lkml.org 
[lkml]   [2005]   [Jul]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[2.6.13 PATCH 2/4] 02-lgdt3302-rf-input.patch
Michael Krufky wrote:

> This patch series spans both video4linux and linux-dvb trees.
> Remove the dvb_pll_desc from the lgdt3302 frontend and replace with a
> pll_set-callback to isolate the tuner programming from the frontend.
>
> Select the RF input connector based upon the type of demodulation
> selected. ANT RF connector is selected for 8-VSB and CABLE RF
> connector is selected for QAM64/QAM256. Implement this along the lines
> posted to linux-dvb list (subscribers only) by Patrick Boettcher. (
> http://linuxtv.org/pipermail/linux-dvb/2005-July/003557.html ) This
> only affects the cards that use the Microtune 4042 tuner. This is not
> ideal, but there is no current specification for selecting RF inputs.
> It makes the card work the same way as the Windows driver thus it may
> reduce user confusion.
>


Select the RF input connector based upon the type of
demodulation selected. ANT RF connector is selected for
8-VSB and CABLE RF connector is selected for QAM64/QAM256.
This only affects the cards that use the Microtune 4042 tuner.

Signed-off-by: Mac Michaels <wmichaels1@earthlink.net>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>

linux/drivers/media/dvb/frontends/lgdt3302.c | 12 +++++++++++
linux/drivers/media/dvb/frontends/lgdt3302.h | 1
linux/drivers/media/video/cx88/cx88-dvb.c | 20 +++++++++++++++++--
3 files changed, 31 insertions(+), 2 deletions(-)

diff -u linux-2.6.13/drivers/media/dvb/frontends/lgdt3302.c linux/drivers/media/dvb/frontends/lgdt3302.c
--- linux-2.6.13/drivers/media/dvb/frontends/lgdt3302.c 2005-07-20 22:50:39.000000000 +0000
+++ linux/drivers/media/dvb/frontends/lgdt3302.c 2005-07-20 22:53:29.000000000 +0000
@@ -214,6 +214,10 @@

/* Select VSB mode and serial MPEG interface */
top_ctrl_cfg[1] = 0x07;
+
+ /* Select ANT connector if supported by card */
+ if (state->config->pll_rf_set)
+ state->config->pll_rf_set(fe, 1);
break;

case QAM_64:
@@ -221,6 +225,10 @@

/* Select QAM_64 mode and serial MPEG interface */
top_ctrl_cfg[1] = 0x04;
+
+ /* Select CABLE connector if supported by card */
+ if (state->config->pll_rf_set)
+ state->config->pll_rf_set(fe, 0);
break;

case QAM_256:
@@ -228,6 +236,10 @@

/* Select QAM_256 mode and serial MPEG interface */
top_ctrl_cfg[1] = 0x05;
+
+ /* Select CABLE connector if supported by card */
+ if (state->config->pll_rf_set)
+ state->config->pll_rf_set(fe, 0);
break;
default:
printk(KERN_WARNING "lgdt3302: %s: Modulation type(%d) UNSUPPORTED\n", __FUNCTION__, param->u.vsb.modulation);
diff -u linux-2.6.13/drivers/media/dvb/frontends/lgdt3302.h linux/drivers/media/dvb/frontends/lgdt3302.h
--- linux-2.6.13/drivers/media/dvb/frontends/lgdt3302.h 2005-07-20 22:50:39.000000000 +0000
+++ linux/drivers/media/dvb/frontends/lgdt3302.h 2005-07-20 22:53:29.000000000 +0000
@@ -30,6 +30,7 @@
u8 demod_address;

/* PLL interface */
+ int (*pll_rf_set) (struct dvb_frontend* fe, int index);
int (*pll_set)(struct dvb_frontend* fe, struct dvb_frontend_parameters* params, u8* pll_address);

/* Need to set device param for start_dma */
diff -u linux-2.6.13/drivers/media/video/cx88/cx88-dvb.c linux/drivers/media/video/cx88/cx88-dvb.c
--- linux-2.6.13/drivers/media/video/cx88/cx88-dvb.c 2005-07-20 22:50:39.000000000 +0000
+++ linux/drivers/media/video/cx88/cx88-dvb.c 2005-07-20 22:53:29.000000000 +0000
@@ -1,5 +1,5 @@
/*
- * $Id: cx88-dvb.c,v 1.47 2005/07/20 05:20:37 mkrufky Exp $
+ * $Id: cx88-dvb.c,v 1.48 2005/07/20 05:33:33 mkrufky Exp $
*
* device driver for Conexant 2388x based TV cards
* MPEG Transport Stream (DVB) routines
@@ -223,6 +223,19 @@
return 0;
}

+static int lgdt3302_pll_rf_set(struct dvb_frontend* fe, int index)
+{
+ struct cx8802_dev *dev= fe->dvb->priv;
+ struct cx88_core *core = dev->core;
+
+ dprintk(1, "%s: index = %d\n", __FUNCTION__, index);
+ if (index == 0)
+ cx_clear(MO_GP0_IO, 8);
+ else
+ cx_set(MO_GP0_IO, 8);
+ return 0;
+}
+
static int lgdt3302_set_ts_param(struct dvb_frontend* fe, int is_punctured)
{
struct cx8802_dev *dev= fe->dvb->priv;
@@ -296,8 +309,11 @@

cx_clear(MO_GP0_IO, 1);
mdelay(100);
- cx_set(MO_GP0_IO, 9); // ANT connector too FIXME
+ cx_set(MO_GP0_IO, 1);
mdelay(200);
+
+ /* Select RF connector callback */
+ fusionhdtv_3_gold.pll_rf_set = lgdt3302_pll_rf_set;
dev->core->pll_addr = 0x61;
dev->core->pll_desc = &dvb_pll_microtune_4042;
dev->dvb.frontend = lgdt3302_attach(&fusionhdtv_3_gold,
\
 
 \ /
  Last update: 2005-07-21 06:25    [W:0.051 / U:0.588 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site