Messages in this thread | | | Date | Thu, 01 Sep 2005 22:38:26 +0200 | From | Jiri Slaby <> | Subject | Re: Serial driver (serial_core.c) status messages should be set to KERN_INFO |
| |
Alon Bar-Lev napsal(a):
> Hello, > > > When upgrading to 2.6.13 I've noticed that serial driver reports it > status with unknown severity, causing the boot-splash to be overridden. > > > Please consider this modification. > > > Best Regards, > > Alon Bar-Lev. > > > At drivers/serial/serial_core.c > > > static inline void > > uart_report_port(struct uart_driver *drv, struct uart_port *port) > { > - printk("%s%d", drv->dev_name, port->line); > + printk(KERN_INFO + "%s%d", drv->dev_name, port->line);
plus sign between that?
> > printk(" at ");
why the fellows didn't put this to the line above?
> switch (port->iotype) { > case UPIO_PORT: > printk("I/O 0x%x", port->iobase);
And what about these?
> break; > case UPIO_HUB6: > printk("I/O 0x%x offset 0x%x", port->iobase, port->hub6); > break; > case UPIO_MEM: > case UPIO_MEM32: > printk("MMIO 0x%lx", port->mapbase); > break; > } > printk(" (irq = %d) is a %s\n", port->irq, uart_type(port)); > }
regards,
-- Jiri Slaby www.fi.muni.cz/~xslaby ~\-/~ jirislaby@gmail.com ~\-/~ 241B347EC88228DE51EE A49C4A73A25004CB2A10
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |