[lkml]   [2005]   [Aug]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: Kernel/Box Freezes Under Kernel
Justin Piszcz wrote:

> I have three different Maxtor (promise) ATA/133 controllers, it
> happens with all three.

Ever since going to 2.6.12 I also have random hangs with my fileserver.

I've got a
Bus 0, device 6, function 0:
Unknown mass storage controller: Promise Technology, Inc. 20269
(rev 2).
IRQ 17.
Master Capable. Latency=32. Min Gnt=4.Max Lat=18.
I/O at 0xec00 [0xec07].
I/O at 0xe800 [0xe803].
I/O at 0xe400 [0xe407].
I/O at 0xe000 [0xe003].
I/O at 0xdc00 [0xdc0f].
Non-prefetchable 32 bit memory at 0xdfffc000 [0xdfffffff].

in the box.

Since I do not have a serial cable attached I dont have the panic
output. But iirc it crashes somewhere in an interrupt handler
complaining about damaged pagetables (thats why I thought it was bad
memory). But it takes about 3 days for the machine to hang (and I'm
happily using all the memory and have high disk i/o in the meantime).

I'll go and replace the memory but perhaps there really is a bug in the

kind regards Philip

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-08-28 18:22    [W:0.030 / U:16.988 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site