lkml.org 
[lkml]   [2005]   [Aug]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [linux-usb-devel] Re: 2.6.13-rc4-mm1
> Date: Sun, 31 Jul 2005 19:02:09 -0700
> From: david-b@pacbell.net
>
> > Date: Sun, 31 Jul 2005 16:02:44 -0700
> > From: Greg KH <greg@kroah.com>
> >
> > On Sun, Jul 31, 2005 at 11:25:10AM -0700, david-b@pacbell.net wrote:
> > > I think that "continuing" codepath came from someone at Phoenix, FWIW;
> > > the problem is that I see the PCI quirks code has evolved even farther
> > > from the main copy of the init code in the USB tree. Sigh.
> >
> > I don't like that either, but can't think of a way to make it easier to
> > keep them in sync. Can you?
>
> Sure. The problem as I see it is that there are two copies, and one
> of them isn't in the USB part of the tree. So just move it, and cope
> with the consequences during the 2.6.14 cycle:
>
> (a) Move the USB quirks out of the generic PCI drivers directory
> into the USB HCD directory (see the attached patch);
>
> (b) foreach HCD in (ehci ohci uhci) do:
>
> (1) Merge the two different routines: HCD internal init/reset
> and the PCI quirk code are identical in intent, but they
> each address different sets of quirks.
>
> (2) Then the HCD reset() and PCI quirk() code will call those
> single shared routine.

Attached, find a patch addressing the additional Makefile issue ...


> At OLS, Vojtech mentioned wanting to make "usb-handoff" be the default.
> That's seem plausible (USB has more than its fair share of BIOS issues!)
> but should only kick in sometime after we merge the two different sets
> of quirk handling logic.

... but conflicting with a patch Vojtech just submitted for "-mm";
which, as I said, should IMO kick in only after we merge the two
different sets of quirk logic.

- Dave



This moves the PCI quirk handling for USB host controllers from the
PCI directory to the USB directory.

Follow-on patches will need to:

- Merge the two copies that exist ... so EHCI, OHCI, and UHCI
each have only one copy of this PCI-specific init logic, and
it agrees with more recent code that's aware of _different_
sets of quirks.

- We should probably make "usb-handoff" be the default. The
late handoff seems to confuse some BIOS versions, and then
the input subsystem.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

Index: g26/drivers/usb/host/Makefile
===================================================================
--- g26.orig/drivers/usb/host/Makefile 2005-08-02 06:59:22.000000000 -0700
+++ g26/drivers/usb/host/Makefile 2005-08-02 07:58:44.000000000 -0700
@@ -1,8 +1,9 @@
#
-# Makefile for USB Host Controller Driver
-# framework and drivers
+# Makefile for USB Host Controller Drivers
#

+obj-$(CONFIG_PCI) += pci-quirks.o
+
obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o
Index: g26/drivers/usb/Makefile
===================================================================
--- g26.orig/drivers/usb/Makefile 2005-08-02 06:59:22.000000000 -0700
+++ g26/drivers/usb/Makefile 2005-08-02 07:58:44.000000000 -0700
@@ -8,6 +8,7 @@ obj-$(CONFIG_USB) += core/

obj-$(CONFIG_USB_MON) += mon/

+obj-$(CONFIG_PCI) += host/
obj-$(CONFIG_USB_EHCI_HCD) += host/
obj-$(CONFIG_USB_ISP116X_HCD) += host/
obj-$(CONFIG_USB_OHCI_HCD) += host/
Index: g26/drivers/Makefile
===================================================================
--- g26.orig/drivers/Makefile 2005-08-02 06:59:22.000000000 -0700
+++ g26/drivers/Makefile 2005-08-02 07:58:44.000000000 -0700
@@ -5,7 +5,7 @@
# Rewritten to use lists instead of if-statements.
#

