lkml.org 
[lkml]   [2005]   [Jul]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: init 0 stopped working
Hi,

On 7/16/05, Martin Mokrejs <mmokrejs@ribosome.natur.cuni.cz> wrote:
> Hi,
> I used to shutdown my P4 machine based on ASUS P4C800E-Deluxe
> with simple "init 0" command. That somehow broke between 2.6.12-rc6-git2
> and 2.6.13-rc1. The machines makes the sound like shutdown but it
> immediately turns the power on again. I used acpi and the kernel
> configs should be almost identical in all cases, as I just recopy
> previously used .config and run "make oldconfig".
>
> Any clues? I still happens even with 2.6.13-rc3-git2.
> Please Cc: me in replies.
> Martin


I have the same problem.
System: Debian 3.1
Hardware:
motherboard P4P800 (with bios 1019)

It may be problem around acpi in asus board. But 2.6.12.1 works good.

Regards,
Michal Piotrowski
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-07-16 20:38    [from the cache]
©2003-2011 Jasper Spaans. Advertise on this site