lkml.org 
[lkml]   [2005]   [Jul]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH] [40/48] Suspend2 2.1.9.8 for 2.6.12: 616-prepare_image.patch
Date
From
diff -ruNp 617-proc.patch-old/kernel/power/suspend2_core/proc.c 617-proc.patch-new/kernel/power/suspend2_core/proc.c
--- 617-proc.patch-old/kernel/power/suspend2_core/proc.c 1970-01-01 10:00:00.000000000 +1000
+++ 617-proc.patch-new/kernel/power/suspend2_core/proc.c 2005-07-04 23:14:19.000000000 +1000
@@ -0,0 +1,336 @@
+/*
+ * /kernel/power/proc.c
+ *
+ * Copyright (C) 2002-2005 Nigel Cunningham <nigel@suspend2.net>
+ *
+ * This file is released under the GPLv2.
+ *
+ * This file contains support for proc entries for tuning Software Suspend.
+ *
+ * We have a generic handler that deals with the most common cases, and
+ * hooks for special handlers to use.
+ *
+ * Versions:
+ * 1: /proc/sys/kernel/suspend the only tuning interface
+ * 2: Initial version of this file
+ * 3: Removed kernel debugger parameter.
+ * Added checkpage parameter (for checking checksum of a page over time).
+ * 4: Added entry for maximum granularity in splash screen progress bar.
+ * (Progress bar is slow, but the right setting will vary with disk &
+ * processor speed and the user's tastes).
+ * 5: Added enable_escape to control ability to cancel aborting by pressing
+ * ESC key.
+ * 6: Removed checksumming and checkpage parameter. Made all debugging proc
+ * entries dependant upon debugging being compiled in.
+ * Meaning of some flags also changed in this version.
+ * 7: Added header_locations entry to simplify getting the resume= parameter for
+ * swapfiles easy and swapfile entry for automatically doing swapon/off from
+ * swapfiles as well as partitions.
+ * 8: Added option for marking process pages as pageset 2 (processes_pageset2).
+ * 9: Added option for keep image mode.
+ * Enumeration patch from Michael Frank applied.
+ * 10: Various corrections to when options are disabled/enabled;
+ * Added option for specifying expected compression.
+ * 11: Added option for freezer testing. Debug only.
+ * 12: Removed test entries no_async_[read|write], processes_pageset2 and
+ * NoPageset2.
+ * 13: Make default_console_level available when debugging disabled, but limited
+ * to 0 or 1.
+ * 14: Rewrite to allow for dynamic registration of proc entries and smooth the
+ * transition to kobjects in 2.6.
+ * 15: Add setting resume2 parameter without rebooting (still need to run lilo
+ * though!). Add support for generic string handling and switch resume2 to use
+ * it.
+ * 16: Switched to cryptoapi, adding entries for selecting encryptor and compressor.
+ */
+
+#define SUSPEND_PROC_C
+
+static int suspend_proc_version = 16;
+static int suspend_proc_initialised = 0;
+
+#include <linux/suspend.h>
+#include <linux/module.h>
+#include <asm/uaccess.h>
+
+#include "proc.h"
+#include "suspend.h"
+
+static struct list_head suspend_proc_entries;
+static struct proc_dir_entry *suspend_dir;
+static struct suspend_proc_data proc_params[];
+
+extern void __suspend2_try_resume(void);
+extern void __suspend2_try_suspend(void);
+
+/* suspend2_read_proc
+ *
+ * Generic handling for reading the contents of bits, integers,
+ * unsigned longs and strings.
+ */
+static int suspend2_read_proc(char * page, char ** start, off_t off, int count,
+ int *eof, void *data)
+{
+ int len = 0;
+ struct suspend_proc_data * proc_data = (struct suspend_proc_data *) data;
+
+ if (suspend_start_anything(0))
+ return -EBUSY;
+
+ switch (proc_data->type) {
+ case SUSPEND_PROC_DATA_CUSTOM:
+ if (proc_data->data.special.read_proc) {
+ read_proc_t * read_proc = proc_data->data.special.read_proc;
+ len = read_proc(page, start, off, count, eof, data);
+ } else
+ len = 0;
+ break;
+ case SUSPEND_PROC_DATA_BIT:
+ len = sprintf(page, "%d\n",
+ -test_bit(proc_data->data.bit.bit,
+ proc_data->data.bit.bit_vector));
+ break;
+ case SUSPEND_PROC_DATA_INTEGER:
+ {
+ int * variable = proc_data->data.integer.variable;
+ len = sprintf(page, "%d\n", *variable);
+ break;
+ }
+ case SUSPEND_PROC_DATA_UL:
+ {
+ long * variable = proc_data->data.ul.variable;
+ len = sprintf(page, "%lu\n", *variable);
+ break;
+ }
+ case SUSPEND_PROC_DATA_STRING:
+ {
+ char * variable = proc_data->data.string.variable;
+ len = sprintf(page, "%s\n", variable);
+ break;
+ }
+ }
+ /* Side effect routine? */
+ if (proc_data->read_proc)
+ proc_data->read_proc();
+ if ((proc_data->type != SUSPEND_PROC_DATA_CUSTOM) || (!proc_data->data.special.read_proc))
+ *eof = 1;
+
+ suspend_finish_anything(0);
+
+ return len;
+}
+/* suspend2_write_proc
+ *
+ * Generic routine for handling writing to files representing
+ * bits, integers and unsigned longs.
