lkml.org 
[lkml]   [2005]   [Jun]   [9]   [last100]   RSS Feed
Views: [more markup]  [less markup]  [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [patch] Real-Time Preemption, -RT-2.6.12-rc6-V0.7.48-00
From"Serge Noiraud" <>
DateThu, 09 Jun 2005 17:12:48 +0200
Le jeu 09/06/2005 à 13:55, Ingo Molnar a écrit :
> * Serge Noiraud <serge.noiraud@bull.net> wrote:
> 
> > > # CONFIG_DEBUG_RT_LOCKING_MODE is not set
> > > 
> > > it seems to work fine. With the above enabled it hangs on both of my SMP 
> > > systems as described above. :-/
> > 
> > Same problem here. OK unsetting the CONFIG_DEBUG_RT_LOCKING_MODE.
> 
> this one should be fixed in the latest patch. (note that when 
> DEBUG_RT_LOCKING_MODE is set the spinlocks/rwlocks default to 
> non-preemptible. You can set preemption it via 
> /proc/sys/kernel/preempt_locks. You normally dont want to enable this 
> option.)
> 
> > I have another problem :
> > I can't boot. 
> 
> could you try the latest (-48-03) patch? I fixed a couple of things that 
> might impact SMP booting.
> 
> > ...trying to set up timer (IRQ0) through the 8259A ...  failed.
> > ...trying to set up timer as Virtual Wire IRQ...  <======= freeze
> > 
Same problem with 48-04 and 48-05
It works great with rc6 without RT patch.
Here is my .config
The cmdline options at boot time are :
#more /proc/cmdline
BOOT_IMAGE=2.6.12rc6RTV0.7.4805 ro root=306 console=ttyS0 console=tty1 \
acpi=force apm=smp resume=/dev/hda5

attached : gunzip -c /proc/config.gz

[unhandled content-type:application/x-gzip]
\
 
 \ /
  Last update: 2005-06-09 15:31    [from the cache]
©2003-2008