-obj-$(CONFIG_PCI) += pci/
+obj-$(CONFIG_PCI) += pci/ usb/host/
obj-$(CONFIG_PARISC) += parisc/
obj-y += video/
obj-$(CONFIG_ACPI_BOOT) += acpi/
Index: g26/drivers/usb/host/pci-quirks.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ g26/drivers/usb/host/pci-quirks.c 2005-08-02 07:58:44.000000000 -0700
@@ -0,0 +1,279 @@
+/*
+ * This file contains work-arounds for many known PCI hardware and BIOS
+ * quirks relating to USB host controllers.
+ *
+ * There are a lot of those, especially on hardware that needs to work
+ * with USB mice and keyboard for booting. And this code needs to fire
+ * early; before the input subsystem gets initialized, and while BIOS
+ * (or SMI) code has few problems running.
+ *
+ * They're collected here since USB host controller drivers need to use
+ * the same code as part of hardware initialization.
+ *
+ * Copyright (c) 1999 Martin Mares <mj@ucw.cz>
+ * (and others)
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/acpi.h>
+
+// #include "pci.h"
+
+/*
+ * PIIX3 USB: We have to disable USB interrupts that are
+ * hardwired to PIRQD# and may be shared with an
+ * external device.
+ *
+ * Legacy Support Register (LEGSUP):
+ * bit13: USB PIRQ Enable (USBPIRQDEN),
+ * bit4: Trap/SMI On IRQ Enable (USBSMIEN).
+ *
+ * We mask out all r/wc bits, too.
+ */
+static void __devinit quirk_piix3_usb(struct pci_dev *dev)
+{
+ u16 legsup;
+
+ pci_read_config_word(dev, 0xc0, &legsup);
+ legsup &= 0x50ef;
+ pci_write_config_word(dev, 0xc0, legsup);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_2, quirk_piix3_usb );
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_2, quirk_piix3_usb );
+
+
+/* FIXME this should be the same code that the USB controllers use...
+ * the hcd->reset() method basically does this.
+ */
+
+#define UHCI_USBLEGSUP 0xc0 /* legacy support */
+#define UHCI_USBCMD 0 /* command register */
+#define UHCI_USBSTS 2 /* status register */
+#define UHCI_USBINTR 4 /* interrupt register */
+#define UHCI_USBLEGSUP_DEFAULT 0x2000 /* only PIRQ enable set */
+#define UHCI_USBCMD_RUN (1 << 0) /* RUN/STOP bit */
+#define UHCI_USBCMD_GRESET (1 << 2) /* Global reset */
+#define UHCI_USBCMD_CONFIGURE (1 << 6) /* config semaphore */
+#define UHCI_USBSTS_HALTED (1 << 5) /* HCHalted bit */
+
+#define OHCI_CONTROL 0x04
+#define OHCI_CMDSTATUS 0x08
+#define OHCI_INTRSTATUS 0x0c
+#define OHCI_INTRENABLE 0x10
+#define OHCI_INTRDISABLE 0x14
+#define OHCI_OCR (1 << 3) /* ownership change request */
+#define OHCI_CTRL_IR (1 << 8) /* interrupt routing */
+#define OHCI_INTR_OC (1 << 30) /* ownership change */
+
+#define EHCI_HCC_PARAMS 0x08 /* extended capabilities */
+#define EHCI_USBCMD 0 /* command register */
+#define EHCI_USBCMD_RUN (1 << 0) /* RUN/STOP bit */
+#define EHCI_USBSTS 4 /* status register */
+#define EHCI_USBSTS_HALTED (1 << 12) /* HCHalted bit */