+ */
+
+static int suspend2_write_proc(struct file *file, const char * buffer,
+ unsigned long count, void * data)
+{
+ struct suspend_proc_data * proc_data = (struct suspend_proc_data *) data;
+ char * my_buf = (char *) get_zeroed_page(GFP_ATOMIC);
+ int result = count, assigned_temp_buffer = 0;
+
+ if (!my_buf)
+ return -ENOMEM;
+
+ if (count > PAGE_SIZE)
+ count = PAGE_SIZE;
+
+ if (copy_from_user(my_buf, buffer, count))
+ return -EFAULT;
+
+ if (suspend_start_anything(proc_data == &proc_params[0]))
+ return -EBUSY;
+
+ my_buf[count] = 0;
+
+ switch (proc_data->type) {
+ case SUSPEND_PROC_DATA_CUSTOM:
+ if (proc_data->data.special.write_proc) {
+ write_proc_t * write_proc = proc_data->data.special.write_proc;
+ result = write_proc(file, buffer, count, data);
+ }
+ break;
+ case SUSPEND_PROC_DATA_BIT:
+ {
+ int value = simple_strtoul(my_buf, NULL, 0);
+ if (value)
+ set_bit(proc_data->data.bit.bit,
+ (proc_data->data.bit.bit_vector));
+ else
+ clear_bit(proc_data->data.bit.bit,
+ (proc_data->data.bit.bit_vector));
+ }
+ break;
+ case SUSPEND_PROC_DATA_INTEGER:
+ {
+ int * variable = proc_data->data.integer.variable;
+ int minimum = proc_data->data.integer.minimum;
+ int maximum = proc_data->data.integer.maximum;
+ *variable = simple_strtol(my_buf, NULL, 0);
+ if (((*variable) < minimum))
+ *variable = minimum;
+
+ if (((*variable) > maximum))
+ *variable = maximum;
+ break;
+ }
+ case SUSPEND_PROC_DATA_UL:
+ {
+ unsigned long * variable = proc_data->data.ul.variable;
+ unsigned long minimum = proc_data->data.ul.minimum;
+ unsigned long maximum = proc_data->data.ul.maximum;
+ *variable = simple_strtoul(my_buf, NULL, 0);
+
+ if (minimum && ((*variable) < minimum))
+ *variable = minimum;
+
+ if (maximum && ((*variable) > maximum))
+ *variable = maximum;
+ break;
+ }
+ break;
+ case SUSPEND_PROC_DATA_STRING:
+ {
+ int copy_len = count;
+ char * variable =
+ proc_data->data.string.variable;
+
+ if (proc_data->data.string.max_length &&
+ (copy_len > proc_data->data.string.max_length))
+ copy_len = proc_data->data.string.max_length;
+
+ if (!variable) {
+ proc_data->data.string.variable =
+ variable = (char *) get_zeroed_page(GFP_ATOMIC);
+ assigned_temp_buffer = 1;
+ }
+ strncpy(variable, my_buf, copy_len);
+ if ((copy_len) &&
+ (my_buf[copy_len - 1] == '\n'))
+ variable[count - 1] = 0;
+ variable[count] = 0;
+ }
+ break;
+ }
+ free_pages((unsigned long) my_buf, 0);
+ /* Side effect routine? */
+ if (proc_data->write_proc)
+ proc_data->write_proc();
+
+ /* Free temporary buffers */
+ if (assigned_temp_buffer) {
+ free_pages((unsigned long) proc_data->data.string.variable, 0);
+ proc_data->data.string.variable = NULL;
+ }
+
+ suspend_finish_anything(proc_data == &proc_params[0]);
+
+ return result;
+}
+
+/* Non-plugin proc entries.
+ *
+ * This array contains entries that are automatically registered at
+ * boot. Plugins and the console code register their own entries separately.
+ *
+ * NB: If you move do_suspend, change suspend2_write_proc's test so that
+ * suspend_start_anything still gets a 1 when the user echos > do_suspend!
+ */
+
+static struct suspend_proc_data proc_params[] = {
+ { .filename = "do_suspend",
+ .permissions = PROC_WRITEONLY,
+ .type = SUSPEND_PROC_DATA_CUSTOM,
+ .write_proc = __suspend2_try_suspend,
+ },
+
+ { .filename = "do_resume",
+ .permissions = PROC_WRITEONLY,
+ .type = SUSPEND_PROC_DATA_CUSTOM,
+ .write_proc = __suspend2_try_resume,
+ },
+
+
+ { .filename = "interface_version",
+ .permissions = PROC_READONLY,
+ .type = SUSPEND_PROC_DATA_INTEGER,
+ .data = {
+ .integer = {
+ .variable = &suspend_proc_version,
+ }
+ }
+ },
+};
+
+/* suspend_initialise_proc
+ *
+ * Initialise the /proc/software_suspend directory.
