lkml.org 
[lkml]   [2005]   [Jul]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] i386: Selectable Frequency of the Timer Interrupt
Theodore Ts'o wrote:
> On Mon, Jul 11, 2005 at 02:23:08PM +0100, Alan Cox wrote:
>
>>>>Because some machines exhibit appreciable latency in entering low power
>>>>state via ACPI, and 1000Hz reduces their battery life. By about half,
>>>>iirc.
>>>>
>>>
>>>Then the owners of such machines can use HZ=250 and leave the default
>>>alone. Why should everyone have to bear the cost?
>>
>>They need 100 really it seems, 250-500 have no real effect and on the
>>Dell I tried 250 didn't stop the wild clock slew from the APM bios
>>either. I played with this a fair bit on a couple of laptops. I've not
>>seen anything > 20% saving however so I've no idea who/why someone saw
>>50%
>
>
> The real answer here is for the tickless patches to cleaned up to the
> point where they can be merged, and then we won't waste battery power
> entering the timer interrupt in the first place. :-)

And that does seem to be the long term solution. Most (not all) modern
hardware has a readable timer as accurate as the tick, so doing a timer
to clock conversion as needed would be possible.

Unfortunately the interest in tickless operation seems to be mostly in
the power saving possibilities of laptops. If you could make it part of
some really sexy high interest area, like real time premption, it might
get done sooner ;-)

--
-bill davidsen (davidsen@tmr.com)
"The secret to procrastination is to put things off until the
last possible moment - but no longer" -me
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-07-13 18:01    [W:0.135 / U:0.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site