+#define EHCI_USBINTR 8 /* interrupt register */
+#define EHCI_USBLEGSUP 0 /* legacy support register */
+#define EHCI_USBLEGSUP_BIOS (1 << 16) /* BIOS semaphore */
+#define EHCI_USBLEGSUP_OS (1 << 24) /* OS semaphore */
+#define EHCI_USBLEGCTLSTS 4 /* legacy control/status */
+#define EHCI_USBLEGCTLSTS_SOOE (1 << 13) /* SMI on ownership change */
+
+int usb_early_handoff __devinitdata = 0;
+static int __init usb_handoff_early(char *str)
+{
+ usb_early_handoff = 1;
+ return 0;
+}
+__setup("usb-handoff", usb_handoff_early);
+
+static void __devinit quirk_usb_handoff_uhci(struct pci_dev *pdev)
+{
+ unsigned long base = 0;
+ int wait_time, delta;
+ u16 val, sts;
+ int i;
+
+ for (i = 0; i < PCI_ROM_RESOURCE; i++)
+ if ((pci_resource_flags(pdev, i) & IORESOURCE_IO)) {
+ base = pci_resource_start(pdev, i);
+ break;
+ }
+
+ if (!base)
+ return;
+
+ /*
+ * stop controller
+ */
+ sts = inw(base + UHCI_USBSTS);
+ val = inw(base + UHCI_USBCMD);
+ val &= ~(u16)(UHCI_USBCMD_RUN | UHCI_USBCMD_CONFIGURE);
+ outw(val, base + UHCI_USBCMD);
+
+ /*
+ * wait while it stops if it was running
+ */
+ if ((sts & UHCI_USBSTS_HALTED) == 0)
+ {
+ wait_time = 1000;
+ delta = 100;
+
+ do {
+ outw(0x1f, base + UHCI_USBSTS);
+ udelay(delta);
+ wait_time -= delta;
+ val = inw(base + UHCI_USBSTS);
+ if (val & UHCI_USBSTS_HALTED)
+ break;
+ } while (wait_time > 0);
+ }
+
+ /*
+ * disable interrupts & legacy support
+ */
+ outw(0, base + UHCI_USBINTR);
+ outw(0x1f, base + UHCI_USBSTS);
+ pci_read_config_word(pdev, UHCI_USBLEGSUP, &val);
+ if (val & 0xbf)
+ pci_write_config_word(pdev, UHCI_USBLEGSUP, UHCI_USBLEGSUP_DEFAULT);
+
+}
+
+static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev)
+{
+ void __iomem *base;
+ int wait_time;
+
+ base = ioremap_nocache(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+ if (base == NULL) return;
+
+ if (readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) {
+ wait_time = 500; /* 0.5 seconds */
+ writel(OHCI_INTR_OC, base + OHCI_INTRENABLE);
+ writel(OHCI_OCR, base + OHCI_CMDSTATUS);
+ while (wait_time > 0 &&
+ readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) {
+ wait_time -= 10;
+ msleep(10);
+ }
+ }
+
+ /*
+ * disable interrupts
+ */
+ writel(~(u32)0, base + OHCI_INTRDISABLE);
+ writel(~(u32)0, base + OHCI_INTRSTATUS);
+
+ iounmap(base);
+}
+
+static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev)
+{
+ int wait_time, delta;
+ void __iomem *base, *op_reg_base;
+ u32 hcc_params, val, temp;
+ u8 cap_length;
+
+ base = ioremap_nocache(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+ if (base == NULL) return;
+
+ cap_length = readb(base);
+ op_reg_base = base + cap_length;
+ hcc_params = readl(base + EHCI_HCC_PARAMS);
+ hcc_params = (hcc_params >> 8) & 0xff;
+ if (hcc_params) {
+ pci_read_config_dword(pdev,
+ hcc_params + EHCI_USBLEGSUP,
