Messages in this thread | | | Subject | RE: PCMCIA: Statically linked CF card driver? | Date | Thu, 23 Jun 2005 12:00:44 +0200 | From | "kus Kusche Klaus" <> |
| |
> From: Dominik Brodowski [mailto:linux@dominikbrodowski.net] > Hi, > > - use 2.6.12-mm1, and build all you need into the kernel > - in drivers/pcmcia/ds.c , remove the following block: > > /* also, FUNC_ID matching needs to be > activated by userspace > * after it has re-checked that there is no > possible module > * with a prod_id/manf_id/card_id match. > */ > if (!dev->allow_func_id_match) > return 0; > > - it should(tm) work then... though I haven't and can't try it myself.
Thanks, I'll try it.
> > * Any chance to boot from it? > > > * It would be nice to be able to replace the CF > > without rebooting. > > I'm not sure whether these two aspects exclude each other.
We don't need them at the same time:
* Usually, the system boots from flash, and the CF is used for data transfer (and hence should be changeable).
* In case of emergency (when the system in flash got messed up), or for the first-time flash, it would be nice to be able to boot from CF. In that case, the CF will not be removed in flight!
-- Klaus Kusche (Software Development - Control Systems) KEBA AG Gewerbepark Urfahr, A-4041 Linz, Austria (Europe) Tel: +43 / 732 / 7090-3120 Fax: +43 / 732 / 7090-6301 E-Mail: kus@keba.com WWW: www.keba.com - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |