lkml.org 
[lkml]   [2005]   [Sep]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] updated version of Jens' SATA suspend-to-ram patch
Jeff Garzik wrote:
>
> Very strange. I cannot find this patch at all in my email folders.
> Can someone resend it to me?

(attached)

..
>> - qc = ata_qc_new_init(ap, dev);
>> - BUG_ON(qc == NULL);
>> + while ((qc = ata_qc_new_init(ap, dev)) == NULL)
>> + msleep(10);
>>
..
> Worried now!

Hey, that code wasn't in the original patch last spring,
which I'm *still* using with zero problems this fall.

Mmmm...
diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c
--- a/drivers/scsi/ahci.c
+++ b/drivers/scsi/ahci.c
@@ -214,6 +214,8 @@ static Scsi_Host_Template ahci_sht = {
.slave_configure = ata_scsi_slave_config,
.bios_param = ata_std_bios_param,
.ordered_flush = 1,
+ .resume = ata_scsi_device_resume,
+ .suspend = ata_scsi_device_suspend,
};

static struct ata_port_operations ahci_ops = {
@@ -286,6 +288,8 @@ static struct pci_driver ahci_pci_driver
.id_table = ahci_pci_tbl,
.probe = ahci_init_one,
.remove = ahci_remove_one,
+ .suspend = ata_scsi_device_suspend,
+ .resume = ata_scsi_device_resume,
};


diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c
--- a/drivers/scsi/ata_piix.c
+++ b/drivers/scsi/ata_piix.c
@@ -125,6 +125,8 @@ static struct pci_driver piix_pci_driver
.id_table = piix_pci_tbl,
.probe = piix_init_one,
.remove = ata_pci_remove_one,
+ .suspend = ata_pci_device_suspend,
+ .resume = ata_pci_device_resume,
};

static Scsi_Host_Template piix_sht = {
@@ -145,6 +147,8 @@ static Scsi_Host_Template piix_sht = {
.slave_configure = ata_scsi_slave_config,
.bios_param = ata_std_bios_param,
.ordered_flush = 1,
+ .resume = ata_scsi_device_resume,
+ .suspend = ata_scsi_device_suspend,
};

static struct ata_port_operations piix_pata_ops = {
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -3829,6 +3829,104 @@ err_out:
* LOCKING:
*/

+/*
+ * Execute a 'simple' command, that only consists of the opcode 'cmd' itself,
+ * without filling any other registers
+ */
+static int ata_do_simple_cmd(struct ata_port *ap, struct ata_device *dev,
+ u8 cmd)
+{
+ DECLARE_COMPLETION(wait);
+ struct ata_queued_cmd *qc;
+ unsigned long flags;
+ int rc;
+
+ qc = ata_qc_new_init(ap, dev);
+ BUG_ON(qc == NULL);
+
+ qc->tf.command = cmd;
+ qc->tf.flags |= ATA_TFLAG_DEVICE;
+ qc->tf.protocol = ATA_PROT_NODATA;
+
+ qc->waiting = &wait;
+ qc->complete_fn = ata_qc_complete_noop;
+
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+ rc = ata_qc_issue(qc);
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
+
+ if (!rc)
+ wait_for_completion(&wait);
+
+ return rc;
+}
+
+static int ata_flush_cache(struct ata_port *ap, struct ata_device *dev)
+{
+ u8 cmd;
+
+ if (!ata_try_flush_cache(dev))
+ return 0;
+
+ if (ata_id_has_flush_ext(dev->id))
+ cmd = ATA_CMD_FLUSH_EXT;
+ else
+ cmd = ATA_CMD_FLUSH;
+
+ return ata_do_simple_cmd(ap, dev, cmd);
+}
+
+static int ata_standby_drive(struct ata_port *ap, struct ata_device *dev)
+{
+ return ata_do_simple_cmd(ap, dev, ATA_CMD_STANDBYNOW1);
+}
+
+static int ata_start_drive(struct ata_port *ap, struct ata_device *dev)
+{
+ return ata_do_simple_cmd(ap, dev, ATA_CMD_IDLEIMMEDIATE);
+}
+
+/**
+ * ata_device_resume - wakeup a previously suspended devices
+ *
+ * Kick the drive back into action, by sending it an idle immediate
+ * command and making sure its transfer mode matches between drive
+ * and host.
+ *
+ */
+int ata_device_resume(struct ata_port *ap, struct ata_device *dev)
+{
+ if (ap->flags & ATA_FLAG_SUSPENDED) {
+ ap->flags &= ~ATA_FLAG_SUSPENDED;
+ ata_set_mode(ap);
+ }
+ if (!ata_dev_present(dev))
+ return 0;
+ if (dev->class == ATA_DEV_ATA)
+ ata_start_drive(ap, dev);
+
+ return 0;
+}
+
+/**
+ * ata_device_suspend - prepare a device for suspend
+ *
+ * Flush the cache on the drive, if appropriate, then issue a
+ * standbynow command.
+ *
+ */
+int ata_device_suspend(struct ata_port *ap, struct ata_device *dev)
+{
+ if (!ata_dev_present(dev))
+ return 0;
+ if (dev->class == ATA_DEV_ATA)
+ ata_flush_cache(ap, dev);
+
+ ata_standby_drive(ap, dev);
+ ap->flags |= ATA_FLAG_SUSPENDED;
+ return 0;
+}
+
int ata_port_start (struct ata_port *ap)
{
struct device *dev = ap->host_set->dev;
@@ -4542,6 +4640,23 @@ int pci_test_config_bits(struct pci_dev

