lkml.org 
[lkml]   [2005]   [Jul]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] (REPOST/REVISION) disk quotas fail when /etc/mtab is symlinked to /proc/mounts
If /etc/mtab is a regular file all of the mount options (of a file 
system) are written to /etc/mtab by the mount command. The quota tools
look there for the quota strings for their operation. If, however,
/etc/mtab is a symlink to /proc/mounts (a "good thing" in some
environments) the tools don't write anything - they assume the kernel
will take care of things.

While the quota options are sent down to the kernel via the mount system
call and the file system codes handle them properly unfortunately there
is no code to echo the quota strings into /proc/mounts and the quota
tools fail in the symlink case.

The attached patchs modify the EXT[2|3] and JFS codes to add the
necessary hooks. The show_options function of each file system in these
patches currently deal with only those things that seemed related to
quotas; especially in the EXT3 case more can be done (later?).

Jan Kara also noted the difficulty in moving these changes above the FS
codes responding similarly to myself to Andrew's comment about possible
VFS migration. Issue summary:
- FS codes have to process the entire string of options anyway.
- Only FS codes that use quotas must have a show_options function
(for quotas to work properly) however quotas are only
used in a small number of FS.
- Since most of the quota using FS support other options these FS
codes should have the a show_options function to show those
options - and the quota echoing becomes virtually
negligible.

Based on feedback I have modified my patches from the original:
EXT3 always uses the show_options function even when QUOTA are not
compiled in
EXT[2|3] and JFS "quota" is treated as "usrquota"
EXT3 journalled data check for journalled quota removed
EXT[2|3] mount when quota specified but not compiled in
- no changes from my original patch. I tested the patch and the
codes warn but still
- mount. With all due respection I believe the comments otherwise
were a misread
- of the patch. Please reread/test and comment.
XFS patch removed - the XFS team already made the necessary changes
EXT3 mixing old and new quotas are handled differently (not purely
exclusive)
- if old and new are present together old is silently depricated
(compatability)
- mixing of old and new quotas is an error (e.g. usrjquota and
grpquota)

mark

Signed-off-by: Mark Bellon <mbellon@mvista.com>
diff -Naur linux-2.6.13-rc3-git9-orig/include/linux/ext3_fs.h linux-2.6.13-rc3-git9/include/linux/ext3_fs.h
--- linux-2.6.13-rc3-git9-orig/include/linux/ext3_fs.h 2005-07-28 15:12:52.000000000 -0700
+++ linux-2.6.13-rc3-git9/include/linux/ext3_fs.h 2005-07-28 16:18:24.000000000 -0700
@@ -373,6 +373,8 @@
#define EXT3_MOUNT_BARRIER 0x20000 /* Use block barriers */
#define EXT3_MOUNT_NOBH 0x40000 /* No bufferheads */
#define EXT3_MOUNT_QUOTA 0x80000 /* Some quota option set */
+#define EXT3_MOUNT_USRQUOTA 0x100000 /* "old" user quota */
+#define EXT3_MOUNT_GRPQUOTA 0x200000 /* "old" group quota */

/* Compatibility, for having both ext2_fs.h and ext3_fs.h included at once */
#ifndef _LINUX_EXT2_FS_H
diff -Naur linux-2.6.13-rc3-git9-orig/fs/ext3/super.c linux-2.6.13-rc3-git9/fs/ext3/super.c
--- linux-2.6.13-rc3-git9-orig/fs/ext3/super.c 2005-07-28 15:12:51.000000000 -0700
+++ linux-2.6.13-rc3-git9/fs/ext3/super.c 2005-07-29 10:00:38.000000000 -0700
@@ -35,6 +35,7 @@
#include <linux/mount.h>
#include <linux/namei.h>
#include <linux/quotaops.h>
+#include <linux/seq_file.h>
#include <asm/uaccess.h>
#include "xattr.h"
#include "acl.h"
@@ -509,8 +510,41 @@
kfree(rsv);
}

