lkml.org 
[lkml]   [2005]   [Jun]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Kernel 2.6.12-rc6-mm1 & Chelsio driver
Lukas,

I had to investigate the driver a bit and I am mistaken in saying that the NIC
driver will support the T110 card. It does not.

The reason for this is that the T110 will use the TCAM even in NIC mode and that
code is missing from the NIC driver. The TCAM needs to be initialized for using
TCP traffic in tunneled (non-offload) mode. However, if you just add the
enumeration for the T110, UDP should work but TCP will not. This would not be
very useful.

The T210 does not have this issue.

Unfortunately, you will need to use the TOE driver for 2.6.6 kernel.

I apologize for the confusion.

-Scott

Lukas Hejtmanek wrote:
> On Wed, Jun 08, 2005 at 12:11:59PM -0700, Scott Bardone wrote:
>
>>You would need to use the cxgb-2.1.1 driver (NIC only). It is near the
>>bottom of the webpage, under "Chelsio N210 / N110 10Gb Ethernet Server
>>Adapter", Chelsio N210 / N110 Linux Driver - Version 2.1.1 (05/17/2005).
>><https://service.chelsio.com/drivers/linux/n210/cxgb-2.1.1.tar.gz>
>>Use the above driver for the T110 in NIC mode. This driver will work for
>>the T110 and T210 but only in NIC mode.
>
>
> Unfortunately, this driver does not contain
> CH_DEVICE(6, 0|1.. )
>
> Should I just add it?
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-06-08 22:05    [W:8.451 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site