return (tmp == bits->val) ? 1 : 0;
}
+
+int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ pci_save_state(pdev);
+ pci_disable_device(pdev);
+ pci_set_power_state(pdev, PCI_D3hot);
+ return 0;
+}
+
+int ata_pci_device_resume(struct pci_dev *pdev)
+{
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ pci_enable_device(pdev);
+ pci_set_master(pdev);
+ return 0;
+}
#endif /* CONFIG_PCI */


@@ -4620,4 +4735,11 @@ EXPORT_SYMBOL_GPL(ata_pci_host_stop);
EXPORT_SYMBOL_GPL(ata_pci_init_native_mode);
EXPORT_SYMBOL_GPL(ata_pci_init_one);
EXPORT_SYMBOL_GPL(ata_pci_remove_one);
+EXPORT_SYMBOL_GPL(ata_pci_device_suspend);
+EXPORT_SYMBOL_GPL(ata_pci_device_resume);
#endif /* CONFIG_PCI */
+
+EXPORT_SYMBOL_GPL(ata_device_suspend);
+EXPORT_SYMBOL_GPL(ata_device_resume);
+EXPORT_SYMBOL_GPL(ata_scsi_device_suspend);
+EXPORT_SYMBOL_GPL(ata_scsi_device_resume);
diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
--- a/drivers/scsi/libata-scsi.c
+++ b/drivers/scsi/libata-scsi.c
@@ -402,6 +402,22 @@ int ata_scsi_error(struct Scsi_Host *hos
return 0;
}

+int ata_scsi_device_resume(struct scsi_device *sdev)
+{
+ struct ata_port *ap = (struct ata_port *) &sdev->host->hostdata[0];
+ struct ata_device *dev = &ap->device[sdev->id];
+
+ return ata_device_resume(ap, dev);
+}
+
+int ata_scsi_device_suspend(struct scsi_device *sdev)
+{
+ struct ata_port *ap = (struct ata_port *) &sdev->host->hostdata[0];
+ struct ata_device *dev = &ap->device[sdev->id];
+
+ return ata_device_suspend(ap, dev);
+}
+
/**
* ata_scsi_start_stop_xlat - Translate SCSI START STOP UNIT command
* @qc: Storage for translated ATA taskfile
diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c
--- a/drivers/scsi/sata_mv.c
+++ b/drivers/scsi/sata_mv.c
@@ -208,6 +208,8 @@ static Scsi_Host_Template mv_sht = {
.slave_configure = ata_scsi_slave_config,
.bios_param = ata_std_bios_param,
.ordered_flush = 1,
+ .suspend = ata_scsi_device_suspend,
+ .resume = ata_scsi_device_resume,
};

static struct ata_port_operations mv_ops = {
@@ -294,6 +296,8 @@ static struct pci_driver mv_pci_driver =
.id_table = mv_pci_tbl,
.probe = mv_init_one,
.remove = ata_pci_remove_one,
+ .suspend = ata_scsi_device_suspend,
+ .resume = ata_scsi_device_resume,
};