-#ifdef CONFIG_QUOTA
+static int ext3_show_options(struct seq_file *seq, struct vfsmount *vfs)
+{
+ struct ext3_sb_info *sbi = EXT3_SB(vfs->mnt_sb);
+
+ if (sbi->s_mount_opt & EXT3_MOUNT_JOURNAL_DATA)
+ seq_puts(seq, ",data=journal");
+
+ if (sbi->s_mount_opt & EXT3_MOUNT_ORDERED_DATA)
+ seq_puts(seq, ",data=ordered");
+
+ if (sbi->s_mount_opt & EXT3_MOUNT_WRITEBACK_DATA)
+ seq_puts(seq, ",data=writeback");
+
+#if defined(CONFIG_QUOTA)
+ if (sbi->s_jquota_fmt)
+ seq_printf(seq, ",jqfmt=%s",
+ (sbi->s_jquota_fmt == QFMT_VFS_OLD) ? "vfsold": "vfsv0");
+
+ if (sbi->s_qf_names[USRQUOTA])
+ seq_printf(seq, ",usrjquota=%s", sbi->s_qf_names[USRQUOTA]);
+
+ if (sbi->s_qf_names[GRPQUOTA])
+ seq_printf(seq, ",grpjquota=%s", sbi->s_qf_names[GRPQUOTA]);
+
+ if (sbi->s_mount_opt & EXT3_MOUNT_USRQUOTA)
+ seq_puts(seq, ",usrquota");
+
+ if (sbi->s_mount_opt & EXT3_MOUNT_GRPQUOTA)
+ seq_puts(seq, ",grpquota");
+#endif

+ return 0;
+}
+
+#ifdef CONFIG_QUOTA
#define QTYPE2NAME(t) ((t)==USRQUOTA?"user":"group")
#define QTYPE2MOPT(on, t) ((t)==USRQUOTA?((on)##USRJQUOTA):((on)##GRPJQUOTA))

@@ -569,6 +603,7 @@
.statfs = ext3_statfs,
.remount_fs = ext3_remount,
.clear_inode = ext3_clear_inode,
+ .show_options = ext3_show_options,
#ifdef CONFIG_QUOTA
.quota_read = ext3_quota_read,
.quota_write = ext3_quota_write,
@@ -590,7 +625,8 @@
Opt_abort, Opt_data_journal, Opt_data_ordered, Opt_data_writeback,
Opt_usrjquota, Opt_grpjquota, Opt_offusrjquota, Opt_offgrpjquota,
Opt_jqfmt_vfsold, Opt_jqfmt_vfsv0, Opt_quota, Opt_noquota,
- Opt_ignore, Opt_barrier, Opt_err, Opt_resize,
+ Opt_ignore, Opt_barrier, Opt_err, Opt_resize, Opt_usrquota,
+ Opt_grpquota
};

