lkml.org 
[lkml]   [2005]   [Sep]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[DVB patch 44/54] cinergyT2: remote control fixes
IR RC fixes:
- EVIOCSKEYCODE is not supported by this driver, fix potential crash
when it is used by not setting rc_input_dev->keycodesize
- fix key repeat handling (hopefully)
- reduce default poll internal to 50msec (necessary for key repeat handling)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>

drivers/media/dvb/cinergyT2/Kconfig | 2
drivers/media/dvb/cinergyT2/cinergyT2.c | 93 +++++++++++++++++++-------------
2 files changed, 57 insertions(+), 38 deletions(-)
--- linux-2.6.13-git4.orig/drivers/media/dvb/cinergyT2/Kconfig 2005-09-04 22:03:40.000000000 +0200
+++ linux-2.6.13-git4/drivers/media/dvb/cinergyT2/Kconfig 2005-09-04 22:30:53.000000000 +0200
@@ -77,7 +77,7 @@ config DVB_CINERGYT2_ENABLE_RC_INPUT_DEV
config DVB_CINERGYT2_RC_QUERY_INTERVAL
int "Infrared Remote Controller update interval [milliseconds]"
depends on DVB_CINERGYT2_TUNING && DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE
- default "100"
+ default "50"
help
If you have a very fast-repeating remote control you can try lower
values, for normal consumer receivers the default value should be
--- linux-2.6.13-git4.orig/drivers/media/dvb/cinergyT2/cinergyT2.c 2005-09-04 22:27:49.000000000 +0200
+++ linux-2.6.13-git4/drivers/media/dvb/cinergyT2/cinergyT2.c 2005-09-04 22:30:53.000000000 +0200
@@ -35,7 +35,6 @@
#include "dvb_demux.h"
#include "dvb_net.h"

-
#ifdef CONFIG_DVB_CINERGYT2_TUNING
#define STREAM_URB_COUNT (CONFIG_DVB_CINERGYT2_STREAM_URB_COUNT)
#define STREAM_BUF_SIZE (CONFIG_DVB_CINERGYT2_STREAM_BUF_SIZE)
@@ -48,7 +47,7 @@
#define STREAM_URB_COUNT (32)
#define STREAM_BUF_SIZE (512) /* bytes */
#define ENABLE_RC (1)
- #define RC_QUERY_INTERVAL (100) /* milliseconds */
+ #define RC_QUERY_INTERVAL (50) /* milliseconds */
#define QUERY_INTERVAL (333) /* milliseconds */
#endif

@@ -141,6 +140,8 @@ struct cinergyt2 {
struct input_dev rc_input_dev;
struct work_struct rc_query_work;
int rc_input_event;
+ u32 rc_last_code;
+ unsigned long last_event_jiffies;
#endif
};

@@ -155,7 +156,7 @@ struct cinergyt2_rc_event {
uint32_t value;
} __attribute__((packed));

-static const uint32_t rc_keys [] = {
+static const uint32_t rc_keys[] = {
CINERGYT2_RC_EVENT_TYPE_NEC, 0xfe01eb04, KEY_POWER,
CINERGYT2_RC_EVENT_TYPE_NEC, 0xfd02eb04, KEY_1,
CINERGYT2_RC_EVENT_TYPE_NEC, 0xfc03eb04, KEY_2,
@@ -684,52 +685,68 @@ static struct dvb_device cinergyt2_fe_te
#ifdef ENABLE_RC
static void cinergyt2_query_rc (void *data)
{
- struct cinergyt2 *cinergyt2 = (struct cinergyt2 *) data;
- char buf [1] = { CINERGYT2_EP1_GET_RC_EVENTS };
+ struct cinergyt2 *cinergyt2 = data;
+ char buf[1] = { CINERGYT2_EP1_GET_RC_EVENTS };
struct cinergyt2_rc_event rc_events[12];
- int n, len;
+ int n, len, i;

if (down_interruptible(&cinergyt2->sem))
return;

len = cinergyt2_command(cinergyt2, buf, sizeof(buf),
- (char *) rc_events, sizeof(rc_events));
-
- for (n=0; len>0 && n<(len/sizeof(rc_events[0])); n++) {
- int i;
+ (char *) rc_events, sizeof(rc_events));
+ if (len < 0)
+ goto out;
+ if (len == 0) {
+ if (time_after(jiffies, cinergyt2->last_event_jiffies +
+ msecs_to_jiffies(150))) {
+ /* stop key repeat */
+ if (cinergyt2->rc_input_event != KEY_MAX) {
+ dprintk(1, "rc_input_event=%d Up\n", cinergyt2->rc_input_event);
+ input_report_key(&cinergyt2->rc_input_dev,
+ cinergyt2->rc_input_event, 0);
+ cinergyt2->rc_input_event = KEY_MAX;
+ }
+ cinergyt2->rc_last_code = ~0;
+ }
+ goto out;
+ }
+ cinergyt2->last_event_jiffies = jiffies;

