Messages in this thread | | | Date | Thu, 23 Jun 2005 15:53:18 +0200 | From | Jens Axboe <> | Subject | SMP+irq handling broken in current git? |
| |
Hi,
Something strange is going on with current git as of this morning (head ee98689be1b054897ff17655008c3048fe88be94). On an old test box (dual p3 800MHz), using the same old config I always do on this box has very broken interrupt handling:
[...]
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller at PCI slot 0000:00:04.1 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:pio hda: QUANTUM FIREBALLP AS40.0, ATA DISK drive hdb: IOMEGA DVDRW8824E2Q-D, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: IBM-DTLA-307030, ATA DISK drive ide1 at 0x170-0x177,0x376 on irq 15 irq 14: nobody cared! [<c01039e7>] dump_stack+0x17/0x20 [<c0134ec7>] __report_bad_irq+0x27/0x90 [<c0134fd2>] note_interrupt+0x72/0x90 [<c01349cb>] __do_IRQ+0x11b/0x130 [<c0104f9c>] do_IRQ+0x1c/0x30 [<c01034ca>] common_interrupt+0x1a/0x20 [<c0100a9c>] cpu_idle+0x6c/0x80 [<c040c97a>] start_kernel+0x14a/0x170 [<c010020e>] 0xc010020e handlers: [<c02d12b0>] (ide_intr+0x0/0x150) Disabling IRQ #14 irq 15: nobody cared! [<c01039e7>] dump_stack+0x17/0x20 [<c0134ec7>] __report_bad_irq+0x27/0x90 [<c0134fd2>] note_interrupt+0x72/0x90 [<c01349cb>] __do_IRQ+0x11b/0x130 [<c0104f9c>] do_IRQ+0x1c/0x30 [<c01034ca>] common_interrupt+0x1a/0x20 [<c0100a9c>] cpu_idle+0x6c/0x80 [<c040c97a>] start_kernel+0x14a/0x170 [<c010020e>] 0xc010020e handlers: [<c02d12b0>] (ide_intr+0x0/0x150) Disabling IRQ #15 hda: max request size: 128KiB hda: lost interrupt hda: lost interrupt hda: 78177792 sectors (40027 MB) w/1902KiB Cache, CHS=65535/16/63, UDMA(33) hda: cache flushes not supported hda:<4>hda: dma_timer_expiry: dma status == 0x64 hda: DMA interrupt recovery hda: lost interrupt hda1 hda2 hda3 hda4 hdc: max request size: 128KiB irq 14: nobody cared! [<c01039e7>] dump_stack+0x17/0x20 [<c0134ec7>] __report_bad_irq+0x27/0x90 [<c0134fd2>] note_interrupt+0x72/0x90 [<c01349cb>] __do_IRQ+0x11b/0x130 [<c0104f9c>] do_IRQ+0x1c/0x30 [<c01034ca>] common_interrupt+0x1a/0x20 [<c0100a9c>] cpu_idle+0x6c/0x80 [<c040c97a>] start_kernel+0x14a/0x170 [<c010020e>] 0xc010020e handlers: [<c02d12b0>] (ide_intr+0x0/0x150) Disabling IRQ #14 hdc: lost interrupt
Going to UP makes it work just fine for me. Does anyone know what is going on here?!
-- Jens Axboe
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |