Messages in this thread | | | Date | Thu, 25 Aug 2005 13:42:30 +0200 | From | Frederik Schueler <> | Subject | Re: new qla2xxx driver breaks SAN setup with 2 controllers |
| |
Hello,
your patch works!
first a box booting from a gdth:
a01:~# lsscsi [0:0:0:0] disk ICP Host Drive #00 /dev/sda [0:2:6:0] process SUPER GEM318 0 - [1:0:0:10] disk IFT A16F-R1211 334B /dev/sdb [1:0:0:12] disk IFT A16F-R1211 334B /dev/sdc [1:0:0:14] disk IFT A16F-R1211 334B /dev/sdd [1:0:1:9] disk IFT A16F-R1211 334B /dev/sde [1:0:1:11] disk IFT A16F-R1211 334B /dev/sdf [1:0:1:13] disk IFT A16F-R1211 334B /dev/sdg
and this is one of the cluster nodes, wich boots from san:
s06:~# lsscsi [0:0:0:3] disk IFT A16F-R1211 334B /dev/sda [0:0:0:10] disk IFT A16F-R1211 334B /dev/sdb [0:0:0:12] disk IFT A16F-R1211 334B /dev/sdc [0:0:0:14] disk IFT A16F-R1211 334B /dev/sdd [0:0:1:9] disk IFT A16F-R1211 334B /dev/sde [0:0:1:11] disk IFT A16F-R1211 334B /dev/sdf [0:0:1:13] disk IFT A16F-R1211 334B /dev/sdg
it finds everything on bootup.
Best regards Frederik Schueler
-- ENOSIG [unhandled content-type:application/pgp-signature] | |