> > On Fri, Sep 09, 2005 at 01:30:09AM +0200, Marcel Holtmann wrote:
> > > Hi Greg,
> > >
> > > > Here are some w1 patches that have been in the -mm tree for a while.
> > > > They add a new driver, and fix up the netlink logic a lot. They also
> > > > add a crc16 implementation that is needed.
> > >
> > > adding the CRC-16 is very cool. I was just about to submit one by my
> > > own, because it is also needed for the Bluetooth L2CAP retransmission
> > > and flow control support.
> > >
> > > What about the 1-Wire notes inside the CRC-16 code. This suppose to be
> > > generic code and so this doesn't belong there.
> >
> > Yes, those comments don't belong there. Evgeniy, want to fix this?
>
> No problem. Patch attached.
>
> > thanks,
> >
> > greg k-h
>
> Remove w1 specific comments from generic crc16 implementation.
>
> Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
>
> diff --git a/include/linux/crc16.h b/include/linux/crc16.h
> --- a/include/linux/crc16.h
> +++ b/include/linux/crc16.h
> @@ -1,22 +1,11 @@
> /*
> * crc16.h - CRC-16 routine
> *
> - * Implements the standard CRC-16, as used with 1-wire devices:
> + * Implements the standard CRC-16:
> * Width 16
> * Poly 0x8005 (x^16 + x^15 + x^2 + 1)
> * Init 0
> *
> - * For 1-wire devices, the CRC is stored inverted, LSB-first
> - *
> - * Example buffer with the CRC attached:
> - * 31 32 33 34 35 36 37 38 39 C2 44
> - *
> - * The CRC over a buffer with the CRC attached is 0xB001.
> - * So, if (crc16(0, buf, size) == 0xB001) then the buffer is valid.
> - *
> - * Refer to "Application Note 937: Book of iButton Standards" for details.
> - * http://www.maxim-ic.com/appnotes.cfm/appnote_number/937
> - *
> * Copyright (c) 2005 Ben Gardner <bgardner@wabtec.com>
> *
> * This source code is licensed under the GNU General Public License,
> @@ -28,9 +17,6 @@
>
> #include <linux/types.h>
>
> -#define CRC16_INIT 0
> -#define CRC16_VALID 0xb001
> -

This breaks your w1 code:
CC [M] drivers/w1/w1_ds2433.o
drivers/w1/w1_ds2433.c: In function `w1_f23_refresh_block':
drivers/w1/w1_ds2433.c:84: error: `CRC16_INIT' undeclared (first use in this function)
drivers/w1/w1_ds2433.c:84: error: (Each undeclared identifier is reported only once
drivers/w1/w1_ds2433.c:84: error: for each function it appears in.)
drivers/w1/w1_ds2433.c:84: error: `CRC16_VALID' undeclared (first use in this function)
drivers/w1/w1_ds2433.c: In function `w1_f23_write_bin':
drivers/w1/w1_ds2433.c:224: error: `CRC16_INIT' undeclared (first use in this function)
drivers/w1/w1_ds2433.c:224: error: `CRC16_VALID' undeclared (first use in this function)


So I'm not going to apply this :(

thanks,

greg k-h
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-09-09 23:41    [W:0.051 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site