/*
diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c
--- a/drivers/scsi/sata_nv.c
+++ b/drivers/scsi/sata_nv.c
@@ -214,6 +214,8 @@ static struct pci_driver nv_pci_driver =
.id_table = nv_pci_tbl,
.probe = nv_init_one,
.remove = ata_pci_remove_one,
+ .suspend = ata_pci_device_suspend,
+ .resume = ata_pci_device_resume,
};

static Scsi_Host_Template nv_sht = {
@@ -234,6 +236,8 @@ static Scsi_Host_Template nv_sht = {
.slave_configure = ata_scsi_slave_config,
.bios_param = ata_std_bios_param,
.ordered_flush = 1,
+ .resume = ata_scsi_device_resume,
+ .suspend = ata_scsi_device_suspend,
};

static struct ata_port_operations nv_ops = {
diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c
--- a/drivers/scsi/sata_promise.c
+++ b/drivers/scsi/sata_promise.c
@@ -111,6 +111,8 @@ static Scsi_Host_Template pdc_ata_sht =
.slave_configure = ata_scsi_slave_config,
.bios_param = ata_std_bios_param,
.ordered_flush = 1,
+ .resume = ata_scsi_device_resume,
+ .suspend = ata_scsi_device_suspend,
};

static struct ata_port_operations pdc_sata_ops = {
@@ -231,6 +233,8 @@ static struct pci_driver pdc_ata_pci_dri
.id_table = pdc_ata_pci_tbl,
.probe = pdc_ata_init_one,
.remove = ata_pci_remove_one,
+ .suspend = ata_pci_device_suspend,
+ .resume = ata_pci_device_resume,
};


diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c
--- a/drivers/scsi/sata_qstor.c
+++ b/drivers/scsi/sata_qstor.c
@@ -143,6 +143,8 @@ static Scsi_Host_Template qs_ata_sht = {
.dma_boundary = QS_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.bios_param = ata_std_bios_param,
+ .resume = ata_scsi_device_resume,
+ .suspend = ata_scsi_device_suspend,
};

static struct ata_port_operations qs_ata_ops = {
@@ -194,6 +196,8 @@ static struct pci_driver qs_ata_pci_driv
.id_table = qs_ata_pci_tbl,
.probe = qs_ata_init_one,
.remove = ata_pci_remove_one,
+ .suspend = ata_pci_device_suspend,
+ .resume = ata_pci_device_resume,
};

static int qs_check_atapi_dma(struct ata_queued_cmd *qc)
diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c
--- a/drivers/scsi/sata_sil.c
+++ b/drivers/scsi/sata_sil.c
@@ -128,6 +128,8 @@ static struct pci_driver sil_pci_driver
.id_table = sil_pci_tbl,
.probe = sil_init_one,
.remove = ata_pci_remove_one,
+ .suspend = ata_pci_device_suspend,
+ .resume = ata_pci_device_resume,
};

static Scsi_Host_Template sil_sht = {
@@ -148,6 +150,8 @@ static Scsi_Host_Template sil_sht = {
.slave_configure = ata_scsi_slave_config,
.bios_param = ata_std_bios_param,
.ordered_flush = 1,
+ .resume = ata_scsi_device_resume,
+ .suspend = ata_scsi_device_suspend,
};

static struct ata_port_operations sil_ops = {
diff --git a/drivers/scsi/sata_sis.c b/drivers/scsi/sata_sis.c
--- a/drivers/scsi/sata_sis.c
+++ b/drivers/scsi/sata_sis.c
@@ -80,6 +80,8 @@ static struct pci_driver sis_pci_driver
.id_table = sis_pci_tbl,
.probe = sis_init_one,
.remove = ata_pci_remove_one,
+ .suspend = ata_pci_device_suspend,
+ .resume = ata_pci_device_resume,
};

