lkml.org 
[lkml]   [2005]   [Sep]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: can't boot 2.6.13
Date
On Thursday, September 08, 2005 3:19 PM, Mike Miller(HP) wrote:
> I am not able to boot the 2.6.13 version of the kernel. I've
> tried different systems, tried downloading again, still
> nothing. Here's the last thing I see from the serial port:
>
> md: Autodetecting RAID arrays.
> md: autorun ...
> md: ... autorun DONE.
> RAMDISK: Compressed image found at block 0
> input: AT Translated Set 2 keyboard on isa0060/serio0
> VFS: Mounted root (ext2 filesystem).
> logips2pp: Detected unknown logitech mouse model 1
> input: PS/2 Logitech Mouse on isa0060/serio1
> SCSI subsystem initialized
> Fusion MPT base driver 3.03.02
> Copyright (c) 1999-2005 LSI Logic Corporation
>

We introduced split drivers for 2.6.13. There are new layer drivers
that sit ontop of mptscsih.ko. These drivers are split along bus
protocal, so there is mptspi.ko, mptfc.ko, and mptsas.ko. This is
to tie into the scsi transport layers that are split the same.

For 1030(a SPI controller)
If your using RedHat, you need to change mptscish to mptspi in
/etc/modprobe.conf.
If your using SuSE, you need to change mptscish to mptspi in
/etc/sysconfig/kernel

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-09-09 00:55    [W:0.536 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site