[lkml]   [2005]   [Aug]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: Problem with cpufreq on Geode GX1

I will check code in several days, but I cannot re-produce a problem in a moment
because I am away from home for business trip.

In my understand, the driver recognize the CPU properly.

At Fri, 26 Aug 2005 19:01:37 +0100,
Jose Miguel Goncalves wrote:
> Hi all,
> I'm trying to use cpufreq on my Geode GX1 board with linux-, but,
> while everything seems OK, i.e., I can change from performance to powersave
> governor and back and /proc/cpuinfo reports me frequency changes, I can
> get no effective frequency/CPU power change because I check it with
> the Whetstone benchmark and it allways give me the same value (~100 MWIPS).
> Any ideas from were could be the problem?

Can you try to check also follows?


With this driver, it will significantly slow down by setting powersave mode.
It seems some bus in the driver.

Thank you for report.


Hiroshi Miura ---, Mobile ---
NTTDATA Corp. OpenSource Software Center. ---
NTTDATA Intellilink Corp. OpenSource Engineering Dev. --
Kobe Institute of Computing Graduate School of IT - Lecturer --
Key id=04AB8617 fingerprint=9117 9407 5684 FBF1 4063 15B4 401D D077 04AB 8617

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-08-28 13:13    [W:0.037 / U:4.056 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site