lkml.org 
[lkml]   [2005]   [Aug]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Power consumption HZ100, HZ250, HZ1000: new numbers
* James Bruce <bruce@andrew.cmu.edu> [050801 09:28]:
>
> Finally, as a conspiracy theorist, I wonder if Linus is just playing us
> to get more people working on the tick skipping and highres timer
> patches. Someone with the ability to herd cats obviously has to be
> sneaky. As an impressive demonstration of my free will I'm going to go
> test dyntick on my VIA Epia board...

Yeah, I've been running dyntick on my VIA Epia home server for a while now:

# uname -r
2.6.12-rc4

# uptime
23:39:46 up 76 days, 9:10, 5 users, load average: 0.00, 0.01, 0.00

# pmstats 5
Current: 0mA Voltage: 0.00mV Power: 0.00W 0mAh Time: 00:00h Ticks: 0HZ
Current: 0mA Voltage: 0.00mV Power: 0.00W 0mAh Time: 00:00h Ticks: 33HZ
Current: 0mA Voltage: 0.00mV Power: 0.00W 0mAh Time: 00:00h Ticks: 32HZ
Current: 0mA Voltage: 0.00mV Power: 0.00W 0mAh Time: 00:00h Ticks: 34HZ
Current: 0mA Voltage: 0.00mV Power: 0.00W 0mAh Time: 00:00h Ticks: 35HZ

My server is mostly idle, and the average HZ is around 35HZ.

This is still with the max HZ set to 1000. With dyntick, the max HZ
should be set to something that provides best performance under heavy
load on the system. Or least latency or whatever.

But AFAIK, it does not make any sense to limit the max HZ because of
power savings. That's just a bad compromise.

Regards,

Tony
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-08-02 08:49    [W:0.235 / U:0.472 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site