+ &val);
+ if (((val & 0xff) == 1) && (val & EHCI_USBLEGSUP_BIOS)) {
+ /*
+ * Ok, BIOS is in smm mode, try to hand off...
+ */
+ pci_read_config_dword(pdev,
+ hcc_params + EHCI_USBLEGCTLSTS,
+ &temp);
+ pci_write_config_dword(pdev,
+ hcc_params + EHCI_USBLEGCTLSTS,
+ temp | EHCI_USBLEGCTLSTS_SOOE);
+ val |= EHCI_USBLEGSUP_OS;
+ pci_write_config_dword(pdev,
+ hcc_params + EHCI_USBLEGSUP,
+ val);
+
+ wait_time = 500;
+ do {
+ msleep(10);
+ wait_time -= 10;
+ pci_read_config_dword(pdev,
+ hcc_params + EHCI_USBLEGSUP,
+ &val);
+ } while (wait_time && (val & EHCI_USBLEGSUP_BIOS));
+ if (!wait_time) {
+ /*
+ * well, possibly buggy BIOS...
+ */
+ printk(KERN_WARNING "EHCI early BIOS handoff "
+ "failed (BIOS bug ?)\n");
+ pci_write_config_dword(pdev,
+ hcc_params + EHCI_USBLEGSUP,
+ EHCI_USBLEGSUP_OS);
+ pci_write_config_dword(pdev,
+ hcc_params + EHCI_USBLEGCTLSTS,
+ 0);
+ }
+ }
+ }
+
+ /*
+ * halt EHCI & disable its interrupts in any case
+ */
+ val = readl(op_reg_base + EHCI_USBSTS);
+ if ((val & EHCI_USBSTS_HALTED) == 0) {
+ val = readl(op_reg_base + EHCI_USBCMD);
+ val &= ~EHCI_USBCMD_RUN;
+ writel(val, op_reg_base + EHCI_USBCMD);
+
+ wait_time = 2000;
+ delta = 100;
+ do {
+ writel(0x3f, op_reg_base + EHCI_USBSTS);
+ udelay(delta);
+ wait_time -= delta;
+ val = readl(op_reg_base + EHCI_USBSTS);
+ if ((val == ~(u32)0) || (val & EHCI_USBSTS_HALTED)) {
+ break;
+ }
+ } while (wait_time > 0);
+ }
+ writel(0, op_reg_base + EHCI_USBINTR);
+ writel(0x3f, op_reg_base + EHCI_USBSTS);
+
+ iounmap(base);
+
+ return;
+}
+
+
+
+static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev)
+{
+ if (!usb_early_handoff)
+ return;
+
+ if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x00)) { /* UHCI */
+ quirk_usb_handoff_uhci(pdev);
+ } else if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x10)) { /* OHCI */
+ quirk_usb_handoff_ohci(pdev);
+ } else if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x20)) { /* EHCI */
+ quirk_usb_disable_ehci(pdev);
+ }
+
+ return;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff);
Index: g26/drivers/pci/quirks.c
===================================================================
--- g26.orig/drivers/pci/quirks.c 2005-08-02 07:06:10.000000000 -0700
+++ g26/drivers/pci/quirks.c 2005-08-02 07:58:44.000000000 -0700
@@ -7,6 +7,9 @@
*
* Copyright (c) 1999 Martin Mares <mj@ucw.cz>
*
+ * Quirks for USB host controllers should be handled in the USB
+ * quirks file; that code is reused by host controller drivers.
+ *
* The bridge optimization stuff has been removed. If you really
* have a silly BIOS which is unable to set your host bridge right,
* use the PowerTweak utility (see http://powertweak.sourceforge.net).
@@ -513,28 +516,6 @@ static void quirk_via_irq(struct pci_dev
DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irq);

