lkml.org 
[lkml]   [2005]   [Jul]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 2 errors in 2.6.12
Michal Semler <cijoml@volny.cz> wrote:
>
> I tested both - problem with SB Live! is fixed, but tuning problem in PV951
> still exist :(
>
>
> This is what I gets into dmesg:
>
>
> Linux video capture interface: v1.00
> bttv: driver version 0.9.15 loaded
> bttv: using 8 buffers with 2080k (520 pages) each for capture
> bttv: Bt8xx card found (0).
> ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [LNKH] -> GSI 9 (level, low) ->
> IRQ 9
> bttv0: Bt878 (rev 17) at 0000:01:0b.0, irq: 9, latency: 32, mmio: 0xb69fe000
> bttv0: using: ProVideo PV951 [card=42,insmod option]
> bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
> bttv0: using tuner=1
> bttv0: i2c: checking for TDA9875 @ 0xb0... not found
> bttv0: i2c: checking for TDA7432 @ 0x8a... not found
> tvaudio: TV audio decoder + audio/video mux driver
> tvaudio: known chips:
> tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6320,tea6420,tda8425,pic16c54
> (PV951),ta8874z
> tvaudio: found pic16c54 (PV951) @ 0x96
> bttv0: i2c: checking for TDA9887 @ 0x86... not found
> tuner: Unknown parameter `type'
> bttv0: registered device video0
> bttv0: registered device vbi0
> bttv0: registered device radio0
> bttv0: PLL: 28636363 => 35468950 .. ok
> ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
> PCI: setting IRQ 10 as level-triggered
> ACPI: PCI Interrupt 0000:01:0c.0[A] -> Link [LNKB] -> GSI 10 (level, low) ->
> IRQ 10

(cc the v4l list)

The above is with 2.6.13-rc4. 2.6.11 was OK.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-07-31 19:37    [from the cache]
©2003-2011 Jasper Spaans