static match_table_t tokens = {
@@ -634,10 +670,10 @@
{Opt_grpjquota, "grpjquota=%s"},
{Opt_jqfmt_vfsold, "jqfmt=vfsold"},
{Opt_jqfmt_vfsv0, "jqfmt=vfsv0"},
- {Opt_quota, "grpquota"},
+ {Opt_grpquota, "grpquota"},
{Opt_noquota, "noquota"},
{Opt_quota, "quota"},
- {Opt_quota, "usrquota"},
+ {Opt_usrquota, "usrquota"},
{Opt_barrier, "barrier=%u"},
{Opt_err, NULL},
{Opt_resize, "resize"},
@@ -903,7 +939,13 @@
sbi->s_jquota_fmt = QFMT_VFS_V0;
break;
case Opt_quota:
+ case Opt_usrquota:
set_opt(sbi->s_mount_opt, QUOTA);
+ set_opt(sbi->s_mount_opt, USRQUOTA);
+ break;
+ case Opt_grpquota:
+ set_opt(sbi->s_mount_opt, QUOTA);
+ set_opt(sbi->s_mount_opt, GRPQUOTA);
break;
case Opt_noquota:
if (sb_any_quota_enabled(sb)) {
@@ -912,8 +954,13 @@
return 0;
}
clear_opt(sbi->s_mount_opt, QUOTA);
+ clear_opt(sbi->s_mount_opt, USRQUOTA);
+ clear_opt(sbi->s_mount_opt, GRPQUOTA);
break;
#else
+ case Opt_quota:
+ case Opt_usrquota:
+ case Opt_grpquota:
case Opt_usrjquota:
case Opt_grpjquota:
case Opt_offusrjquota:
@@ -924,7 +971,6 @@
"EXT3-fs: journalled quota options not "
"supported.\n");
break;
- case Opt_quota:
case Opt_noquota:
break;
#endif
@@ -962,11 +1008,41 @@
}
}
#ifdef CONFIG_QUOTA
- if (!sbi->s_jquota_fmt && (sbi->s_qf_names[USRQUOTA] ||
- sbi->s_qf_names[GRPQUOTA])) {
- printk(KERN_ERR
+ if (sbi->s_qf_names[USRQUOTA] || sbi->s_qf_names[GRPQUOTA]) {
+ if ((sbi->s_mount_opt & EXT3_MOUNT_USRQUOTA) &&
+ sbi->s_qf_names[USRQUOTA]) {
+ clear_opt(sbi->s_mount_opt, USRQUOTA);
+ }
+
+ if ((sbi->s_mount_opt & EXT3_MOUNT_GRPQUOTA) &&
+ sbi->s_qf_names[GRPQUOTA]) {
+ clear_opt(sbi->s_mount_opt, GRPQUOTA);
+ }
+
+ if ((sbi->s_qf_names[USRQUOTA] &&
+ (sbi->s_mount_opt & EXT3_MOUNT_GRPQUOTA)) ||
+ (sbi->s_qf_names[GRPQUOTA] &&
+ (sbi->s_mount_opt & EXT3_MOUNT_USRQUOTA))) {
+ printk(KERN_ERR
+ "EXT3-fs: old and new quota format mixing.\n");
+
+ return 0;
+ }
+
+ if (!sbi->s_jquota_fmt) {
+ printk(KERN_ERR
"EXT3-fs: journalled quota format not specified.\n");
- return 0;
+
+ return 0;
+ }
+ }
+ else {
+ if (sbi->s_jquota_fmt) {
+ printk(KERN_ERR
+"EXT3-fs: journalled quota format specified with no journalling enabled.\n");
+
+ return 0;
+ }
}
#endif

diff -Naur linux-2.6.13-rc3-git9-orig/include/linux/ext2_fs.h linux-2.6.13-rc3-git9/include/linux/ext2_fs.h
--- linux-2.6.13-rc3-git9-orig/include/linux/ext2_fs.h 2005-07-28 15:12:52.000000000 -0700
+++ linux-2.6.13-rc3-git9/include/linux/ext2_fs.h 2005-07-28 15:35:31.000000000 -0700
@@ -313,6 +313,9 @@
#define EXT2_MOUNT_XATTR_USER 0x004000 /* Extended user attributes */
#define EXT2_MOUNT_POSIX_ACL 0x008000 /* POSIX Access Control Lists */
#define EXT2_MOUNT_XIP 0x010000 /* Execute in place */
+#define EXT2_MOUNT_USRQUOTA 0x020000 /* user quota */
+#define EXT2_MOUNT_GRPQUOTA 0x040000 /* group quota */
+

