lkml.org 
[lkml]   [2005]   [Aug]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[patch 11/16] block/xd: replace schedule_timeout() with msleep()/msleep_interruptible()
From: Nishanth Aravamudan <nacc@us.ibm.com>



Use msleep() or msleep_interruptible() [as appropriate]
instead of schedule_timeout() to gurantee the task delays as
expected. As a result changed the units of the timeout variable from
jiffies to msecs.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Maximilian Attems <janitor@sternwelten.at>
Signed-off-by: Domen Puncer <domen@coderock.org>
---
xd.c | 15 ++++++---------
1 files changed, 6 insertions(+), 9 deletions(-)

Index: quilt/drivers/block/xd.c
===================================================================
--- quilt.orig/drivers/block/xd.c
+++ quilt/drivers/block/xd.c
@@ -47,6 +47,7 @@
#include <linux/wait.h>
#include <linux/blkdev.h>
#include <linux/blkpg.h>
+#include <linux/delay.h>

#include <asm/system.h>
#include <asm/io.h>
@@ -62,7 +63,7 @@ static int xd[5] = { -1,-1,-1,-1, };

#define XD_DONT_USE_DMA 0 /* Initial value. may be overriden using
"nodma" module option */
-#define XD_INIT_DISK_DELAY (30*HZ/1000) /* 30 ms delay during disk initialization */
+#define XD_INIT_DISK_DELAY (30) /* 30 ms delay during disk initialization */

/* Above may need to be increased if a problem with the 2nd drive detection
(ST11M controller) or resetting a controller (WD) appears */
@@ -633,14 +634,12 @@ static u_char __init xd_initdrives (void
for (i = 0; i < XD_MAXDRIVES; i++) {
xd_build(cmdblk,CMD_TESTREADY,i,0,0,0,0,0);
if (!xd_command(cmdblk,PIO_MODE,NULL,NULL,NULL,XD_TIMEOUT*8)) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(XD_INIT_DISK_DELAY);
+ msleep_interruptible(XD_INIT_DISK_DELAY);

init_drive(count);
count++;

- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(XD_INIT_DISK_DELAY);
+ msleep_interruptible(XD_INIT_DISK_DELAY);
}
}
return (count);
@@ -761,8 +760,7 @@ static void __init xd_wd_init_controller

outb(0,XD_RESET); /* reset the controller */

- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(XD_INIT_DISK_DELAY);
+ msleep(XD_INIT_DISK_DELAY);
}

static void __init xd_wd_init_drive (u_char drive)
@@ -936,8 +934,7 @@ If you need non-standard settings use th
xd_maxsectors = 0x01;
outb(0,XD_RESET); /* reset the controller */

- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(XD_INIT_DISK_DELAY);
+ msleep(XD_INIT_DISK_DELAY);
}

static void __init xd_xebec_init_drive (u_char drive)
--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-08-09 00:35    [W:0.089 / U:0.704 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site