+ */
+
+static void suspend_initialise_proc(void)
+{
+ int i;
+ int numfiles = sizeof(proc_params) / sizeof(struct suspend_proc_data);
+
+ if (suspend_proc_initialised)
+ return;
+
+ suspend_dir = proc_mkdir("software_suspend", NULL);
+
+ BUG_ON(!suspend_dir);
+
+ INIT_LIST_HEAD(&suspend_proc_entries);
+
+ suspend_proc_initialised = 1;
+
+ for (i=0; i< numfiles; i++)
+ suspend_register_procfile(&proc_params[i]);
+}
+
+/* suspend_register_procfile
+ *
+ * Helper for registering a new /proc/software_suspend entry.
+ */
+
+struct proc_dir_entry * suspend_register_procfile(
+ struct suspend_proc_data * suspend_proc_data)
+{
+ struct proc_dir_entry * new_entry;
+
+ if (!suspend_proc_initialised)
+ suspend_initialise_proc();
+
+ new_entry = create_proc_entry(
+ suspend_proc_data->filename,
+ suspend_proc_data->permissions,
+ suspend_dir);
+ if (new_entry) {
+ list_add_tail(&suspend_proc_data->proc_data_list, &suspend_proc_entries);
+ new_entry->read_proc = suspend2_read_proc;
+ new_entry->write_proc = suspend2_write_proc;
+ new_entry->data = suspend_proc_data;
+ } else {
+ printk("Error! create_proc_entry returned NULL.\n");
+ INIT_LIST_HEAD(&suspend_proc_data->proc_data_list);
+ }
+ return new_entry;
+}
+
+/* suspend_unregister_procfile
+ *
+ * Helper for removing unwanted /proc/software_suspend entries.
+ *
+ */
+void suspend_unregister_procfile(struct suspend_proc_data * suspend_proc_data)
+{
+ if (list_empty(&suspend_proc_data->proc_data_list))
+ return;
+
+ remove_proc_entry(
+ suspend_proc_data->filename,
+ suspend_dir);
+ list_del(&suspend_proc_data->proc_data_list);
+}
diff -ruNp 617-proc.patch-old/kernel/power/suspend2_core/proc.h 617-proc.patch-new/kernel/power/suspend2_core/proc.h
--- 617-proc.patch-old/kernel/power/suspend2_core/proc.h 1970-01-01 10:00:00.000000000 +1000
+++ 617-proc.patch-new/kernel/power/suspend2_core/proc.h 2005-07-05 23:48:59.000000000 +1000
@@ -0,0 +1,66 @@
+/*
+ * kernel/power/proc.h
+ *
+ * Copyright (C) 2004-2005 Nigel Cunningham <nigel@suspend2.net>
+ *
+ * This file is released under the GPLv2.
+ *
+ * It provides declarations for suspend to use in managing
+ * /proc/software_suspend. When we switch to kobjects,
+ * this will become redundant.
+ *
+ */
+
+#include <linux/proc_fs.h>
+
+struct suspend_proc_data {
+ char * filename;
+ int permissions;
+ int type;
+ union {
+ struct {
+ unsigned long * bit_vector;
+ int bit;
+ } bit;
+ struct {
+ int * variable;
+ int minimum;
+ int maximum;
+ } integer;
+ struct {
+ unsigned long * variable;
+ unsigned long minimum;
+ unsigned long maximum;
+ } ul;
+ struct {
+ char * variable;
+ int max_length;
+ } string;
+ struct {
+ read_proc_t * read_proc;
+ write_proc_t * write_proc;
+ void * data;
+ } special;
+ } data;
+
+ /* Side effects routines. Used, eg, for reparsing the
+ * resume2 entry when it changes */
+ void (* read_proc) (void);
+ void (* write_proc) (void);
+ struct list_head proc_data_list;
+};
+
+#define SUSPEND_PROC_DATA_CUSTOM 0
+#define SUSPEND_PROC_DATA_BIT 1
+#define SUSPEND_PROC_DATA_INTEGER 2
+#define SUSPEND_PROC_DATA_UL 3
+#define SUSPEND_PROC_DATA_STRING 4
+
+#define PROC_WRITEONLY 0200
+#define PROC_READONLY 0400
+#define PROC_RW 0600
+
+struct proc_dir_entry * suspend_register_procfile(
+ struct suspend_proc_data * suspend_proc_data);
+void suspend_unregister_procfile(struct suspend_proc_data * suspend_proc_data);
+
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-07-06 05:50    [from the cache]
©2003-2014 Jasper Spaans. Advertise on this site