static Scsi_Host_Template sis_sht = {
@@ -100,6 +102,8 @@ static Scsi_Host_Template sis_sht = {
.slave_configure = ata_scsi_slave_config,
.bios_param = ata_std_bios_param,
.ordered_flush = 1,
+ .resume = ata_scsi_device_resume,
+ .suspend = ata_scsi_device_suspend,
};

static struct ata_port_operations sis_ops = {
diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c
--- a/drivers/scsi/sata_svw.c
+++ b/drivers/scsi/sata_svw.c
@@ -294,6 +294,8 @@ static Scsi_Host_Template k2_sata_sht =
#endif
.bios_param = ata_std_bios_param,
.ordered_flush = 1,
+ .resume = ata_scsi_device_resume,
+ .suspend = ata_scsi_device_suspend,
};


@@ -470,6 +472,8 @@ static struct pci_driver k2_sata_pci_dri
.id_table = k2_sata_pci_tbl,
.probe = k2_sata_init_one,
.remove = ata_pci_remove_one,
+ .suspend = ata_pci_device_suspend,
+ .resume = ata_pci_device_resume,
};


diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c
--- a/drivers/scsi/sata_sx4.c
+++ b/drivers/scsi/sata_sx4.c
@@ -194,6 +194,8 @@ static Scsi_Host_Template pdc_sata_sht =
.slave_configure = ata_scsi_slave_config,
.bios_param = ata_std_bios_param,
.ordered_flush = 1,
+ .resume = ata_scsi_device_resume,
+ .suspend = ata_scsi_device_suspend,
};

static struct ata_port_operations pdc_20621_ops = {
@@ -240,6 +242,8 @@ static struct pci_driver pdc_sata_pci_dr
.id_table = pdc_sata_pci_tbl,
.probe = pdc_sata_init_one,
.remove = ata_pci_remove_one,
+ .suspend = ata_pci_device_suspend,
+ .resume = ata_pci_device_resume,
};


diff --git a/drivers/scsi/sata_uli.c b/drivers/scsi/sata_uli.c
--- a/drivers/scsi/sata_uli.c
+++ b/drivers/scsi/sata_uli.c
@@ -68,6 +68,8 @@ static struct pci_driver uli_pci_driver
.id_table = uli_pci_tbl,
.probe = uli_init_one,
.remove = ata_pci_remove_one,
+ .suspend = ata_pci_device_suspend,
+ .resume = ata_pci_device_resume,
};

static Scsi_Host_Template uli_sht = {
@@ -88,6 +90,8 @@ static Scsi_Host_Template uli_sht = {
.slave_configure = ata_scsi_slave_config,
.bios_param = ata_std_bios_param,
.ordered_flush = 1,
+ .resume = ata_scsi_device_resume,
+ .suspend = ata_scsi_device_suspend,
};

static struct ata_port_operations uli_ops = {
diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c
--- a/drivers/scsi/sata_via.c
+++ b/drivers/scsi/sata_via.c
@@ -87,6 +87,8 @@ static struct pci_driver svia_pci_driver
.id_table = svia_pci_tbl,
.probe = svia_init_one,
.remove = ata_pci_remove_one,
+ .suspend = ata_pci_device_suspend,
+ .resume = ata_pci_device_resume,
};

static Scsi_Host_Template svia_sht = {
@@ -107,6 +109,8 @@ static Scsi_Host_Template svia_sht = {
.slave_configure = ata_scsi_slave_config,
.bios_param = ata_std_bios_param,
.ordered_flush = 1,
+ .resume = ata_scsi_device_resume,
+ .suspend = ata_scsi_device_suspend,
};

static struct ata_port_operations svia_sata_ops = {
diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c
--- a/drivers/scsi/sata_vsc.c
+++ b/drivers/scsi/sata_vsc.c
@@ -228,6 +228,8 @@ static Scsi_Host_Template vsc_sata_sht =
.slave_configure = ata_scsi_slave_config,
.bios_param = ata_std_bios_param,
.ordered_flush = 1,
+ .resume = ata_scsi_device_resume,
+ .suspend = ata_scsi_device_suspend,
};