/*
- * PIIX3 USB: We have to disable USB interrupts that are
- * hardwired to PIRQD# and may be shared with an
- * external device.
- *
- * Legacy Support Register (LEGSUP):
- * bit13: USB PIRQ Enable (USBPIRQDEN),
- * bit4: Trap/SMI On IRQ Enable (USBSMIEN).
- *
- * We mask out all r/wc bits, too.
- */
-static void __devinit quirk_piix3_usb(struct pci_dev *dev)
-{
- u16 legsup;
-
- pci_read_config_word(dev, 0xc0, &legsup);
- legsup &= 0x50ef;
- pci_write_config_word(dev, 0xc0, legsup);
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_2, quirk_piix3_usb );
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_2, quirk_piix3_usb );
-
-/*
* VIA VT82C598 has its device ID settable and many BIOSes
* set it to the ID of VT82C597 for backward compatibility.
* We need to switch it off to be able to recognize the real
@@ -876,234 +857,6 @@ static void __init quirk_sis_96x_smbus(s
pci_read_config_byte(dev, 0x77, &val);
}

-
-#define UHCI_USBLEGSUP 0xc0 /* legacy support */
-#define UHCI_USBCMD 0 /* command register */
-#define UHCI_USBSTS 2 /* status register */
-#define UHCI_USBINTR 4 /* interrupt register */
-#define UHCI_USBLEGSUP_DEFAULT 0x2000 /* only PIRQ enable set */
-#define UHCI_USBCMD_RUN (1 << 0) /* RUN/STOP bit */
-#define UHCI_USBCMD_GRESET (1 << 2) /* Global reset */
-#define UHCI_USBCMD_CONFIGURE (1 << 6) /* config semaphore */
-#define UHCI_USBSTS_HALTED (1 << 5) /* HCHalted bit */
-
-#define OHCI_CONTROL 0x04
-#define OHCI_CMDSTATUS 0x08
-#define OHCI_INTRSTATUS 0x0c
-#define OHCI_INTRENABLE 0x10
-#define OHCI_INTRDISABLE 0x14
-#define OHCI_OCR (1 << 3) /* ownership change request */
-#define OHCI_CTRL_IR (1 << 8) /* interrupt routing */
-#define OHCI_INTR_OC (1 << 30) /* ownership change */
-
-#define EHCI_HCC_PARAMS 0x08 /* extended capabilities */
-#define EHCI_USBCMD 0 /* command register */
-#define EHCI_USBCMD_RUN (1 << 0) /* RUN/STOP bit */
-#define EHCI_USBSTS 4 /* status register */
-#define EHCI_USBSTS_HALTED (1 << 12) /* HCHalted bit */
-#define EHCI_USBINTR 8 /* interrupt register */
-#define EHCI_USBLEGSUP 0 /* legacy support register */
-#define EHCI_USBLEGSUP_BIOS (1 << 16) /* BIOS semaphore */
-#define EHCI_USBLEGSUP_OS (1 << 24) /* OS semaphore */
-#define EHCI_USBLEGCTLSTS 4 /* legacy control/status */
-#define EHCI_USBLEGCTLSTS_SOOE (1 << 13) /* SMI on ownership change */
-
-int usb_early_handoff __devinitdata = 0;
-static int __init usb_handoff_early(char *str)
-{
- usb_early_handoff = 1;
- return 0;
-}
-__setup("usb-handoff", usb_handoff_early);
-
-static void __devinit quirk_usb_handoff_uhci(struct pci_dev *pdev)
-{
- unsigned long base = 0;
- int wait_time, delta;
- u16 val, sts;
- int i;
-
- for (i = 0; i < PCI_ROM_RESOURCE; i++)
- if ((pci_resource_flags(pdev, i) & IORESOURCE_IO)) {
- base = pci_resource_start(pdev, i);
- break;
- }
-
- if (!base)
- return;
-
- /*
- * stop controller
- */
- sts = inw(base + UHCI_USBSTS);
- val = inw(base + UHCI_USBCMD);
- val &= ~(u16)(UHCI_USBCMD_RUN | UHCI_USBCMD_CONFIGURE);
- outw(val, base + UHCI_USBCMD);
-
- /*
- * wait while it stops if it was running
- */
- if ((sts & UHCI_USBSTS_HALTED) == 0)
- {
- wait_time = 1000;
- delta = 100;
-
- do {
- outw(0x1f, base + UHCI_USBSTS);
- udelay(delta);
- wait_time -= delta;
- val = inw(base + UHCI_USBSTS);
- if (val & UHCI_USBSTS_HALTED)
- break;
- } while (wait_time > 0);
- }
-
- /*
- * disable interrupts & legacy support
- */
- outw(0, base + UHCI_USBINTR);
- outw(0x1f, base + UHCI_USBSTS);
- pci_read_config_word(pdev, UHCI_USBLEGSUP, &val);
- if (val & 0xbf)
- pci_write_config_word(pdev, UHCI_USBLEGSUP, UHCI_USBLEGSUP_DEFAULT);
