lkml.org 
[lkml]   [2005]   [Aug]   [23]   [last100]   RSS Feed
Views: [more markup]  [less markup]  [headers]  [forward] 
 
Messages in this thread
/
DateTue, 23 Aug 2005 11:11:58 +0200
FromTomasz Chmielewski <>
Subjectmass "tulip_stop_rxtx() failed", network stops
We are running almost 20 Fujitsu-Siemens Scenic machines, 2.6.8.1 
kernel, equipped with a onboard card that uses a tulip module:

02:01.0 Ethernet controller: Linksys NC100 Network Everywhere Fast 
Ethernet 10/100 (rev 11)

No problem with those.


We are running four more machines like that, the only difference is the 
kernel they are running (2.6.11.4).

On some of them, there are serious problems with a network, and they 
usually happen when the traffic is bigger than usual (i.e., some big 
software deployment to several workstations, remote backup, etc.).

The syslog is then full of entries like that:

Aug 21 04:04:30 SERVER-B-HS kernel: NETDEV WATCHDOG: eth0: transmit 
timed out
Aug 21 04:04:30 SERVER-B-HS kernel: 0000:00:06.0: tulip_stop_rxtx() failed
and it's filling logs for hours; network doesn't work anymore, and 
someone has to restart the network or the machine itself.

It doesn't always happen with a big traffic - sometimes you can fill the 
100 Mbit link and do lots of reads from the disk, but nothing bad 
happens for hours.


I saw some posts on this issue ("2.6.10-rc3: tulip-driver: 
tulip_stop_rxtx() failed"), but it seemed to me that it wasn't similar 
to my problems; I looked into >2.6.10 kernel changelog, but there were 
no descriptions of that problem, either.


Any help appreciated, because rebooting machines which are 500 km away 
and are not responding is no fun :)


-- 
Tomek
http://wpkg.org

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-08-23 11:14    [from the cache]
©2003-2008