#define clear_opt(o, opt) o &= ~EXT2_MOUNT_##opt
#define set_opt(o, opt) o |= EXT2_MOUNT_##opt
diff -Naur linux-2.6.13-rc3-git9-orig/fs/ext2/super.c linux-2.6.13-rc3-git9/fs/ext2/super.c
--- linux-2.6.13-rc3-git9-orig/fs/ext2/super.c 2005-07-28 15:12:51.000000000 -0700
+++ linux-2.6.13-rc3-git9/fs/ext2/super.c 2005-07-29 10:06:47.000000000 -0700
@@ -19,6 +19,7 @@
#include <linux/config.h>
#include <linux/module.h>
#include <linux/string.h>
+#include <linux/fs.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/blkdev.h>
@@ -27,6 +28,8 @@
#include <linux/buffer_head.h>
#include <linux/smp_lock.h>
#include <linux/vfs.h>
+#include <linux/seq_file.h>
+#include <linux/mount.h>
#include <asm/uaccess.h>
#include "ext2.h"
#include "xattr.h"
@@ -204,6 +207,19 @@
#ifdef CONFIG_QUOTA
static ssize_t ext2_quota_read(struct super_block *sb, int type, char *data, size_t len, loff_t off);
static ssize_t ext2_quota_write(struct super_block *sb, int type, const char *data, size_t len, loff_t off);
+
+static int ext2_show_options(struct seq_file *seq, struct vfsmount *vfs)
+{
+ struct ext2_sb_info *sbi = EXT2_SB(vfs->mnt_sb);
+
+ if (sbi->s_mount_opt & EXT2_MOUNT_USRQUOTA)
+ seq_puts(seq, ",usrquota");
+
+ if (sbi->s_mount_opt & EXT2_MOUNT_GRPQUOTA)
+ seq_puts(seq, ",grpquota");
+
+ return 0;
+}
#endif

static struct super_operations ext2_sops = {
@@ -221,6 +237,7 @@
#ifdef CONFIG_QUOTA
.quota_read = ext2_quota_read,
.quota_write = ext2_quota_write,
+ .show_options = ext2_show_options
#endif
};

@@ -256,10 +273,11 @@

enum {
Opt_bsd_df, Opt_minix_df, Opt_grpid, Opt_nogrpid,
- Opt_resgid, Opt_resuid, Opt_sb, Opt_err_cont, Opt_err_panic, Opt_err_ro,
- Opt_nouid32, Opt_check, Opt_nocheck, Opt_debug, Opt_oldalloc, Opt_orlov, Opt_nobh,
- Opt_user_xattr, Opt_nouser_xattr, Opt_acl, Opt_noacl, Opt_xip,
- Opt_ignore, Opt_err,
+ Opt_resgid, Opt_resuid, Opt_sb, Opt_err_cont, Opt_err_panic,
+ Opt_err_ro, Opt_nouid32, Opt_check, Opt_nocheck, Opt_debug,
+ Opt_oldalloc, Opt_orlov, Opt_nobh, Opt_user_xattr, Opt_nouser_xattr,
+ Opt_acl, Opt_noacl, Opt_xip, Opt_ignore, Opt_err, Opt_quota,
+ Opt_usrquota, Opt_grpquota
};

static match_table_t tokens = {
@@ -288,10 +306,10 @@
{Opt_acl, "acl"},
{Opt_noacl, "noacl"},
{Opt_xip, "xip"},
- {Opt_ignore, "grpquota"},
+ {Opt_grpquota, "grpquota"},
{Opt_ignore, "noquota"},
- {Opt_ignore, "quota"},
- {Opt_ignore, "usrquota"},
+ {Opt_quota, "quota"},
+ {Opt_usrquota, "usrquota"},
{Opt_err, NULL}
};

@@ -406,6 +424,26 @@
printk("EXT2 xip option not supported\n");
#endif
break;
+
+#if defined(CONFIG_QUOTA)
+ case Opt_quota:
+ case Opt_usrquota:
+ set_opt(sbi->s_mount_opt, USRQUOTA);
+ break;
+
+ case Opt_grpquota:
+ set_opt(sbi->s_mount_opt, GRPQUOTA);
+ break;
+#else
+ case Opt_quota:
+ case Opt_usrquota:
+ case Opt_grpquota:
+ printk(KERN_ERR
+ "EXT2-fs: quota operations not supported.\n");
+
+ break;
+#endif
+
case Opt_ignore:
break;
default:
diff -Naur linux-2.6.13-rc3-git9-orig/fs/jfs/jfs_filsys.h linux-2.6.13-rc3-git9/fs/jfs/jfs_filsys.h
--- linux-2.6.13-rc3-git9-orig/fs/jfs/jfs_filsys.h 2005-07-15 14:18:57.000000000 -0700
+++ linux-2.6.13-rc3-git9/fs/jfs/jfs_filsys.h 2005-07-28 15:36:00.000000000 -0700
@@ -37,6 +37,9 @@
#define JFS_ERR_CONTINUE 0x00000004 /* continue */
#define JFS_ERR_PANIC 0x00000008 /* panic */

+#define JFS_USRQUOTA 0x00000010
+#define JFS_GRPQUOTA 0x00000020
+
/* platform option (conditional compilation) */
#define JFS_AIX 0x80000000 /* AIX support */
/* POSIX name/directory support */
diff -Naur linux-2.6.13-rc3-git9-orig/fs/jfs/super.c linux-2.6.13-rc3-git9/fs/jfs/super.c
--- linux-2.6.13-rc3-git9-orig/fs/jfs/super.c 2005-07-28 15:12:51.000000000 -0700
+++ linux-2.6.13-rc3-git9/fs/jfs/super.c 2005-07-29 10:07:06.000000000 -0700
@@ -23,9 +23,11 @@
#include <linux/parser.h>
#include <linux/completion.h>
#include <linux/vfs.h>
+#include <linux/mount.h>
#include <linux/moduleparam.h>
#include <linux/posix_acl.h>
#include <asm/uaccess.h>
+#include <linux/seq_file.h>

#include "jfs_incore.h"
#include "jfs_filsys.h"
@@ -190,7 +192,8 @@

enum {
Opt_integrity, Opt_nointegrity, Opt_iocharset, Opt_resize,
- Opt_resize_nosize, Opt_errors, Opt_ignore, Opt_err,
+ Opt_resize_nosize, Opt_errors, Opt_ignore, Opt_err, Opt_quota,
+ Opt_usrquota, Opt_grpquota
};

static match_table_t tokens = {
@@ -291,6 +294,24 @@
}
break;
}
+
+#if defined(CONFIG_QUOTA)
+ case Opt_quota:
+ case Opt_usrquota:
+ *flag |= JFS_USRQUOTA;
+ break;
+ case Opt_grpquota:
+ *flag |= JFS_GRPQUOTA;
+ break;
+#else
+ case Opt_usrquota:
+ case Opt_grpquota:
+ case Opt_quota:
+ printk(KERN_ERR
+ "JFS: quota operations not supported\n");
+ break;
+#endif
+
default:
printk("jfs: Unrecognized mount option \"%s\" "
" or missing value\n", p);
@@ -537,6 +558,21 @@
return 0;
}

+#if defined(CONFIG_QUOTA)
+static int jfs_show_options(struct seq_file *seq, struct vfsmount *vfs)
+{
+ struct jfs_sb_info *sbi = JFS_SBI(vfs->mnt_sb);
+
+ if (sbi->flag & JFS_USRQUOTA)
+ seq_puts(seq, ",usrquota");
+
+ if (sbi->flag & JFS_GRPQUOTA)
+ seq_puts(seq, ",grpquota");
+
+ return 0;
+}
+#endif
+
static struct super_operations jfs_super_operations = {
.alloc_inode = jfs_alloc_inode,
.destroy_inode = jfs_destroy_inode,
@@ -550,6 +586,9 @@
.unlockfs = jfs_unlockfs,
.statfs = jfs_statfs,
.remount_fs = jfs_remount,
+#if defined(CONFIG_QUOTA)
+ .show_options = jfs_show_options
+#endif
};

static struct export_operations jfs_export_operations = {
\
 
 \ /
  Last update: 2005-07-29 19:30    [W:1.014 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site