![]() | |||||||||||||
Messages in this thread |
Hi Brice,
What is your X configuration ? The default parameters are ok for a
VideoRam parameter up to 32MB. Could you check two things, please ?
- First, could you set VideoRam to 32MB in your X conf.
- Second, could you set it to 64MB and use a voffset=64 parameter
for intelfb.
Thanks
Sylvain
Brice Goglin a écrit:
>Andrew Morton a écrit :
>
>
>>Brice Goglin <Brice.Goglin@ens-lyon.org> wrote:
>>
>>
>>
>>>Andrew Morton a écrit :
>>>
>>>
>>>
>>>>Lots of USB problems, quite a few input problems. fbdev, ACPI, ATAPI. All
>>>>the usual suspects.
>>>>
>>>>Subject: intelfb crash on i845
>>>>Subject: Re: [Linux-fbdev-devel] intelfb crash on i845
>>>>
>>>>
>>>These two entries seem to be the same one, from me.
>>>Sylvain Meyer was working on it. And I've recently seen some patches
>>>
>>>
>>>from him on the mm-commit list. I didn't have time to test them but I
>>
>>
>>>should be able to try next week (especially if a new -mm is released
>>>soon).
>>>
>>>
>
>Hi Andrew,
>
>I just tried with rc6-mm1 and the problem is still present:
>when the onboard video memory is set to 1MB in the BIOS, switching from
>X to VT1 gives a dirty framebuffer console (no text, just wrong colors).
>Setting memory to 8MB in the BIOS makes all this work.
>
>Brice
>
>
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
| ||||||||||||
| Last update: 2005-06-07 16:01 [from the cache] ©2003-2008 | |||||||||||||