Messages in this thread | | | Date | Sat, 24 Sep 2005 21:32:31 +0200 (CEST) | From | Guennadi Liakhovetski <> | Subject | [2.6.13] pktcdvd: IO-errors |
| |
Hi all
Just tried pktcdvd on 2.6.13.1. The setup went fine:
20:33:13: pktcdvd: writer pktcdvd0 mapped to hdc 20:33:21: pktcdvd: inserted media is CD-RW 20:33:21: pktcdvd: Fixed packets, 32 blocks, Mode-2 disc 20:33:21: pktcdvd: Max. media speed: 10 20:33:21: pktcdvd: write speed 10x 20:33:21: pktcdvd: 590528kB available on disc 20:33:23: UDF-fs INFO UDF 0.9.8.1 (2004/29/09) Mounting volume 'LinuxUDF', timestamp 2005/09/24 20:18 (1078)
But, as I tried to copy some files to the CD-RW, it first went ok, but then produced the following:
20:41:01: ide-cd: cmd 0x2a timed out ^^^^ ---------> write10 20:41:01: hdc: DMA timeout retry 20:41:01: hdc: timeout waiting for DMA 20:41:01: hdc: status timeout: status=0xd0 { Busy } 20:41:01: ide: failed opcode was: unknown 20:41:01: hdc: drive not ready for command 20:41:31: hdc: ATAPI reset timed-out, status=0x80 20:42:06: ide1: reset timed-out, status=0x80 20:42:06: hdc: status timeout: status=0x80 { Busy } 20:42:06: ide: failed opcode was: unknown 20:42:06: hdc: drive not ready for command 20:42:36: hdc: ATAPI reset timed-out, status=0x80 20:43:07: : I/O error, dev hdc, sector 136672 20:43:07: end_request: I/O error, dev hdc, sector 136680 20:43:07: end_request: I/O error, dev hdc, sector 136688 20:43:07: end_request: I/O error, dev hdc, sector 136696 20:43:07: end_request: I/O error, dev hdc, sector 137216 20:43:07: end_request: I/O error, dev hdc, sector 137224 20:43:07: end_request: I/O error, dev hdc, sector 137232 20:43:07: end_request: I/O error, dev hdc, sector 137240 ... <thousands of the above> 20:43:11: end_request: I/O error, dev hdc, sector 344440 20:43:11: end_request: I/O error, dev hdc, sector 344444 20:43:11: pktcdvd: bb 00 06 ea 06 ea 00 00 00 00 00 00 - sense 00.e0.0e (No sense) 20:43:11: end_request: I/O error, dev hdc, sector 363008 20:43:11: end_request: I/O error, dev hdc, sector 363016 ... <more of them> 20:43:11: printk: 79693 messages suppressed. 20:43:11: Buffer I/O error on device pktcdvd0, logical block 90752 20:43:11: lost page write due to I/O error on pktcdvd0 20:43:11: end_request: I/O error, dev hdc, sector 362880 20:43:11: end_request: I/O error, dev hdc, sector 362884 ...
the "cp" finished earlier, I did a sync, and it also finished. The good parts - no Oops, no process stuck in "D", tha bad parts - it didn't work:-), the IDE LED stays on and I cannot eject the CD. The CD-R is a BenQ 52x32x52 Seamless Link alone on ide1, the disk does indeed say 4x-10x. The cd-writer works mostly... if I am gentle to it - I usually burn at 32x even if the media says 52x... Is it just a hw-failure or a driver bug?
Thanks Guennadi --- Guennadi Liakhovetski - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |