lkml.org 
[lkml]   [2005]   [Sep]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Promise SATAII 150 TX (PDC 20579) & PATA/SATA port problem
On  2005-09-06 at 12:51:47, you wrote:

>Hi,
>
>I'm using the linux 2.6.13 (from www.linux-mips.org) containing the
>libata patch (2.6.13-rc7-libata1.patch.bz2) on an AMD DBAu1550 (mips32).
>I've connected a HDD to the pata port of my PDC 20579 controller.
>Unfortunately, it doesn't work. Here a part of the boot messages:

[snip]

>I've try to connect a HDD on a SATA port and the problem still appears
>:(. More when I try the 2.6.10 kernel with the corresponding libata
>patch it, works !
>
>Does somebody have such a behaviour ?
>Please help me ! What can I do to make the kernel2.6.13 works with my
>promise controller ?
>
>Thanks
>David

Hi, David. I think I have the same problem with a similar card, the SATA150
TX2plus. The sata_promise module sees the SATA ports, but not the PATA port.

Promise made up a driver called pdc-ultra (not based o ftlib.o) that worked with
2.4 kernels (I could see the PATA drive as a SCSI drive), but it spits back
"unresolved symbols" errors with 2.6. Promise is useless for tech support on
this.

Jeff Garzik says something on the libata website about a patch for preliminary
support of PATA on Promise SATA, but I haven't tried it out.

Matt
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-09-06 22:15    [W:3.980 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site