Messages in this thread | | | Date | Sun, 14 Aug 2005 13:44:42 +0100 | From | Daniel Drake <> | Subject | Re: IT8212/ITE RAID |
| |
CaT wrote: >>>1. Alan Cox's IDE driver that was included in his ac patchset, which >>> seems to have died at 2.6.11ac7. >> >>Alan's driver has been merged into 2.6.13. You can get the up-to-date > > > Wooooooooooooooooooooooooooo! > > >>patches here: >> >>http://dev.gentoo.org/~dsd/genpatches/trunk/2.6.12/2315_ide-no-lba.patch >>http://dev.gentoo.org/~dsd/genpatches/trunk/2.6.12/4345_it8212.patch > > > Didn't use these patches. Just went to 13-rc6 for now to test. All works > as before with the following errors on bootup:
Alan Cox might be interested in these, adding to CC.
> > [227523.229512] hda: max request size: 128KiB > [227523.229557] hda: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, BUG > [227523.229631] hda: cache flushes not supported > [227523.229932] hda:hda: recal_intr: status=0x51 { DriveReady SeekComplete Error } > [227523.230905] hda: recal_intr: error=0x04 { DriveStatusError } > [227523.230952] ide: failed opcode was: unknown > [227524.379085] hda1 > [227524.379710] hdc: max request size: 128KiB > [227524.379752] hdc: 120103200 sectors (61492 MB) w/1821KiB Cache, CHS=16383/255/63, BUG > [227524.379825] hdc: cache flushes not supported > [227524.379991] hdc:hdc: recal_intr: status=0x51 { DriveReady SeekComplete Error } > [227524.380702] hdc: recal_intr: error=0x04 { DriveStatusError } > [227524.380748] ide: failed opcode was: unknown > [227525.536757] hdc1 hdc2 > > > /dev/hda: > > Model=ST3200822A, FwRev=3.01, SerialNo=3LJ22Y8F > Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% } > RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4 > BuffType=unknown, BuffSize=8192kB, MaxMultSect=16, MultSect=16 > CurCHS=65535/1/63, CurSects=4128705, LBA=yes, LBAsects=268435455 > IORDY=on/off > PIO modes: pio0 pio1 pio2 > DMA modes: mdma0 mdma1 mdma2 > AdvancedPM=no > Drive conforms to: ATA/ATAPI-6 T13 1410D revision 2: > > * signifies the current active mode > > > /dev/hdc: > > Model=IC35L060AVV207-0, FwRev=V22OA63A, SerialNo=VNVB01G2RAK8XH > Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } > RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=52 > BuffType=DualPortCache, BuffSize=1821kB, MaxMultSect=16, MultSect=16 > CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=120103200 > IORDY=on/off > PIO modes: pio0 pio1 pio2 > DMA modes: mdma0 mdma1 mdma2 > AdvancedPM=no > Drive conforms to: ATA/ATAPI-6 T13 1410D revision 3a: > > * signifies the current active mode >
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |