lkml.org 
[lkml]   [2005]   [Aug]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: Linux-2.6.13-rc6: aic7xxx testers please..
From
Date
On Tue, 2005-08-09 at 15:35 -0400, John Stoffel wrote:
> Attached devices:
> Host: scsi0 Channel: 00 Id: 00 Lun: 00
> Vendor: COMPAQ Model: HC01841729 Rev: 3208
> Type: Direct-Access ANSI SCSI revision: 02
> Host: scsi0 Channel: 00 Id: 01 Lun: 00
> Vendor: COMPAQ Model: BD018222CA Rev: B016
> Type: Direct-Access ANSI SCSI revision: 02
> Host: scsi1 Channel: 00 Id: 06 Lun: 00
> Vendor: SUN Model: DLT7000 Rev: 1E48
> Type: Sequential-Access ANSI SCSI revision: 02
> Host: scsi2 Channel: 00 Id: 00 Lun: 00
> Vendor: EPSON Model: Stylus Storage Rev: 1.00
> Type: Direct-Access ANSI SCSI revision: 02

So basically the problem is on scsi1 with the tape device, which
apparently negotiates only narrow async?

What do the domain validation messages say about this device? They
should be in dmesg. I'm fairly certain that DLT tapes do better than
narrow async.

James


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-08-09 22:01    [W:0.081 / U:0.452 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site