Messages in this thread | | | Date | Mon, 01 Aug 2005 12:10:47 -0600 | From | Robert Hancock <> | Subject | Re: amd74xx (nforce) driver problem ? |
| |
Sonny Rao wrote: > NFORCE2: IDE controller at PCI slot 0000:00:09.0 > NFORCE2: chipset revision 162 > NFORCE2: not 100% native mode: will probe irqs later > NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround. > NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller > ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA > ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA > > > Shouldn't the driver set the channel to UDMA100 after it detects the BIOS > set up the chip improperly, or am I mistaken about this behavior? Isn't > that the "workaround" or does that mean something else?
I think the workaround is something else. I get that message as well on nForce4 (Asus A8N-SLI Deluxe). The drives are definitely set to auto in the BIOS (only optical drives are on the PATA controller).
-- Robert Hancock Saskatoon, SK, Canada To email, remove "nospam" from hancockr@nospamshaw.ca Home Page: http://www.roberthancock.com/
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |