lkml.org 
[lkml]   [2005]   [Jun]   [24]   [last100]   RSS Feed
Views: [more markup]  [less markup]  [headers]  [forward] 
 
Messages in this thread
/
DateFri, 24 Jun 2005 16:55:57 -0400 (EDT)
FromJustin Piszcz <>
SubjectPromise ATA/133 Errors With 2.6.10+
I have two different machines with the 7200.8 Seagate 8MB 400GB drives.

Both have ATA/133 controllers, the error is the same on both:

Jun 24 15:24:18 localhost kernel: hde: no DRQ after issuing MULTWRITE_EXT

I put the drive on an (older) Promise ATA/100 controller = works great!
I put the drive on the second box on the motherboard IDE interface = works 
great!

What happened > 2.6.10 to the promise driver?
??

Jun 24 15:24:18 localhost kernel: PDC202XX: Primary channel reset.
Jun 24 15:24:18 localhost kernel: hde: timeout waiting for DMA
Jun 24 15:24:18 localhost kernel: hde: status error: status=0x58 { 
DriveReady SeekComplete DataRequest }
Jun 24 15:24:18 localhost kernel:
Jun 24 15:24:18 localhost kernel: ide: failed opcode was: unknown
Jun 24 15:24:18 localhost kernel: hde: drive not ready for command
Jun 24 15:24:18 localhost kernel: hde: status timeout: status=0xd0 { Busy 
}
Jun 24 15:24:18 localhost kernel:
Jun 24 15:24:18 localhost kernel: ide: failed opcode was: unknown
Jun 24 15:24:18 localhost kernel: PDC202XX: Primary channel reset.
Jun 24 15:24:18 localhost kernel: hde: no DRQ after issuing MULTWRITE_EXT
Jun 24 15:24:18 localhost kernel: ide2: reset: success
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-06-24 21:09    [W:0.297 / U:0.490 seconds]
©2003-2008 Jasper Spaans