-
-}
-
-static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev)
-{
- void __iomem *base;
- int wait_time;
-
- base = ioremap_nocache(pci_resource_start(pdev, 0),
- pci_resource_len(pdev, 0));
- if (base == NULL) return;
-
- if (readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) {
- wait_time = 500; /* 0.5 seconds */
- writel(OHCI_INTR_OC, base + OHCI_INTRENABLE);
- writel(OHCI_OCR, base + OHCI_CMDSTATUS);
- while (wait_time > 0 &&
- readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) {
- wait_time -= 10;
- msleep(10);
- }
- }
-
- /*
- * disable interrupts
- */
- writel(~(u32)0, base + OHCI_INTRDISABLE);
- writel(~(u32)0, base + OHCI_INTRSTATUS);
-
- iounmap(base);
-}
-
-static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev)
-{
- int wait_time, delta;
- void __iomem *base, *op_reg_base;
- u32 hcc_params, val, temp;
- u8 cap_length;
-
- base = ioremap_nocache(pci_resource_start(pdev, 0),
- pci_resource_len(pdev, 0));
- if (base == NULL) return;
-
- cap_length = readb(base);
- op_reg_base = base + cap_length;
- hcc_params = readl(base + EHCI_HCC_PARAMS);
- hcc_params = (hcc_params >> 8) & 0xff;
- if (hcc_params) {
- pci_read_config_dword(pdev,
- hcc_params + EHCI_USBLEGSUP,
- &val);
- if (((val & 0xff) == 1) && (val & EHCI_USBLEGSUP_BIOS)) {
- /*
- * Ok, BIOS is in smm mode, try to hand off...
- */
- pci_read_config_dword(pdev,
- hcc_params + EHCI_USBLEGCTLSTS,
- &temp);
- pci_write_config_dword(pdev,
- hcc_params + EHCI_USBLEGCTLSTS,
- temp | EHCI_USBLEGCTLSTS_SOOE);
- val |= EHCI_USBLEGSUP_OS;
- pci_write_config_dword(pdev,
- hcc_params + EHCI_USBLEGSUP,
- val);
-
- wait_time = 500;
- do {
- msleep(10);
- wait_time -= 10;
- pci_read_config_dword(pdev,
- hcc_params + EHCI_USBLEGSUP,
- &val);
- } while (wait_time && (val & EHCI_USBLEGSUP_BIOS));
- if (!wait_time) {
- /*
- * well, possibly buggy BIOS...
- */
- printk(KERN_WARNING "EHCI early BIOS handoff "
- "failed (BIOS bug ?)\n");
- pci_write_config_dword(pdev,
- hcc_params + EHCI_USBLEGSUP,
- EHCI_USBLEGSUP_OS);
- pci_write_config_dword(pdev,
- hcc_params + EHCI_USBLEGCTLSTS,
- 0);
- }
- }
- }
-
- /*
- * halt EHCI & disable its interrupts in any case
- */
- val = readl(op_reg_base + EHCI_USBSTS);
- if ((val & EHCI_USBSTS_HALTED) == 0) {
- val = readl(op_reg_base + EHCI_USBCMD);
- val &= ~EHCI_USBCMD_RUN;
- writel(val, op_reg_base + EHCI_USBCMD);
-
- wait_time = 2000;
- delta = 100;
- do {
- writel(0x3f, op_reg_base + EHCI_USBSTS);
- udelay(delta);
- wait_time -= delta;
- val = readl(op_reg_base + EHCI_USBSTS);
- if ((val == ~(u32)0) || (val & EHCI_USBSTS_HALTED)) {
- break;
- }
- } while (wait_time > 0);
- }
- writel(0, op_reg_base + EHCI_USBINTR);
- writel(0x3f, op_reg_base + EHCI_USBSTS);
-
- iounmap(base);
-
- return;
-}
-
-
-
-static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev)
-{
- if (!usb_early_handoff)
- return;
-
- if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x00)) { /* UHCI */
- quirk_usb_handoff_uhci(pdev);
- } else if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x10)) { /* OHCI */
- quirk_usb_handoff_ohci(pdev);
- } else if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x20)) { /* EHCI */
- quirk_usb_disable_ehci(pdev);
- }
-
- return;
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff);
-
/*
* ... This is further complicated by the fact that some SiS96x south
* bridges pretend to be 85C503/5513 instead. In that case see if we
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2005-08-05 16:21    [W:0.152 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site