lkml.org 
[lkml]   [2005]   [Sep]   [3]   [last100]   RSS Feed
Views: [more markup]  [less markup]  [headers]  [forward] 
 
Messages in this thread
Patches in this message
/
DateSat, 03 Sep 2005 07:08:59 -0700
FromTyler <>
SubjectRe: [PATCH 2.6.13] libata: Marvell SATA support (PIO mode)
Brett Russ wrote:

>Some (non-functional) cleanup modifications since the version 0.10
>driver I sent out 2005-08-30.  Also adding signed-off-by for Jeff's
>upstream push.  This is my libata compatible low level driver for
>the Marvell SATA family.  Currently it successfully runs in PIO mode
>on a 6081 chip.  EDMA support is in the works and should be done
>shortly.  Review, testing (especially on other flavors of Marvell),
>comments welcome.
>
>Thank you,
>BR
>
>Signed-off-by: Brett Russ <russb@emc.com>
>
> 
>
[snip..]

Please find attached patches that add the Adaptec 1420SA controller to 
the PCI ID list in the driver, and a small note in the kernel config 
option to state so.  This is untested as of currently, if anyone has a 
1420SA to try, that would be great..  The one I had access to is now 
gone to a remote location out of reach for testing.  I read in one post 
I found with google, that the 1420SA uses a 6541 chip instead of a 6041, 
but I am not able to verify this, and also don't know if it may still 
work as a 6041.  The card is still a Sata2, PCI-X card, with 4 ports, 
the same as the 6041 based cards.  This patch may or may not be 
useful..  The card comes with a manufacturer ID of 9005 according to a 
linux PCI-ID list, which is a secondary id of Adaptec's known as 
ADAPTEC2, and an actual PCI Id of 0241.

Signed-off-by: Tyler Guthrie <pml@dtbb.net>


--- linux-2.6.13.orig/drivers/scsi/Kconfig      2005-09-03 
06:42:20.000000000 -0700
+++ linux-2.6.13drivers/scsi/Kconfig    2005-09-03 06:44:29.000000000 -0700
@@ -466,6 +466,8 @@
          This option enables support for the Marvell Serial ATA family.
          Currently supports 88SX[56]0[48][01] chips.
 
+         Also Including Adaptec 1420SA Card (using marvell chip pci-id 
0x0241).
+
          If unsure, say N.
 
 config SCSI_SATA_NV
--- linux-2.6.13.orig/drivers/scsi/sata_mv.c    2005-09-03 
06:40:07.000000000 -0700
+++ linux-2.6.13/drivers/scsi/sata_mv.c         2005-09-03 
06:39:47.000000000 -0700
@@ -286,6 +286,7 @@
        {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6041), 0, 0, chip_604x},
        {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6080), 0, 0, chip_608x},
        {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6081), 0, 0, chip_608x},
+       {PCI_DEVICE(PCI_VENDOR_ID_ADAPTEC2, 0x0241), 0, 0, chip_604x},
        {}                      /* terminate list */
 };


Tyler.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-09-03 16:11    [from the cache]
©2003-2008