Messages in this thread | | | Date | Tue, 5 Jul 2005 19:03:25 +0200 | From | davide vecchio <> | Subject | Re: Problem with PS/2 Logitech WheelMouse |
| |
Hi Dimitry, I tried both options you suggested but noting changes ... the only strange thing I didn't notice before is : "input.c: calling hotplug without a hotplug agent defined " Any further idea ? Davide
On 7/5/05, Dmitry Torokhov <dmitry.torokhov@gmail.com> wrote: > On 7/5/05, davide vecchio <davide.vecchio@gmail.com> wrote: > > Hi everybody, > > I'm running SOME LINUX DISTROS (Fedora Core 2 kernel 2.6.7 and, Suse > > 9.3 kernel 2.6.10-4) on an Amd XP 1200 box on an msi 6360 MAINBOARD. > > I'm using a PS/2 Logitech WheelMouse (usb mouse connected using ps2 adapter). > > I'm experiencing on both distros that with the standard kernel (the > > one prebuilt coming with the distro), the mouse is working correctly > > but when I tried to compile a new kernel (2.6.11 or 2.6.22) got from > > the kernel.org site both using modules or static support for the mouse > > , the mouse stops working both in console (tested throught cat > > /dev/input/mice) and in X. > > > > Hi, > > I see that the mouse seem to be detected properly... I wonder if some > of the extended probes confuse it. Could you try doing: > > rmmod psmouse > insmod /lib/modules/`uname > -r`/kernel/drivers/input/mouse/psmouse.ko proto=bare > > and > > rmmod psmouse > insmod /lib/modules/`uname > -r`/kernel/drivers/input/mouse/psmouse.ko proto=imps > > And tell me if any of them work? > > Thanks! > > -- > Dmitry > Linux version 2.6.12.2-default (root@susepenguin) (gcc version 3.3.5 20050117 (prerelease) (SUSE Linux)) #1 Mon Jul 4 16:25:55 CEST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001bff0000 (usable) BIOS-e820: 000000001bff0000 - 000000001bff3000 (ACPI NVS) BIOS-e820: 000000001bff3000 - 000000001c000000 (ACPI data) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 447MB LOWMEM available. found SMP MP-table at 000f66c0 On node 0 totalpages: 114672 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 110576 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:1 DMI 2.2 present. ACPI: RSDP (v000 VIA694 ) @ 0x000f80c0 ACPI: RSDT (v001 VIA694 MSI ACPI 0x42302e31 AWRD 0x00000000) @ 0x1bff3000 ACPI: FADT (v001 VIA694 MSI ACPI 0x42302e31 AWRD 0x00000000) @ 0x1bff3040 ACPI: MADT (v001 VIA694 MSI ACPI 0x42302e31 AWRD 0x00000000) @ 0x1bff5880 ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:4 APIC version 16 ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. ACPI: IRQ11 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 1c000000 (gap: 1c000000:e3ff0000) Built 1 zonelists Kernel command line: root=/dev/hdb6 vga=0x317 selinux=0 splash=silent resume=/dev/hdb5 PROFILE=default runlevel 3 mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Initializing CPU#0 PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 1200.042 MHz processor. Using pmtmr for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 448756k/458688k available (2209k kernel code, 9364k reserved, 667k data, 216k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 2375.68 BogoMIPS (lpj=1187840) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0183fbff c1c7fbff 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0183fbff c1c7fbff 00000000 00000000 00000000 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 0183fbff c1c7fbff 00000000 00000020 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Athlon(tm) processor stepping 02 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=2 pin2=-1 checking if image is initramfs... it is Freeing initrd memory: 1907k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfb590, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050309 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *9 ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 12 devices PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca) apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1120589298.724:0): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API Applying VIA southbridge workaround. PCI: Enabling Via external APIC routing vesafb: framebuffer at 0xc0000000, mapped to 0xdc880000, using 3072k, total 131072k vesafb: mode is 1024x768x16, linelength=2048, pages=84 vesafb: protected mode interface info at c000:57cf vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize loop: loaded (max 8 devices) mice: PS/2 mouse device common for all mice input: PC Speaker md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 16384) NET: Registered protocol family 1 ACPI wakeup devices: SLPB PCI0 USB0 USB1 MODM UAR1 UAR2 LPT1 ACPI: (supports S0 S1 S4 S5) Freeing unused kernel memory: 216k freed input: AT Translated Set 2 keyboard on isa0060/serio0 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:07.1 PCI: Via IRQ fixup for 0000:00:07.1, from 255 to 0 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1 ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: IC35L060AVV207-0, ATA DISK drive hdb: MAXTOR 6L040J2, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: ATAPI DVD+RW 4X4X12, ATAPI CD/DVD-ROM drive hdd: LG CD-ROM CRD-8522B, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: 120103200 sectors (61492 MB) w/1821KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 hda13 > hdb: max request size: 128KiB hdb: 78177792 sectors (40027 MB) w/1818KiB Cache, CHS=65535/16/63, UDMA(100) hdb: cache flushes supported hdb: hdb1 hdb2 < hdb5 hdb6 > hdc: ATAPI 40X DVD-ROM CD-R/RW drive, 8192kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 hdd: ATAPI 52X CD-ROM drive, 128kB Cache, DMA ReiserFS: hdb6: found reiserfs format "3.6" with standard journal ReiserFS: hdb6: using ordered data mode ReiserFS: hdb6: journal params: device hdb6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hdb6: checking transaction log (hdb6) ReiserFS: hdb6: Using r5 hash to sort names md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. Adding 642556k swap on /dev/hda11. Priority:42 extents:1 Adding 899600k swap on /dev/hdb5. Priority:42 extents:1 device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com parport_pc: VIA 686A/8231 detected parport_pc: probing current configuration parport_pc: Current parallel port base: 0x378 parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] parport0: Printer, Canon BJC-2000 parport_pc: VIA parallel port: io=0x378, irq=7 lp0: using parport0 (interrupt-driven). cdrom: open failed. SCSI subsystem initialized Capability LSM initialized NET: Registered protocol family 10 Disabled Privacy Extensions on device c0394380(lo) IPv6 over IPv4 tunneling driver ip6_tables: (C) 2000-2002 Netfilter core team Disabled Privacy Extensions on device daab1400(sit0) ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack version 2.1 (3583 buckets, 28664 max) - 248 bytes per conntrack st: Version 20050312, fixed bufsize 32768, s/g segs 256 BIOS EDD facility v0.16 2004-Jun-25, 2 devices found cdrom: open failed. cdrom: open failed. ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:07.5[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 PCI: Via IRQ fixup for 0000:00:07.5, from 11 to 10 PCI: Setting latency timer of device 0000:00:07.5 to 64 ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] powernow-k8: Processor cpuid 642 not supported powernow: No powernow capabilities detected usbcore: registered new driver usbfs usbcore: registered new driver hub usbcore: registered new driver usbserial drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic usbcore: registered new driver usbserial_generic drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0 Non-volatile memory driver v1.2 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 input.c: calling hotplug without a hotplug agent defined input: PS/2 Generic Mouse on isa0060/serio1 input.c: calling hotplug without a hotplug agent defined psmouse: `imp/s2' invalid for parameter `proto' input.c: calling hotplug without a hotplug agent defined input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
| |