-/* dprintk(1,"rc_events[%d].value = %x, type=%x\n",n,le32_to_cpu(rc_events[n].value),rc_events[n].type);*/
+ for (n = 0; n < (len / sizeof(rc_events[0])); n++) {
+ dprintk(1, "rc_events[%d].value = %x, type=%x\n",
+ n, le32_to_cpu(rc_events[n].value), rc_events[n].type);

if (rc_events[n].type == CINERGYT2_RC_EVENT_TYPE_NEC &&
- rc_events[n].value == ~0)
- {
- /**
- * keyrepeat bit. If we would handle this properly
- * we would need to emit down events as long the
- * keyrepeat goes, a up event if no further
- * repeat bits occur. Would need a timer to implement
- * and no other driver does this, so we simply
- * emit the last key up/down sequence again.
- */
+ rc_events[n].value == ~0) {
+ /* keyrepeat bit -> just repeat last rc_input_event */
} else {
cinergyt2->rc_input_event = KEY_MAX;
- for (i=0; i<sizeof(rc_keys)/sizeof(rc_keys[0]); i+=3) {
- if (rc_keys[i+0] == rc_events[n].type &&
- rc_keys[i+1] == le32_to_cpu(rc_events[n].value))
- {
- cinergyt2->rc_input_event = rc_keys[i+2];
+ for (i = 0; i < sizeof(rc_keys) / sizeof(rc_keys[0]); i += 3) {
+ if (rc_keys[i + 0] == rc_events[n].type &&
+ rc_keys[i + 1] == le32_to_cpu(rc_events[n].value)) {
+ cinergyt2->rc_input_event = rc_keys[i + 2];
break;
}
}
}

if (cinergyt2->rc_input_event != KEY_MAX) {
- input_report_key(&cinergyt2->rc_input_dev, cinergyt2->rc_input_event, 1);
- input_report_key(&cinergyt2->rc_input_dev, cinergyt2->rc_input_event, 0);
- input_sync(&cinergyt2->rc_input_dev);
+ if (rc_events[n].value == cinergyt2->rc_last_code &&
+ cinergyt2->rc_last_code != ~0) {
+ /* emit a key-up so the double event is recognized */
+ dprintk(1, "rc_input_event=%d UP\n", cinergyt2->rc_input_event);
+ input_report_key(&cinergyt2->rc_input_dev,
+ cinergyt2->rc_input_event, 0);
+ }
+ dprintk(1, "rc_input_event=%d\n", cinergyt2->rc_input_event);
+ input_report_key(&cinergyt2->rc_input_dev,
+ cinergyt2->rc_input_event, 1);
+ cinergyt2->rc_last_code = rc_events[n].value;
}
}

+out:
schedule_delayed_work(&cinergyt2->rc_query_work,
msecs_to_jiffies(RC_QUERY_INTERVAL));

@@ -771,7 +788,10 @@ static int cinergyt2_probe (struct usb_i
const struct usb_device_id *id)
{
struct cinergyt2 *cinergyt2;
- int i, err;
+ int err;
+#ifdef ENABLE_RC
+ int i;
+#endif

if (!(cinergyt2 = kmalloc (sizeof(struct cinergyt2), GFP_KERNEL))) {
dprintk(1, "out of memory?!?\n");
@@ -827,19 +847,18 @@ static int cinergyt2_probe (struct usb_i
DVB_DEVICE_FRONTEND);

#ifdef ENABLE_RC
- init_input_dev(&cinergyt2->rc_input_dev);
-
- cinergyt2->rc_input_dev.evbit[0] = BIT(EV_KEY);
- cinergyt2->rc_input_dev.keycodesize = sizeof(unsigned char);
- cinergyt2->rc_input_dev.keycodemax = KEY_MAX;
+ cinergyt2->rc_input_dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
+ cinergyt2->rc_input_dev.keycodesize = 0;
+ cinergyt2->rc_input_dev.keycodemax = 0;
cinergyt2->rc_input_dev.name = DRIVER_NAME " remote control";

- for (i=0; i<sizeof(rc_keys)/sizeof(rc_keys[0]); i+=3)
- set_bit(rc_keys[i+2], cinergyt2->rc_input_dev.keybit);
+ for (i = 0; i < sizeof(rc_keys) / sizeof(rc_keys[0]); i += 3)
+ set_bit(rc_keys[i + 2], cinergyt2->rc_input_dev.keybit);

input_register_device(&cinergyt2->rc_input_dev);

cinergyt2->rc_input_event = KEY_MAX;
+ cinergyt2->rc_last_code = ~0;

INIT_WORK(&cinergyt2->rc_query_work, cinergyt2_query_rc, cinergyt2);
schedule_delayed_work(&cinergyt2->rc_query_work, HZ/2);
--

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-09-05 02:03    [from the cache]
©2003-2011 Jasper Spaans