@@ -404,6 +406,8 @@ static struct pci_driver vsc_sata_pci_dr
.id_table = vsc_sata_pci_tbl,
.probe = vsc_sata_init_one,
.remove = ata_pci_remove_one,
+ .suspend = ata_pci_device_suspend,
+ .resume = ata_pci_device_resume,
};


diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1944,8 +1944,9 @@ EXPORT_SYMBOL(scsi_device_quiesce);
void
scsi_device_resume(struct scsi_device *sdev)
{
- if(scsi_device_set_state(sdev, SDEV_RUNNING))
+ if (scsi_device_set_state(sdev, SDEV_RUNNING))
return;
+
scsi_run_queue(sdev->request_queue);
}
EXPORT_SYMBOL(scsi_device_resume);
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -263,9 +263,40 @@ static int scsi_bus_match(struct device
return (sdp->inq_periph_qual == SCSI_INQ_PQ_CON)? 1: 0;
}

+static int scsi_bus_suspend(struct device * dev, pm_message_t state)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+ struct scsi_host_template *sht = sdev->host->hostt;
+ int err;
+
+ err = scsi_device_quiesce(sdev);
+ if (err)
+ return err;
+
+ if (sht->suspend)
+ err = sht->suspend(sdev);
+
+ return err;
+}
+
+static int scsi_bus_resume(struct device * dev)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+ struct scsi_host_template *sht = sdev->host->hostt;
+ int err = 0;
+
+ if (sht->resume)
+ err = sht->resume(sdev);
+
+ scsi_device_resume(sdev);
+ return err;
+}
+
struct bus_type scsi_bus_type = {
.name = "scsi",
.match = scsi_bus_match,
+ .suspend = scsi_bus_suspend,
+ .resume = scsi_bus_resume,
};

int scsi_sysfs_register(void)
diff --git a/include/linux/ata.h b/include/linux/ata.h
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -132,6 +132,8 @@ enum {
ATA_CMD_PACKET = 0xA0,
ATA_CMD_VERIFY = 0x40,
ATA_CMD_VERIFY_EXT = 0x42,
+ ATA_CMD_STANDBYNOW1 = 0xE0,
+ ATA_CMD_IDLEIMMEDIATE = 0xE1,

/* SETFEATURES stuff */
SETFEATURES_XFER = 0x03,
diff --git a/include/linux/libata.h b/include/linux/libata.h
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -117,6 +117,7 @@ enum {
ATA_FLAG_PIO_DMA = (1 << 8), /* PIO cmds via DMA */
ATA_FLAG_NOINTR = (1 << 9), /* FIXME: Remove this once
* proper HSM is in place. */
+ ATA_FLAG_SUSPENDED = (1 << 10), /* port is suspended */

ATA_QCFLAG_ACTIVE = (1 << 1), /* cmd not yet ack'd to scsi lyer */
ATA_QCFLAG_SG = (1 << 3), /* have s/g table? */
@@ -391,6 +392,8 @@ extern void ata_std_ports(struct ata_iop
extern int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
unsigned int n_ports);
extern void ata_pci_remove_one (struct pci_dev *pdev);
+extern int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t state);
+extern int ata_pci_device_resume(struct pci_dev *pdev);
#endif /* CONFIG_PCI */
extern int ata_device_add(struct ata_probe_ent *ent);
extern int ata_scsi_detect(Scsi_Host_Template *sht);
@@ -399,6 +402,10 @@ extern int ata_scsi_queuecmd(struct scsi
extern int ata_scsi_error(struct Scsi_Host *host);
extern int ata_scsi_release(struct Scsi_Host *host);
extern unsigned int ata_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc);
+extern int ata_scsi_device_resume(struct scsi_device *);
+extern int ata_scsi_device_suspend(struct scsi_device *);
+extern int ata_device_resume(struct ata_port *, struct ata_device *);
+extern int ata_device_suspend(struct ata_port *, struct ata_device *);
/*
* Default driver ops implementations
*/
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -295,6 +295,12 @@ struct scsi_host_template {
int (*proc_info)(struct Scsi_Host *, char *, char **, off_t, int, int);

/*
+ * suspend support
+ */
+ int (*resume)(struct scsi_device *);
+ int (*suspend)(struct scsi_device *);
+
+ /*
* Name of proc directory
*/
char *proc_name;
\
 
 \ /
  Last update: 2005-09-23 23:13    [W:1.699 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site